Green or vegetative roof systems have become an effective means to address aesthetic and environmental issues and provide energy savings for building owners, while at the same time providing protection for a building and its contents through the use of a high-performance waterproofing system. This program describes the basics of vegetative roof systems and outlines some cost and construction considerations for designers....
A comprehensive plant tour at our Rmax Facility. Observe the insulation manufacturing process step by step from the initial order to the finished product by observing the raw material used, the manufacturer of the panels on the production line, panel cutting and stacking, panel wrapping and storage....
View the Rmax - A Division of the Sika Corporation Course Library
When structural stability and thermal continuity collide, structure has historically taken precedence necessitating tradeoffs such as increased insulation in other areas or acceptance of energy loss and potential moisture damage. The foundation transition from below grade to masonry ledge to masonry veneer wall is one such challenge. What if there was a solution? This presentation explores solutions for perimeter foundation insulation including information needed to specify and install correctly....
This course is an overview of the advantages and design considerations, of utilizing insulated metal panels as part of a high performance building envelope strategy for cold storage projects and those in which a temperature controlled environment is vital. In addition to providing superior thermal performance and air tightness, insulated metal panels can accelerate speed of build and allow for greater design flexibility. As well, Insulated metal doors can play a huge role in the success of your project; this course examines the benefits associated with both insulated metal panels and various types of insulated doors....
This course discusses the unique considerations when installing pre-applied/blindside waterproofing for below grade waterproofing applications. It reviews the science behind any below grade waterproofing project but with a focus on pre-applied or “blindside” waterproofing best practices – including looking at the different product types and design considerations, as well as the pre-planning, decision making, and application techniques that these demanding waterproofing projects require....
With the advent of “cool” single-ply roofs featuring heat-reflective exterior surfaces and the use of mechanical attachment, new questions have emerged concerning the internal forces at play within the roofing system, especially in regard to vapor movement and the potential for moisture condensation within the roof. This course reviews the fundamentals of vapor movement in roofing systems, current roof condensation research and the tools available to assess roof condensation. It also provides the building design professional with strategies to deal effectively with moisture movement within the roofing system....
Unwanted sound can become more than a mere annoyance. Excess noise has been found to increase stress and distraction, reduce learning and productivity, and even lead to hypertension and permanent hearing loss. This course presents an overview of how sound is described and measured and discusses the many industrial and architectural products available to control noise in virtually any environment....
There is an extremely wide array of coated or composite fabrics available on the market, each type formulated for specific uses and with different levels of performance and quality. To assist in the decision-making process, standards have been developed to show product performance, facilitate quality control, and assure designers that the product they are specifying is suitable for normal commercial use. This course briefly outlines the history, properties, and uses of coated fabrics, the intent and content of one coated fabric standard, and the testing protocols that support it....
View the Coated Fabrics and Film Association Course Library
Coated Fabrics and Film Association
This course is part of one or more "Course Collections". Click here to view the details.
This course focuses on the rapidly growing data center industry and how critical it is to control noise for facility employees and residents living in neighboring areas and to follow city ordinances. The noise issues data centers pose for their workers and their external surroundings are examined, and practical solutions are reviewed....
The construction industry has experienced a significant increase in moisture-related problems in exterior walls. This presentation explains how a rainscreen wall system prevents moisture accumulation within walls by providing a means for drainage and ventilation, thereby prolonging the life of buildings. Discussion topics include air and moisture movement in the building envelope, building code and water-resistive barriers, and stucco and thin veneers in rainscreen systems....
Tour of Westlake Royal Stone plant allowing participants to observe the manufacturing process and to engage participants in understanding the processes, materials, and quality standards of cultured stone, and to increase understanding of the installation methods for this high quality, durable masonry product....
Undesirable acoustics in educational spaces adversely affect the learning and teaching processes. The impact on students’ academic achievement, social adaptation, and mental health can be profound and long lasting. This course examines the impact of different sound problems and presents solutions that create synergy between the architecture and the classroom environment to optimize student learning and engagement and teacher retention....
Attic ventilation is an important component in proper structural design. By encouraging airflow, attic ventilation plays a key role in maintaining structural integrity, ensuring roof component durability, providing a healthy indoor environment, and minimizing energy consumption. Additionally, proper attic ventilation hinders or prevents mold growth, reduces interior pollutants, and acts as a pivotal fire prevention tool. This course looks at how attic ventilation systems work, the benefits they provide, and the associated building codes and regulations....
Partitions used for sound isolation are often required to also provide fire resistance. This is especially true in multi-family construction where the vast majority of unit demising walls and floor/ceiling assemblies must be fire rated. Solid working knowledge of fire-resistive designs is essential for architects to design acoustic partitions that can actually be built on-site. There are many design elements that work well for fire and for acoustics, but there are also areas where what works well for fire can be at odds with what works well for acoustics. In this presentation, we will look at the elements of acoustic and fire design both for basic wall and floor/ceiling assemblies and for design details like wall-wall and wall-ceiling intersections...
No discussion about a material’s sustainability is complete unless it addresses embodied carbon, the carbon dioxide (CO₂) emissions associated with the material over its cradle-to-grave life cycle. Changes made to spray polyurethane foam (SPF) insulation formulations address the impacts of embodied carbon. This course explores the evolution and environmental impacts of SPF blowing agents, the performance benefits of SPF, physical property testing and certifications, and SPF’s potential LEED® v4 contributions. Case studies make evident the performance value of SPF....
This presentation will focus on the science of noise control, specifically covering full system principles, building philosophy, and the most overlooked component when assembling such systems. The course will also highlight the forces that create the need for noise control systems, and how those forces shape how we approach these systems....
This course explores how to use coil and extrusion coatings in the built environment, and how innovative coatings contribute to sustainability initiatives....
Acoustical doors are vital in managing sound transmission in various architectural and industrial settings. This course discusses evaluating, specifying, and integrating acoustical doors into projects that demand effective noise control, speech privacy, and occupant comfort. It also examines how acoustical doors may help meet credit requirements in the LEED® v5 Building Design and Construction rating system and the WELL Building Standard™ version 2. Compliance with fire safety codes and SCIF specifications is also discussed....
The impacts of noise on occupancy health and wellness must be taken seriously. By understanding the importance of good noise control, learners will be able to understand the link between acoustic control and health, well-being, learning and productivity. This course will describe different scenarios like healthcare facilities, schools and offices. The course will give you an insight into the different sound absorbing materials that can be used to improve room acoustics. In addition, we will discuss best practices using different solutions such as incorporating Melamine Foam as a sound absorbing material in different scenarios...
Stormwater management is critical in an era when severe storms and sewer overflows are increasing in many areas. In urban contexts where open space is at a premium, using on-structure bioretention planters can be the ideal approach. This course explores the benefits of bioretention and how bioretention planters reduce peak flows and improve water quality. The course also discusses how bioretention planters should be designed, can perform as amenities, and contribute to meeting the requirements of green building certification programs....
This course title emphasizes the focus on prioritizing safety in horizontal access design, specifically for roof hatches and floor doors. It highlights the importance of creating secure access solutions while also incorporating daylight solutions through skylights. Attendees can expect to learn about best practices, safety considerations, and design strategies for designing safe horizontal access points. Additionally, the course will provide insights into effectively specifying skylights to optimize daylight penetration, enhancing the overall illumination in areas accessed through roof hatches and floor doors....
Stucco is a popular and durable finishing material that offers many benefits, combining safety and affordability while satisfying aesthetic needs. It can be applied to various surfaces using a lath system, which provides support for stucco. However, the quality of the stucco lath embedment can greatly affect its performance. This course covers the proper technique for achieving lath embedment, the different types of metal lath and their various applications, and regional material preferences....
Structural laminated decking allows the beauty of the wood structure to be exposed, creating a unique architectural experience for its occupants. Aesthetics, strength, and durability are combined in one engineered product. Structural laminated wood decking is an environmentally sustainable and cost-effective alternative to solid timber and other roof systems. This course discusses the characteristics of laminated wood decking and reviews recommended design, specification, and installation practices....
Asphaltic-rubber membranes play a crucial role in the successful implementation of below-grade foundation waterproofing by forming a monolithic, flexible layer that protects the foundation and supports its long-term structural integrity. Presented is an overview of dampproofing and waterproofing, preparation requirements for foundation design, hydrostatic pressure, and positive- and negative-side waterproofing. Also discussed are the design of below-grade, vertical foundation waterproofing applications and guidelines for proper specifications. The course compares waterproofing membrane technologies and addresses insulation, drainage, and backfill requirements....
Understanding building physics is critical to proper building envelope design. Examined here are practical concepts for the building designer, including how cladding systems perform across different climate zones and applications. Environmental control layers and hygrothermal loads are reviewed, as is the concept of perfect/universal wall design. The course focuses on how single-component insulated metal panels (IMPs) function as a perfect/universal wall, simplifying wall system design and installation....
Displaying 389 - 413 of 524 results.
FIRST PREV [339-363] [364-388] [389-413] [414-438] [439-463] NEXT LAST