Discover the basics of solar photovoltaic systems including the major parts for rooftop solar installations. Describe the basics of the rooftop installation mechanics and measures to minimize hazards and increase safety. Review critical parameters that should be considered when designing a roof to be solar ready. Reveal the advantages of installing solar on metal roofs, including performance and economic benefits....
Unwanted sound can become more than a mere annoyance. Excess noise has been found to increase stress and distraction, reduce learning and productivity, and even lead to hypertension and permanent hearing loss. This course presents an overview of how sound is described and measured and discusses the many industrial and architectural products available to control noise in virtually any environment....
No discussion about a material’s sustainability is complete unless it addresses embodied carbon, the carbon dioxide (CO₂) emissions associated with the material over its cradle-to-grave life cycle. Changes made to spray polyurethane foam (SPF) insulation formulations address the impacts of embodied carbon. This course explores the evolution and environmental impacts of SPF blowing agents, the performance benefits of SPF, physical property testing and certifications, and SPF’s potential LEED® v4 contributions. Case studies make evident the performance value of SPF....
Design guidelines for sustainable MVM buildings, Including product innovations and industry related education....
As incidents involving active shooters and gun-related assaults continue to increase, more buildings are adopting ballistic-rated products to enhance occupant safety. This course explores various levels of ballistic protection, relevant product testing standards, available solutions, and best practices for designing buildings that mitigate ballistic threats and safeguard both people and property....
View the USBP - United States Bullet Proofing, Inc. Course Library
The materials we use have a significant impact on the environment, our communities, and our health. Consequently, material transparency—wherein manufacturers disclose vital sustainability information about their products—is an increasingly necessary element of modern life. This course examines the tools and resources that are available for both manufacturers and the A&D community that effectively communicate transparency information and optimization of building products. Also reviewed are the benefits of the new-generation insulated metal panels (IMPs) designed to achieve a trusted range of health and wellness certifications....
As part of a well-designed rainscreen system, single-skin metal panels offer unique aesthetic options combined with the assurance that the building envelope will withstand the effects of long-term exposure to the elements. This course compares common cladding types; presents single-skin metal panel materials, coatings, finishes, and design options; and examines using single-skin metal panels with a single-component barrier wall to form a complete rainscreen assembly....
This Choosing the right insulation for your roof can having lasting impacts on the building performance and energy conservation. This presentation explains the different types of commercial insulation, long-term performance and liabilities, re-usability and sustainable roof design approaches for long term owner, occupant and maintenance benefits....
View the DuPont Performance Building Solutions Course Library
Rainscreens are a multicomponent system offering redundancy in resisting the weather; however, continuity of each component is critical. When an insulated metal panel (IMP) is used within the system, it can function as a number of these components, simplifying installation and improving performance. This course looks at IMPs acting as barrier walls behind various rainscreen systems, with a discussion on the performance characteristics for air, water, vapor, and thermal management....
This course will explore the fundamentals of architectural insulated metal panels, their performance benefits, and how insulated metal panels achieve air, water, vapor, and thermal control via a more advanced and cost-effective single component system that accelerates construction time. The course will also cover important design details to achieve your design intent and case studies that will showcase architectural insulated wall panels....
This course provides a general overview of air barriers- their role in building performance, the material options, and design considerations. Building code requirements and verification testing will be reviewed for an understanding of how to meet or exceed today’s performance requirements. General considerations will also be discussed to aid in selecting the best system and installation methods for specific projects....
Acoustical doors are vital in managing sound transmission in various architectural and industrial settings. This course discusses evaluating, specifying, and integrating acoustical doors into projects that demand effective noise control, speech privacy, and occupant comfort. It also examines how acoustical doors may help meet credit requirements in the LEED® v5 Building Design and Construction rating system and the WELL Building Standard™ version 2. Compliance with fire safety codes and SCIF specifications is also discussed....
One of the most complex and least understood areas where fire can propagate is at the perimeter of a multi-story building. Not only can fire spread from floor-to-floor via the edge-of-slab/curtain wall intersections but also along the exterior building enclosure where untested, combustible components are often installed. This program outlines best design practices for providing fire protection for building occupants per ASTM E2307 and E2874....
This course provides an overview of impacts from natural disasters and identifies solutions for building back better. It discusses the use of closed-cell polyurethane foams as well as other performance materials for disaster durable construction applications, including responding to flood and wind events using approved methods and materials....
Metal roofing is often preferred for retrofitting a low-slope roof due to its durability, ease of installation, energy efficiency, and water channeling capabilities. This course examines why metal roofs fail, the types of structural standing seam panels, and the pros and cons of different methods for recovering an existing low-slope roof....
As a significant contributor to global greenhouse gas emissions, the building sector has an immense opportunity to play a role in the efforts to mitigate climate change. This course will give an overview of the global move toward a more sustainable future. We will explore the latest state of knowledge on climate change, the targets, goals, and regulations set to mitigate its worst effects, and what you, as an architect, can do to help. You will also learn about the science behind embodied carbon and why it is important, as well as other tools and resources available to advance the overall sustainability of the built environment....
Designing to accommodate thermal movement is just one of the many critical details for the long-term success of a metal roof installation. This course covers the design and specification considerations and architectural details that impact project requirements, as well as the components and the energy-efficient features of metal roofing assemblies....
The use of sustainable materials and products during building design will become the standard within the construction industry, and environmental product declarations (EPDs) and Health Product Declarations (HPDs) help architects and owners make informed decisions for their projects. Insulated metal panels— a prime example of a sustainable product—are one of the most cost-effective solutions to reduce energy and greenhouse gases....
This course explores the role of motorized pergolas in shaping contemporary outdoor spaces that balance energy efficiency, occupant comfort, and architectural design. Participants will learn how these systems support sustainable performance goals, discover key considerations for successful integration, and review best practices for specifying louvered roof solutions in both residential and commercial projects....
Guided Manufacturing Plant Tour of Kemper System America's West Seneca, NY Facility. Tour includes a review of plant safety criteria (5 mins); QC & R&D labs (30 mins) introduction into various equipment used for ASTM and product testing; Warehouse tour (5 mins) including discussion of building design for containing potential spills to protect surrounding wildlife area; Distribution center (5 mins) discussions including QC process for incoming raw materials and outgoing products; Manufacturing overview (15 mins) showing machinery and processes for creating various liquid resins, primer, topcoats, & coatings....
Our learning objectives for this course all surround the core value & concepts of metal panel. We briefly Identify market sectors for architectural insulated metal panels. Understand the thermal performance advantages of insulated panels along with the basics of panel installation including wall framing requirements. Discuss how IMPs perform the necessary envelope control functions through a single component systems while accelerate speed of build. This course will also describe the aesthetics, design flexibility and integrated accessories available with architectural insulated metal panels....
The presentation reviews a brief history of architectural IMP’s, current trends with comparisons to other materials and explores developments which will lead to future aesthetic possibilities and performance enhancements....
The E107 Designing with Single Skin Metal Wall Panels program familiarizes the audience with metal wall panel design options. We will discuss the things to take into consideration to ensure a safe and aesthetically pleasing project by utilizing metal wall panels to meet the intended design. We will educate the proper way to design the wall panel assembly to make sure water is properly drained so it will not cause future concerns....
Architectural metal panels (AMPs) provide exceptional design versatility, enhancing both the aesthetics and functionality of a building. This course explores different types of panels, their applications, finishes, key design and specification considerations, and best practices to ensure the durability and performance of the panel system. Additionally, several project examples are presented to showcase the creative applications of AMP systems....
High-quality architectural stone veneer is a lower-cost, easier to install, sustainable alternative to natural stone. Though traditionally more often used in exterior applications, stone veneer is making its way into more interior applications across a wide variety of industries. This course will review performance and aesthetic characteristics of stone veneer and how it’s used in different applications. Learners will also explore how stone veneer contributes to biophilic design principles and helps architects specify for changing residential building trends....
Displaying 347 - 371 of 526 results.
FIRST PREV [297-321] [322-346] [347-371] [372-396] [397-421] NEXT LAST