The beautiful gray patina of zinc architectural metal has graced the rooftops of buildings in Europe for hundreds of years. This course examines the sustainable characteristics of zinc as a roofing material, including its 100% recyclability, zero VOC requirement, and low embodied energy production process. The life cycle analysis of zinc is examined, as is zinc’s long-term service life. Various types of roof and wall applications are also discussed....
View the Morin Corporation Course Library
This course is part of one or more "Course Collections". Click here to view the details.
This course outlines the dangers posed by Mother Nature and the science, codes, testing, and methods in which to build and combat these forces. In addition, this course addresses the value of continuous insulation to improve the conservation of energy in the building. We will also address how proper incorporation of materials, including continuous insulation and air and weather-barrier systems, will improve indoor air quality and contribute to environmental sustainability....
View the Rmax - A Division of the Sika Corporation Course Library
Installing snow retention systems on rooftop applications improves the safety of building occupants and can decrease the risk of property damage. This course identifies different snow guard styles and explains how each contributes to snow retention. Installation techniques are reviewed, and layout designs that maximize occupant safety and minimize hazards are also discussed....
Wind forces always influence building design and detailing. This course focuses on one particular force, wind uplift, and its influence on roof paving system design and selection. It examines how wind loads and building configuration affect the design of roof paving systems; the codes, regulations, and calculation approaches that inform and control such designs; and the various options designers can use to design safe, appealing outdoor roof paving systems that will withstand even the strongest winds....
Acoustical design requirements are frequently based on laboratory test data. Walls constructed in a lab for testing are built under ideal conditions and with high levels of precision. These walls also do not have any of the attachments or penetrations that are ubiquitous in real-world construction. Selecting a tested wall design that meets an STC requirement is not enough to provide adequate sound isolation in the real-world. To achieve good sound isolation it is imperative that designers understand how to treat the myriad of details that can compromise a wall's performance. These include: electrical boxes, hanging cabinets, window mullions, control joints, intersections, and more. In this presentation we: discuss why a detail is important for noise control, provide the acoustical impact of poor detailing based on test data (when available), and provide acoustical best practices for the details...
Architectural acoustic design focuses on managing airborne and impact sound within indoor and outdoor spaces. This course addresses the acoustic challenges associated with outdoor recreational spaces, focusing on the surge in pickleball popularity. Participants will learn the fundamentals of sound propagation in open-air environments and explore how modern acoustic products can reduce unwanted noise while maintaining functionality and the design intent. Acoustic solutions for indoor spaces requiring noise reduction are also covered, as well as the role of acoustic barriers in meeting the requirements of the LEED® v5 Building Design and Construction and Interior Design and Construction rating systems and the WELL Building Standard™ v2....
Most designers are aware that many room types require acoustic treatment. Some are aware of acoustic terms such as NRC. This presentation will take that knowledge to the next level. Learn about the strengths and weaknesses of room acoustics design standards with this overview of theory and design methodology. A special emphasis is placed on performance-oriented designs. Strategies for different project types will be presented....
This course explores how to use coil and extrusion coatings in the built environment, and how innovative coatings contribute to sustainability initiatives....
Understand the basics of standing seam metal roof and wall systems. Identify grade vs. gauge and their importance for standing seam metal roofs and walls. Discuss oil canning and why it is prevalent with some metals but not others. Describe how to achieve greatest energy efficiency with metal roofs and walls. Describe storage, handling, onsite vs. controlled environment manufacturing, and how to obtain the right warranty for the product and application....
Wall system applications are becoming more and more common in the building envelope industry today. Explore the science behind wall systems and the tangible benefits of incorporating this technology into building structures. There is an emphasis on the differences between air barriers and vapor barriers and which is the best given climate and wall assembly....
This course focuses on the rapidly growing data center industry and how critical it is to control noise for facility employees and residents living in neighboring areas and to follow city ordinances. The noise issues data centers pose for their workers and their external surroundings are examined, and practical solutions are reviewed....
Discover the correct selection, specification, engineering, and design process to create safe and permanent roof attachments for various needs. Learn how to properly identify rooftop thermal cycling and manage the correct installation process. Identify correct installation practices of any rooftop penetration to maintain weathertightness warranties. Learn how to meet local and national building code requirements and other safety specifications for various rooftop accessories. Discover the ease of installing rooftop safety equipment and accessories safely without voiding roof manufacturer warranties on metal roofs....
This course provides a general overview of air barriers- their role in building performance, the material options, and design considerations. Building code requirements and verification testing will be reviewed for an understanding of how to meet or exceed today’s performance requirements. General considerations will also be discussed to aid in selecting the best system and installation methods for specific projects....
This course examines the material composition, reinforcement types, and testing standards associated with styrene-butadiene-styrene (SBS) modified bitumen membranes. It explains how fiberglass, polyester, and combination reinforcements affect membrane strength, flexibility, and dimensional stability. The standards that establish testing methods for tensile strength, elongation, and long-term performance are covered in detail. The course also outlines how material selection and installation practices influence roof durability, moisture resistance, and occupant safety....
This course aims to educate learners about the chemistry of spray-applied polyurethane foam (SPF), its various applications in the construction industry, safe handling and installation, and its contribution to sustainable design. The advantages of using SPF are highlighted in terms of its benefits to energy conservation and fire safety. Its role as a high-performance air barrier that satisfies code and LEED® criteria and complies with various standards is also discussed....
Polyisocyanurate (polyiso) insulation is one of North America’s most widely used, readily available, and cost-effective insulation products. While polyiso is currently most commonly known for its use on roofs and walls, this course focuses on the many benefits of using it in below-grade installations in order to meet energy codes, maximize the building foundation’s thermal performance, and extend the overall life of the structure. The course explores the requirements for three primary characteristics of any below-grade insulation—thermal performance, water absorption, and load capacity—and describes how polyiso meets or exceeds those requirements and protects the foundation waterproofing system....
View the Rmax - A Division of the Sika Corporation Course Library
Protected Roof Membrane Assemblies (PRMA) have unique design requirements since they are loosely laid, held in place with stone ballast, pavers, or vegetative materials. The International Building Code contains prescriptive requirements to guide design and specification of such systems. The standards reviewed in this program provide methods to design wind uplift resistance of ballasted and vegetated roofing systems. The standards are intended to be used as references for designing, specifying, and installing ballasted roofing systems, and are to be used in conjunction with the installation specifications and requirements from the manufacturers of the specific products in the system. For roofs that exceed the boundaries of these standards (meaning designs that are not covered in this document) the authority having jurisdiction is the only source for approval. ASCE 7 gives guidance on how non-standard conditions should be evaluated. See other references, or, utilize professional wind engineering consultants, or, conduct wind tunnel studies in accordance with ASCE 7 for information to determine requirements for designs or systems not covered....
Insulated vinyl siding, known as insulated siding, is an exterior cladding that combines the protection and low maintenance of traditional vinyl siding with the energy efficiency of EPS foam. The composite results in an improvement in performance and aesthetics. This course discusses the benefits associated with installing insulated siding on new and renovation residential construction projects, and the range of architectural styles that can be achieved with the breadth of design and color options available....
In this one hour course, design professionals will take an in-depth look at the sustainable and versatile attributes of composite roofing solutions. The advantages of composite roofing systems will be examined, including long life-cycle, durability, and its ability to be specified in a wide array of applications and environments....
Roofing technologies have come a long way from labor-intensive BUR systems that achieved watertightness through redundancy. Today’s single-ply membranes are thin, light and reliable, and installation is safe and efficient. This course focuses on thermoplastic single-plies, particularly those that are PVC based, and explores their benefits and limitations as well as the important factors to consider when selecting a roof system, ranging from fastening techniques to warranties to sustainability....
Stormwater management is critical in an era when severe storms and sewer overflows are increasing in many areas. In urban contexts where open space is at a premium, using on-structure bioretention planters can be the ideal approach. This course explores the benefits of bioretention and how bioretention planters reduce peak flows and improve water quality. The course also discusses how bioretention planters should be designed, can perform as amenities, and contribute to meeting the requirements of green building certification programs....
From line-of-sight protection to blast and fire performance, Kalwall offers a safe solution across markets. Learn more about all the powerful security features of our translucent panels and how to use them to create the safety and security we all value....
Thermally controlled environments such as cold storage freezers and coolers, and food processing and packaging facilities take many different forms. Their performance and functionality depend on their project-specific requirements and can be affected by the conditions the materials and systems are subjected to. This course discusses how insulated metal panels (IMPs) perform the necessary functions to provide an effective energy-efficient building envelope and why they are suitable for use within temperature-controlled hygienic environments—where performance is critical....
Attic ventilation is an important component in proper structural design. By encouraging airflow, attic ventilation plays a key role in maintaining structural integrity, ensuring roof component durability, providing a healthy indoor environment, and minimizing energy consumption. Additionally, proper attic ventilation hinders or prevents mold growth, reduces interior pollutants, and acts as a pivotal fire prevention tool. This course looks at how attic ventilation systems work, the benefits they provide, and the associated building codes and regulations. ...
Historically, traditional waterproofing methods involve the placement of a barrier or membrane between the concrete and water. Unlike membranes and other surface systems, crystalline waterproofing is designed to make the concrete itself waterproof. This course discusses how crystalline waterproofing technology provides a high level of performance to concrete structures and what design professionals need to know in order to specify and understand how this chemical technology can improve building projects, cut costs, and help earn LEED® credits....
Displaying 371 - 395 of 523 results.
FIRST PREV [321-345] [346-370] [371-395] [396-420] [421-445] NEXT LAST