Unwanted sound can become more than a mere annoyance. Excess noise has been found to increase stress and distraction, reduce learning and productivity, and even lead to hypertension and permanent hearing loss. This course presents an overview of how sound is described and measured and discusses the many industrial and architectural products available to control noise in virtually any environment....
In the wake of the green movement, combined with rising energy costs, building sustainability has become an important topic. This course examines how foil-faced polyisocyanurate (polyiso) continuous insulation can function as a multiple control layer, providing a building with an air and water-resistive barrier and a thermal control layer. Additionally, this course reviews building codes and standards for meeting the continuous insulation requirements in steel stud building envelope designs, the benefits of using polyiso insulation in wall assemblies, and how polyiso insulation meets NFPA 285 requirements....
View the Rmax - A Division of the Sika Corporation Course Library
Protected membrane roof (PMR) assemblies have been widely adopted in low-slope commercial buildings since the late 1960s. Also known as inverted or upside-down roofs, PMR assemblies move the waterproofing membrane from the top of the roof assembly to the surface of the structural deck. This course explores how PMR assemblies provide several advantages over conventional roof assemblies, offering superior protection against water penetration and enhanced energy efficiency. The course also shows how PMR assemblies allow for the creation of green roofs or blue roof systems. With a proven record of reliability, PMR assemblies present a compelling solution for architects seeking innovative, sustainable, and efficient roofing options....
View the DuPont Performance Building Solutions Course Library
Having an up to date specification starts with understanding what is in the building code. This course reviews the requirements that steel framing must meet to be compliant to IBC 2021. It covers the standards for manufacturing tolerances, minimum thickness and protective coatings. Participants will also review fire-rated partitions...
The beaches and proximity to the Atlantic Ocean are some of the advantages of living in Florida. However, the extreme wind forces from hurricanes can easily damage even the strongest buildings and cause billions of dollars in property loss. As a result, certain areas of Florida―Miami-Dade and Broward Counties—have been designated High Velocity Hurricane Zones. The building products used in these zones must be laboratory tested to meet extreme wind and pressure performance standards. This course explains why a metal roof system designed to minimize the damage from hurricanes is important....
A discussion on the increasing adoption of insulated roof decks in the North American, including descriptions on what insulated metal roof decks entail, comparisons of insulated metal roof decks with more traditional systems, and design considerations for insulated metal roof decks....
One of the most exciting developments in outdoor living is the arrival of ¾” thick porcelain outdoor pavers. The concept began to spark interest in 2012 and is continuing to grow in popularity. Outdoor porcelain pavers have the same benefits as regular porcelain –being frost-resistant, skid-resistant, durable and easy to clean – combined with incredibly high breakage loads (up to 2,000 pounds) creates the perfect solution for gardens, terraces and high traffic outdoor areas. Outdoor porcelain pavers can be dry laid onto grass, gravel, dirt and sand – or onto terraces and roofs using raised supports – without grout, adhesives or specialized workers, making installation incredibly easy....
Presented by a subject matter expert on behalf of CENTRIA, a Nucor company. As part of a well-designed rainscreen system, single-skin metal panels offer unique aesthetic options combined with the assurance that the building envelope will withstand the effects of long-term exposure to the elements. This course compares common cladding types; presents single-skin metal panel materials, coatings, finishes, and design options; and examines using single-skin metal panels with a single-component barrier wall to form a complete rainscreen assembly....
This course explores how airborne and structureborne noise affects building acoustics and impacts occupant focus, learning, healing, and overall well-being across offices, educational facilities, healthcare environments, and fitness spaces. Participants gain a foundational understanding of sound behavior, testing methods, and common misconceptions and learn how mass, resiliency, and decoupling are integrated into construction assemblies to achieve effective noise control and acoustic performance, in alignment with the LEED® v5 Building Design and Construction and Interior Design and Construction rating systems and the WELL Building Standard™ v2....
Insulated metal panels (IMPs) are known for their superior heat loss control, moisture and air resistance, and striking aesthetic capabilities. This course highlights how these attributes can be integrated to create beautiful, healthy, and safe buildings. It explains how IMPs achieve air, water, vapor, and thermal control via an advanced and cost-effective single-component system that accelerates construction time and offers design flexibility. The course includes essential design details and case studies that showcase the functional and aesthetic capabilities of IMPs. ...
Architects and other design professionals have a critical role to play in reducing global greenhouse gas emissions through building design and product selection. The urgent need to reduce both operational and embodied carbon means that building designers must be familiar with transparency documents that facilitate low-carbon product selection. In this course, we review the types of carbon of concern, transparency documents that provide critical information, and tools for sourcing embodied carbon information. We also look at the contribution of insulated metal panels to both low embodied and low operational carbon buildings....
Waterproof, fireproof, nonporous, and eco-friendly natural slate has great value as a building material, particularly given its ability to protect structures for generations. This course reviews the characteristics and properties of slate, presents some of the many design options, and provides guidance on sourcing and specification. The sustainability benefits of roofing slate are also discussed, from its extraction and low-impact processing to its strength and enduring properties in all weather conditions....
This course reviews the definition of sustainability, and how Environmental Product Declarations (EPDs) and Health Product Declarations (HPDs) are being used to address product transparency needs. We will review how IMPs provide all environmental control layers and how their use contributes to sustainable design. LCAs form the backbone of EPDs, and this course walks through the creation of EPDs as well as the environmental factors evaluated. HPDs are the latest tool used to study building product toxicity, and we will provide a complete review of how these important documents are prepared and used by owners, architects, designers and manufacturers. We finish up by studying how EPDs and HPDs are used in environmental rating systems such as LEED, Green Globes and Living Building Challenge....
This course outlines the dangers posed by Mother Nature and the science, codes, testing, and methods in which to build and combat these forces. In addition, this course addresses the value of continuous insulation to improve the conservation of energy in the building. We will also address how proper incorporation of materials, including continuous insulation and air and weather-barrier systems, will improve indoor air quality and contribute to environmental sustainability....
View the Rmax - A Division of the Sika Corporation Course Library
In today’s high performance building market, specifying materials that work together as a complete wall system is more critical than ever. Systems can help designers meet new energy codes, reduce costs and improve building function and sustainability while making the design process faster and simpler. This course will educate participants on the functional components and system attributes of the most common exterior wall system, steel stud with masonry veneer. The course will detail key system components such as continuous and stud cavity insulation, air/water resistive barriers, air sealing practices, masonry wall ties and water drainage/management practices. Key codes and standards will be reviewed to define system interaction and key specification practices to ensure wall system designs are consistent with recent advances in building analysis, new code requirements, revised test methods, and a comprehensive, systems approach to wall systems....
This program is designed to educate the audience on the processing of closed cell spray foam, its use in the commercial building envelope. It will also go into the proper application and safety required in using closed cell 2# spray foam. There will be some building science and discussion of air barriers. The program ends with discovering many other uses for closed cell spray foam....
Precast concrete pavers and roof deck systems enable designers to deliver on aesthetics and design objectives while achieving safety and durability requirements. Patented roof deck systems allow for the creation of safe and stable roof deck patios and green roofs that maintain sustainability requirements. This course examines the raw materials used in these systems, reviews the different finishes available, and discusses different paver applications and their methods of installation....
This course provides a general overview of air barriers- their role in building performance, the material options, and design considerations. Building code requirements and verification testing will be reviewed for an understanding of how to meet or exceed today’s performance requirements. General considerations will also be discussed to aid in selecting the best system and installation methods for specific projects....
Architectural metal panels (AMPs) provide exceptional design versatility, enhancing both the aesthetics and functionality of a building. This course explores different types of panels, their applications, finishes, key design and specification considerations, and best practices to ensure the durability and performance of the panel system. Additionally, several project examples are presented to showcase the creative applications of AMP systems....
Undesirable acoustics in educational spaces have long been considered averse to our goals to effectively teach, create, collaborate, listen, and learn. The impact on students’ academic achievement, social adaptation and mental health can be vast and long lasting. In this class we will examine impact of different sound problems and how introduce solutions to mitigate them. Learn about solutions that create synergy between the architecture and the classroom environment to optimize student learning, student recruitment, and teacher retention....
From performing arts centers and music schools to museums and Native American centers, Kalwall is proud to be a part of cultural facilities around the world. Culture is at the heart of our communities, and it’s our job to shine a light on the things that matter most. With natural, diffuse daylight improving visual acuity and boosting mood, there’s no better way to help people embrace culture....
Green or vegetative roof systems have become an effective means to address aesthetic and environmental issues and provide energy savings for building owners, while at the same time providing protection for a building and its contents through the use of a high-performance waterproofing system. This program describes the basics of vegetative roof systems and outlines some cost and construction considerations for designers....
This course features an overview discussion on the various types of roof coatings available for commercial construction projects, including the difference between acrylic, silicone, urethane and PMMA. It looks at how to correctly specify coatings for any type of project, including new construction, repair or remodel. It also reviews how reflective coatings contribute to sustainability efforts for both building owners and the overall environment....
The building envelope must withstand the effects of long-term exposure to the elements. This course explores rainscreen wall design and the control of hygrothermal loads. The traditional multicomponent backup wall assembly is compared with the single-component, insulated metal composite backup wall system, outlining key differences in design and construction and their overall effect on installation and performance....
As energy codes continue to push building envelopes to higher R-value performance, architects and designers are challenged with also managing the moisture flow within the envelope to minimize the risk of condensation and the potential for mold and corrosion. Advanced testing and analysis demonstrate how specifiers can utilize mineral wool as an exterior continuous insulation, and significantly reduce the risk of condensation and subsequent mold/corrosion damage in all climate zones....
Displaying 350 - 374 of 526 results.
FIRST PREV [300-324] [325-349] [350-374] [375-399] [400-424] NEXT LAST