Provides an overview of the Industry Standards, as well as Code References, for the flashing materials used for the installation of Windows & Doors. The Code referenced material standards for window & door flashings are summarized and compared, as well as the Installation Standard practices that have been developed by the three main Fenestration Industry organizations. The Window & Door installation standards and principles presented, are also demonstrated through hands-on application using standard flashing materials with a focus on Commercial and Multi-Family Buildings....
View the DuPont Performance Building Solutions Course Library
With limited exceptions, the International Building Code® (IBC®) requires testing and compliance with NFPA 285 for exterior wall assemblies of buildings of Types I, II, III, and IV construction containing foam plastic insulation. This course examines three methods for demonstrating that an exterior wall assembly design complies with NFPA 285, including engineering analysis. The course also discusses how and where to locate NFPA 285 information for each compliance method....
View the North American Modern Building Alliance Course Library
Wind forces always influence building design and detailing. This course focuses on one particular force, wind uplift, and its influence on roof paving system design and selection. It examines how wind loads and building configuration affect the design of roof paving systems; the codes, regulations, and calculation approaches that inform and control such designs; and the various options designers can use to design safe, appealing outdoor roof paving systems that will withstand even the strongest winds....
Commercial building interiors see all kinds of wear and tear on a daily basis. Various forms of wall protection can combat this wear and tear to help extend the longevity of a space, maintain a clean look, and cut down on maintenance costs. This course discusses the different wall protection products available, how to identify which wall protection products fit certain applications, and which building codes apply to these products....
View the Construction Specialties Course Library
This course is part of one or more "Course Collections". Click here to view the details.
Insulated metal panels (IMPs) are lightweight composite exterior wall and roof panels with superior insulating properties. Commercial and industrial buildings benefit from their energy efficient insulation, lightweight construction, durability, and cost-effective, timely installation. This course discusses IMPs in terms of their design options, appropriate support structure, installation, function, code compliance, and warranties....
Having up-to-date specifications starts with understanding what is in the building code. This course reviews the requirements that cold-formed steel framing must meet to be compliant to the 2024 International Building Code. It covers the standards for manufacturing tolerances, minimum thickness and protective coatings. Participants will also review fire-rated partitions....
Energy codes at all levels increasingly focus on reducing energy consumption, saving consumers money, and reducing CO2 emissions. New and updated energy codes play an essential role in the performance of buildings. This course examines the lighting requirements and provisions of ASHRAE Standard 90.1-2019 and the 2021 International Energy Conservation Code® (IECC) and focuses on plug and lighting control strategies for energy efficiency....
This program is designed to provide the design community with an understanding of how energy efficiency impacts water management in wall systems and how to address the control layers of the envelope. The presentation will cover building science, code for bulk water, air, thermal, and vapor, and practical solutions for WRBs, drainage, and flashing....
View the DuPont Performance Building Solutions Course Library
This course discusses the code requirements for thermal and ignition barriers for spray polyurethane foam, the testing required, code requirements for vapor retarders depending on climate zone, and how these coatings are installed....
This course is aimed to define what exactly continuous insulation is, and the key benefits of using it. The course will also show participants how continuous insulation complies with building and energy code requirements within that field....
The use of automatic entrances and ICU/CCU doors helps solve the problems associated with both circulation and door openings in healthcare design while providing an aesthetically pleasing solution. Healthcare personnel, patients, security personnel, and visitors are constantly rushing and want instant access. Today people are very conscious of touching surfaces and prefer not to have contact with doors. Other issues that need to be addressed during design are movement of patients and equipment, ADA and building code compliance, security, energy conservation, and sustainability....
Authorities having jurisdiction all over the world, including in all 50 US states, have mandated photoluminescent egress path markings to support safe evacuation of high-rise buildings in the case of total power failure. This course reviews photoluminescent egress path marking requirements in the model International Building Code® and International Fire Code® (2015, 2018, 2021) and identifies compliant photoluminescent path marking products. The course also discusses recommended best practices that exceed code requirements, which will reduce building operation costs and improve occupant and first responder safety....
View the Safe-T-Nose Course Library
This course is part of one or more "Course Collections". Click here to view the details.
How to Achieve Superior Building Envelope Performance in Rainscreen Wall Design explores rainscreen wall design theory, how rainscreen walls control hygrothermal loads, and shortcomings of today’s multi-component backup wall assemblies used in rainscreen wall construction. The course will compare and contrast the common multi-component backup wall assembly with the single-component insulated metal composite backup wall system, and demonstrate how the latter overcomes deficiencies of the former in creating a building envelope with superior performance as well as other key benefits....
Polyisocyanurate (polyiso) insulation is one of North America’s most widely used, readily available, and cost-effective insulation products. While polyiso is currently most commonly known for its use on roofs and walls, this course focuses on the many benefits of using it in below-grade installations in order to meet energy codes, maximize the building foundation’s thermal performance, and extend the overall life of the structure. The course explores the requirements for three primary characteristics of any below-grade insulation—thermal performance, water absorption, and load capacity—and describes how polyiso meets or exceeds those requirements and protects the foundation waterproofing system....
View the Rmax - A Division of the Sika Corporation Course Library
Today's complex steel structures present numerous design challenges, including the challenge of fireproofing appropriately in order to ensure the safety and well-being of building occupants as well as protection of the structure itself. This course outlines the code and testing standards that inform fireproofing choices and the various passive fire protection products and methodologies that can address a comprehensive range of design challenges; insight into the proper specification of fire protection products as well as their ability to improve LEED® certification levels is also provided....
View the Isolatek International, Inc. Course Library
This course is part of one or more "Course Collections". Click here to view the details.
Ensuring compliance with increasingly stringent energy codes is a leading architectural challenge. This course explores the latest edition of the International Energy Conservation Code (IECC) with a focus on the building envelope and how to achieve – and exceed – energy performance requirements when building with masonry....
Recent changes in North America energy codes for the building envelope include higher insulation R-values, continuous insulation, and continuous air barriers for air leakage control. New, code compliant wall assembly design options may be susceptible to increased moisture sensitivity due to lower drying rates, which are inherent to energy efficient assemblies but could be further impacted by design detailing and materials choices. Improved energy efficiency does not need to come at the expense of the long term performance and durability of buildings. This seminar will address design options and materials choices for energy efficient and durable wall design. Design tools for advanced moisture analysis (WUFI®, Wärme und Feuchte Instationär, or Transient Heat and Moisture Analysis) will be used to show how to predict performance of untested new assemblies, how materials substitution could impact the overall performance of the building envelope, and how design detailing could increase moisture management capabilities....
View the DuPont Performance Building Solutions Course Library
This seminar will help you understand the impact of air leakage on building enclosure performance, current codes and standards for air leakage control with continuous air barriers and recent advances in implementing airtight buildings in practice. Air leakage can impact building energy performance, envelope durability and occupant's comfort. Air leakage control is generally addressed by energy codes. The US energy codes have only recently recognized the importance of air leakage. For example ASHRAE 90.1, IECC, ASHRAE 189.1, and IgCC have only recently introduced quantitative requirements for air barrier materials, assemblies or whole building airtightness. The US Army Corps of Engineers (USACE) recently introduced an air barrier program for building enclosure airtightness, which requires blower door test for whole building airtightness. This seminar will provide examples of successful implementation of USACE program....
View the DuPont Performance Building Solutions Course Library
One hour seminar detailing the use of Expansion Joint Covers. Designed to broaden knowledge of joint movement and proper joint sizing to ensure there is no structural damage or life safety issue. Contains an overview of both interior and exterior Expansion Joint Covers and which are most appropriate for certain conditions. Fire barriers are discussed and what's important to know regarding current testing requirements and how to specify them to meet current building codes....
This course will provide an overview of resilient design and discuss how resilient design is not covered by typical building codes and standards. The role of masonry construction in meeting resilient design goals is explained, and the inherent properties of masonry that make it resilient are described. There will be examples given in the presentation of resilient design strategies....
Dual-flush wall-mounted toilets help create modern, stylish bathrooms that strike a balance between sustainable water efficiency, flexible design, and space savings. This course compares this style with other traditional types of toilets, discusses how wall-mounted toilets benefit commercial and residential users, and explains how they satisfy the Americans with Disabilities Act (ADA) and other accessibility and building code requirements....
By design, automatic pedestrian doors provide easier, more convenient access than manual doors for a wide variety of building types, and their popularity in commercial design continues to grow. Reviewed in this course are the available options of automatic door solutions, including sliding, swinging, ICC/CCU, and revolving door systems. Also discussed are the code requirements and considerations relating to automatic doors for proper specification....
View the ASSA ABLOY Entrance Systems Course Library
This course is part of one or more "Course Collections". Click here to view the details.
Locating mechanical and electrical equipment on a roof is often necessary for space and efficiency in a building design. However, it can be challenging to provide a means for safe maintenance access while preserving the roof membrane and structural integrity and not interfering with other rooftop equipment. This course presents the components that comprise rooftop support systems designed to solve these challenges, as well as system design considerations and compliance with the International Building Code® (IBC®) and the International Mechanical Code® (IMC®)....
We will discuss how Polyiso Continuous Insulation will improve the thermal performance of walls of Steel Stud Construction. In addressing the advantages of continuous insulation, we will also address the disadvantages of using steel studs without continuous insulation. We will discuss what Sustainability is related to and how it is measured, including factors that are involved in addressing Building Longevity, and how these concepts impact making buildings more energy efficient. We will look at various types of products used to achieve code-compliant designs with a perspective that addresses sustainable construction. Looking towards the future we will discuss the actions being undertaken in conjunction with energy conservation and construction codes, building science organizations, and other groups in pushing proper building envelope design. We will also look at the history of Polyiso and how this product is produced from raw chemicals, creating a completed board stock product....
View the Rmax - A Division of the Sika Corporation Course Library
This course introduces expanded polystyrene (EPS) underslab insulation and examines its role in energy performance, moisture management, thermal control, vapor management, radon mitigation, and hydronic heating in residential and commercial buildings. The course supports project teams working toward LEED® v5 Building Design and Construction (BD+C) or Interior Design and Construction (ID+C) requirements by outlining how underslab insulation decisions influence compliance with thermal envelope provisions, energy modeling pathways, and material considerations within the rating systems....
