Fire safety and suppression are essential design features for building projects. This course explores how innovative water mist fire suppression systems can enhance occupant safety in homes while preserving aesthetics and minimizing water damage. Key design principles of electronically controlled water mist systems are examined, and their installation and maintenance are described. Also discussed is guidance for dealing with code officials when using these systems as an alternative to traditional fire sprinklers....
Knowing your building’s ideal water pressure and how to achieve that pressure is essential to your overall plumbing effectiveness and safety, patrons’ health and safety, and your water conservation efforts. Determining ideal water pressure is not straightforward and many factors should be considered including building use, physical characteristics, codes, and plumbing components. Many of today’s innovative plumbing products can contribute to water conservation and cost savings but it’s also essential that specific water pressure levels are provided for optimal operation....
View the Zurn | Elkay | Hadrian | World Dryer | Wilkins Course Library
Energy codes at all levels increasingly focus on reducing energy consumption, saving consumers money, and reducing CO2 emissions. New and updated energy codes play an essential role in the performance of buildings. This course examines the lighting requirements and provisions of ASHRAE Standard 90.1-2019 and the 2021 International Energy Conservation Code® (IECC) and focuses on plug and lighting control strategies for energy efficiency....
Wind forces always influence building design and detailing. This course focuses on one particular force, wind uplift, and its influence on roof paving system design and selection. It examines how wind loads and building configuration affect the design of roof paving systems; the codes, regulations, and calculation approaches that inform and control such designs; and the various options designers can use to design safe, appealing outdoor roof paving systems that will withstand even the strongest winds....
Architects and other design professionals have a critical role to play in reducing global greenhouse gas emissions through building design and product selection. The urgent need to reduce both operational and embodied carbon means that building designers must be familiar with transparency documents that facilitate low-carbon product selection. In this course, we review the types of carbon of concern, transparency documents that provide critical information, and tools for sourcing embodied carbon information. We also look at the contribution of insulated metal panels to both low embodied and low operational carbon buildings....
It’s imperative to have a dependable, well-designed fire protection system that helps save lives and property. This course is designed to advance awareness and understanding about the wide range of components, functionality, and benefits of today’s most innovative standpipe fire systems and how to select the optimal system for your design based on building type, codes, and other requirements....
View the Zurn | Elkay | Hadrian | World Dryer | Wilkins Course Library
Protected Roof Membrane Assemblies (PRMA) have unique design requirements since they are loosely laid, held in place with stone ballast, pavers, or vegetative materials. The International Building Code contains prescriptive requirements to guide design and specification of such systems. The standards reviewed in this program provide methods to design wind uplift resistance of ballasted and vegetated roofing systems. The standards are intended to be used as references for designing, specifying, and installing ballasted roofing systems, and are to be used in conjunction with the installation specifications and requirements from the manufacturers of the specific products in the system. For roofs that exceed the boundaries of these standards (meaning designs that are not covered in this document) the authority having jurisdiction is the only source for approval. ASCE 7 gives guidance on how non-standard conditions should be evaluated. See other references, or, utilize professional wind engineering consultants, or, conduct wind tunnel studies in accordance with ASCE 7 for information to determine requirements for designs or systems not covered....
Ensuring compliance with increasingly stringent energy codes is a leading architectural challenge. This course explores the latest edition of the International Energy Conservation Code (IECC) with a focus on the building envelope and how to achieve – and exceed – energy performance requirements when building with masonry....
When designing the building enclosure from the substrate to the cladding, architects and designers face a host of challenges, from energy code and NFPA 285 fire testing compliance, to ensuring aesthetically pleasing façade design. This course, featuring a panel of four different industry experts, explains design trade-off complexities and strategies to maximize flexibility while maintaining code compliance—and ultimately build a dependable, robust building façade. First, experts will review the challenges of choosing and placing an air and weather barrier. Secondly, codes and thermal bridging will be analyzed to determine insulation and thermal spacer selection. Finally, we will explore critical challenges associated with continuous insulation and the requirements of a rainscreen cladding system....
Newer energy codes require that homes be sealed and tested to 3-5 air changes per hour. Good home design and the right spec’s go along way to making that happen. Proper air sealing saves energy and reduces moisture and mold problems. In this advanced session 1 hour session building science expert Steve Easley uses pictures from the real world examples to illustrate what works and what doesn’t. Trying to fix a home that does meet these requirements is costly and time consuming, and improper sealing techniques can also lead to serious mold and moisture problems. Learn how to do it right the first time at the lowest cost, how to achieve the ”biggest bang for the buck" when prioritizing labor, and the best methods and materials to meet the newer code requirements....
View the DuPont Performance Building Solutions Course Library
We will discuss how Polyiso Continuous Insulation will improve the thermal performance of walls of Steel Stud Construction. In addressing the advantages of continuous insulation, we will also address the disadvantages of using steel studs without continuous insulation. We will discuss what Sustainability is related to and how it is measured, including factors that are involved in addressing Building Longevity, and how these concepts impact making buildings more energy efficient. We will look at various types of products used to achieve code-compliant designs with a perspective that addresses sustainable construction. Looking towards the future we will discuss the actions being undertaken in conjunction with energy conservation and construction codes, building science organizations, and other groups in pushing proper building envelope design. We will also look at the history of Polyiso and how this product is produced from raw chemicals, creating a completed board stock product....
View the Rmax - A Division of the Sika Corporation Course Library
Net zero energy ready buildings are a popular topic in today's world of climate change. This course explores how energy efficiency has expanded toward exterior wall assemblies, where thermal bridging and thermally broken subframing systems are becoming the new norm....
Lightweight, prefinished, and factory-fabricated insulated metal panels (IMPs) offer building owners a durable, cost-efficient, and easy-to-install roofing system that provides an air barrier, vapor barrier, and insulation all in one product. This course discusses the characteristics of IMPs and the installation process and explains why IMPs are ideally suited for pre-engineered and structural steel buildings. The role of IMPs in a building’s hygrothermal control layers and IMP code compliance are reviewed....
The presentation will the concept of Consolidated Control Layer Design and how to use it to determine the materials that will make the most efficient wall for your customers. We will define the Control Layers, discuss the Code Requirements for each layer, explain the Building Science behind the code requirements, and how that layer is related to the other (Thermal to Moisture, Moisture to Air, Air to Vapor, etc.) We will then discuss the Fire considerations that Impact Control layer design with today’s codes, including NFPA 285 Brief Overview as it has changed the way we design our above grade wall systems and types of continuous insulations that influence the design considerations with respect to fire and NFPA-285. Finally, solutions for consolidating these 4 layers for simplified design, superior performance, and long-lasting durability will be covered....
View the DuPont Performance Building Solutions Course Library
Mass timber, a type of building material and structural framing style, was recently adopted by the 2021 International Building Code, and as such is a rapidly growing building trend in the United States. When it comes to building systems in mass timber structures, product decisions must be thoroughly thought out early in design, allowing for efficient design modeling and a speedy construction phase. This course provides designers an overview of the updated IBC as it relates to mass timber building, as well as the many applications and challenges designers face when it comes to providing code-compliant and aesthetically pleasing power, data/communication, and AV throughout the building space....
The construction industry has experienced a significant increase in moisture-related problems in exterior walls. This presentation explains how a rainscreen wall system prevents moisture accumulation within walls by providing a means for drainage and ventilation, thereby prolonging the life of buildings. Discussion topics include air and moisture movement in the building envelope, building code and water-resistive barriers, and stucco and thin veneers in rainscreen systems....
Architects and other design professionals have a critical role to play in reducing global greenhouse gas emissions through building design and product selection. The urgent need to reduce both operational and embodied carbon means that building designers must be familiar with transparency documents that facilitate low-carbon product selection. In this course, we review the types of carbon of concern, transparency documents that provide critical information, and tools for sourcing embodied carbon information. We also look at the contribution of insulated metal panels to both low embodied and low operational carbon buildings....
This course reviews the evolution of accessible restrooms and the recent, sudden prominence of universal (or adult) changing tables. We’ll examine how new changes to both the International Building Code® and statewide legislation affect public restroom design, and the profound impact universal changing tables can have on the lives of people with disabilities and their caregivers....
This presentation includes information on continuous insulation performance and specific detail on polyisocyanurate insulation, an overview of the history of foam plastic insulation in the building codes, and a detailed review of the 2021 International Building Code’s fire safety requirements for the use of polyisocyanurate insulation in exterior walls of commercial buildings (Construction Types I-IV), including the NFPA 285 fire test standard....
View the PIMA - Polyisocyanurate Insulation Manufacturers Association Course Library
PIMA - Polyisocyanurate Insulation Manufacturers Association
A sound building envelope should be sustainable and provide fire resistance, good thermal performance, and protection from the elements. Mineral wool, fire rated insulated metal panels (IMPs) can improve building performance and contribute to a sustainable design strategy. Included in this course are discussions on mineral wool IMP characteristics and design options, performance advantages, and installation considerations. The course details how fire resistance is specified in the International Building Code and provides examples of fire wall and fire partition construction assemblies....
A naturally occurring radioactive gas, radon is a silent danger to our health. Colorless and odorless, it enters homes and structures through openings in the foundation and below-grade walls, becoming trapped in basements and other poorly ventilated areas. This course looks at methods of controlling radon, how it is addressed in building codes, the advantages of closed-cell spray polyurethane foam (ccSPF) over other insulation materials, and proper installation techniques....
By design, automatic pedestrian doors provide easier, more convenient access than manual doors for a wide variety of building types, and their popularity in commercial design continues to grow. Reviewed in this course are the available options of automatic door solutions, including sliding, swinging, ICC/CCU, and revolving door systems. Also discussed are the code requirements and considerations relating to automatic doors for proper specification....
View the ASSA ABLOY Entrance Systems Course Library
This course is part of one or more "Course Collections". Click here to view the details.
Presented by a subject matter expert on behalf of CENTRIA, a Nucor company. As part of a well-designed rainscreen system, single-skin metal panels offer unique aesthetic options combined with the assurance that the building envelope will withstand the effects of long-term exposure to the elements. This course compares common cladding types; presents single-skin metal panel materials, coatings, finishes, and design options; and examines using single-skin metal panels with a single-component barrier wall to form a complete rainscreen assembly....
Understanding building physics is critical to proper building envelope design. Examined here are practical concepts for the building designer, including how cladding systems perform across different climate zones and applications. Environmental control layers and hygrothermal loads are reviewed, as is the concept of perfect/universal wall design. The course focuses on how single-component insulated metal panels (IMPs) function as a perfect/universal wall, simplifying wall system design and installation....
Now more than ever, the environmental impacts of products used in construction are a worldwide concern and one that the architecture and design (A&D) community is being asked to address in their work. Environmental product declarations (EPDs) are powerful tools when choosing materials for commercial projects. This course discusses how, where, and why to use EPDs to inform sustainable product selection and specification decisions and how EPDs are incorporated into key green building rating systems and codes, including LEED® v4.1 Building Design and Construction (BD+C) and Interior Design and Construction (ID+C), Green Globes® for New Construction (NC), and the International Green Construction Code® (IgCC®)....
View the Resilient Floor Covering Institute Course Library
Resilient Floor Covering Institute
This course is part of one or more "Course Collections". Click here to view the details.
