Manufacturers, industry groups, architects, designers, and homeowners all share an expectation of safety in the buildings we occupy and use every day. This course discusses the key chapters where important exterior wall fire provisions can be found in the International Building Code® and examines many common features of global fire incidents. The ...
View the North American Modern Building Alliance Course Library
As part of a well-designed rainscreen system, single-skin metal panels offer unique aesthetic options combined with the assurance that the building envelope will withstand the effects of long-term exposure to the elements. This course compares common cladding types; presents single-skin metal panel materials, coatings, finishes, and design options;...
This presentation will discuss the importance of a properly prepared substrate for floor covering installation. Accurate floor preparation helps keep floors leveled, sealed, durable and long-lasting, which can reduce cost and material consumption in construction. The presentation provides an overview of the history of gypsum, best floor installatio...
This course provides an overview of impacts from natural disasters and identifies solutions for building back better. It discusses the use of closed-cell polyurethane foams as well as other performance materials for disaster durable construction applications, including responding to flood and wind events using approved methods and materials....
Studies show that a breathable self-adhering roofing underlayment has the ability to: Provide drying Ease installation Extend the life of the roof assembly This course investigates current knowledge of breathable, vapor-open (permeable) roofing underlayments and their ability to mitigate water intrusion, reduce long-term exposure to wetted substrat...
An introduction to the history, manufacturing, and use of Polyisocyanurate Insulation in Commercial and Residential Construction and address how these products can contribute to energy efficiency, fire safety, sustainability, and a healthier indoor environment....
View the Rmax - A Division of the Sika Corporation Course Library
Slate has been used for centuries as a long-lasting building material, and its natural beauty is unsurpassed. Today, rainscreen cladding systems have been developed to adapt natural slate to new architectural demands for sustainable building design approaches. This course explores the energy efficiency and moisture management benefits of a rainscre...
Continuous insulation is part of building standards and state and energy codes due to its ability to reduce thermal bridging and the associated heat loss and energy consumption. This course looks at the use of polyisocyanurate as a continuous insulation in Type V and residential construction and its use as a multifunctional envelope component—air...
View the PIMA - Polyisocyanurate Insulation Manufacturers Association Course Library
PIMA - Polyisocyanurate Insulation Manufacturers Association
This presentation includes information on continuous insulation performance and specific detail on polyisocyanurate insulation, an overview of the history of foam plastic insulation in the building codes, and a detailed review of the 2021 International Building Code’s fire safety requirements for the use of polyisocyanurate insulation in exterior...
View the PIMA - Polyisocyanurate Insulation Manufacturers Association Course Library
PIMA - Polyisocyanurate Insulation Manufacturers Association
Learn about PROSOCO products, tools and resources to support the design, specification, training and implementation phases of your next project. From restoration, retrofit and adaptive reuse to LEED, WELL and Living Building qualifying builds, we have the products and the people to help you realize your vision....
Meet the PROSOCO technical team and learn about how we can support your next project. The Consolideck line features products for preparing, hardening, decorating, protecting and maintaining finished concrete floors, whether the desired aesthetic is a matte finish or a highly polished showroom floor. Learn about important resources for the design ph...
Fenestration openings are a critical component of a building envelope, especially in present-day sustainable, energy-efficient buildings. Building envelopes play an important role in controlling the movement of heat, bulk water, and water vapor. Designing fenestration openings for buildings that use continuous exterior insulation has a significant ...
An introductory course on spray polyurethane foam (SPF) that covers component chemistry, different types of SPF, and the proper use of SPF in construction applications. In addition, the course addresses code compliance related to SPF for residential and commercial construction across the US and Canada markets, as well as safe SPF installation pract...
Participants will learn first-hand through instruction and observing the manufacturing process of how insulated metal roof and wall systems are made. Guests will tour the plant floor, testing areas, and storage yards, getting a preview of insulated metal panel systems to be installed throughout the country. Additionally, because of the highly speci...
No discussion about a material’s sustainability is complete unless it addresses embodied carbon, the carbon dioxide (CO₂) emissions associated with the material over its cradle-to-grave life cycle. Changes made to spray polyurethane foam (SPF) insulation formulations address the impacts of embodied carbon. This course explores the evolution and...
Newer energy codes require that homes be sealed and tested to 3-5 air changes per hour. Good home design and the right spec’s go along way to making that happen. Proper air sealing saves energy and reduces moisture and mold problems. In this advanced session 1 hour session building science expert Steve Easley uses pictures from the real world exa...
View the DuPont Performance Building Solutions Course Library
Sustainable building envelopes demand high performance from and proper installation of continuous insulation and air, water, and vapor control layers. What happens when thousands of holes are made in these materials as they are installed with blind fasteners, one layer on top of another by different subcontractors? Sequencing issues can generally n...
The construction industry has seen a substantial increase in moisture-related issues in exterior walls. This presentation will discuss how a rainscreen wall system prevents moisture build-up within walls by providing a means for drainage and ventilation. The presentation provides an overview of rainscreen principles and explains how to incorporate ...
Modular metal panels (MMPs) integrate advanced technology with modern aesthetics, providing high-performance building envelopes that enhance design and durability. This course explores the evolution of MMPs and what distinguishes them from other building products. You will examine the key components that make up the system and its fundamental princ...
Understanding the performance of building materials in real-world conditions is key to a successful building design. Recent studies have shown that the commonly reported R-values of polyisocyanurate foams at room temperature may overstate their real-world performance in cooler temperatures, potentially resulting in gaps in designed building enclosu...
View the DuPont Performance Building Solutions Course Library
This is a Product SpotLight Presentation. Discover how ArmorWall™ enables fast, hassle-free cladding attachment—preserving R-value and simplifying installation. Learn how it supports multiple cladding types and the science-backed method for installing stucco over the system using ASTM 1063 and ArmorDry™...
View the DuPont Performance Building Solutions Course Library
From pitched to low slope roofing a myriad of designs are possible. Conventional roofing with the waterproofing membrane located weather-side and Protected Membrane roofing with the waterproofing membrane located at the deck can be used on buildings of various end-use, be low or high albedo surfaced (solar gain). Add to this vegetative roof assembl...
View the DuPont Performance Building Solutions Course Library
The presentation reviews a brief history of architectural IMP’s, current trends with comparisons to other materials and explores developments which will lead to future aesthetic possibilities and performance enhancements....
A sound building envelope should be sustainable and provide fire resistance, good thermal performance, and protection from the elements. Mineral wool, fire rated insulated metal panels (IMPs) can improve building performance and contribute to a sustainable design strategy. Included in this course are discussions on mineral wool IMP characteristic...
This course is designed to help the commercial building team understand how to best use new products introduced into the market for building enclosures. These innovative products and systems assist in combining multiple steps of a traditional commercial exterior assembly, such as structure, fire, water, air, thermal, vapor, and acoustic control lay...
View the DuPont Performance Building Solutions Course Library
