This course presents and explains commercial building energy code and building code requirements that are inter-related and vary across US climate zones for building thermal envelopes. The course focuses on coordinating building code vapor control requirements and energy code insulation requirements with a particular focus on optimizing the value of continuous insulation on frame wall assemblies by leveraging the multi-functional capabilities of foam plastic insulating sheathing. Practical technical resources and useful design tools also will be shared to help efficiently optimize walls for code compliance and performance....
View the DuPont Performance Building Solutions Course Library
Manufacturers, industry groups, architects, designers, and homeowners all share an expectation of safety in the buildings we occupy and use every day. This course discusses the key chapters where important exterior wall fire provisions can be found in the International Building Code® and examines many common features of global fire incidents. The course also describes the NFPA 285 fire test and discusses the new Annex B in the 2023 edition of NFPA 285. Finally, there is a discussion of the code compliance pathways when exterior walls are required by the IBC® to be tested and comply with NFPA 285....
View the North American Modern Building Alliance Course Library
This presentation will review the basics of spray polyurethane foam chemistry, application, safety, code compliance, and building performance. It discusses safety requirements during the foam application, how spray foam can contribute to improved indoor air quality by reducing air leakage, how spray foam creates a more comfortable environment, and improves a buildings energy efficiency leading to reduced energy consumption and lowering a buildings impact on the environment....
NFPA 285 is defined as: the Standard Fire Test Method for Evaluation of Fire Propagation Characteristics of Exterior Non-Load-Bearing Wall Assemblies Containing Combustible Components. NFPA 285 assembly tests are required when exterior non-combustible walls contain combustible components per the International Building Code (IBC). The scope of materials classified by the IBC requiring NFPA 285 testing is increasing. Combined with more stringent energy code requirements, the use of combustible materials is also growing in exterior walls. The most common contributing factors to non-compliance of designs requiring NFPA 285 assembly testing include: −Lack of understanding of applicability of test on exterior wall assemblies. −Recent building and energy code changes causing new triggers for the test. −Lack of understanding of assembly vs. product results for NFPA 285 tests. This seminar will discuss the impact of the NFPA 285 Test on buildings using IBC-2018, the parameters and history of NFPA 285, which building envelope components are combustible and require NFPA 285 testing per IBC, and the paths to NFPA 285 code compliance that a designer can take. These elements all combine to integrate NFPA 285 compliant assemblies into building envelope systems....
View the DuPont Performance Building Solutions Course Library
Expansion or modification of electrical cabling is rarely considered yet occurs during the lifetime of most buildings. Expansion of in-wall cabling requires additional work, trades, and possibly electrical service interruption, but cable tray facilitates removal and addition of cabling. This course reviews two types of cable tray—ladder tray and wire mesh tray—their components, characteristics, and applications and code-related installation information....
View the Legrand Course Library
This course is part of one or more "Course Collections". Click here to view the details.
This course will provide attendees with valuable information and context endeavoring to help improve a practical understanding of the International Wildland-Urban Interface Code (IWUIC) and its implications on the uses of certain combustible building materials in the building envelope. The course will discuss how the International Wildland-Urban Interface Code (IWUIC) is designed and structured to supplement other I-Codes (e.g., the International Building Code (IBC) and International Residential Code (IRC)) as opposed to exist as a stand-alone code. Course content will include helpful background and theory behind the wildfire hazards the IWUIC is intended to mitigate. Most importantly, the course will provide attendees with understanding and examples of how combustible building materials and assemblies are suitable, viable options for use in construction under the IWUIC and capable of complying with the applicable requirements....
View the North American Modern Building Alliance Course Library
The key to an energy-efficient metal building is the implementation of a continuous insulation system that virtually eliminates thermal bridging and prevents condensation. This course discusses how using thermal spacer blocks and metal building insulation in the building envelope increases energy performance, protects against condensation, and meets stringent energy code requirements....
This course defines the latest code and testing requirements for water, air, and fire considerations in exterior wall assemblies. Participants will learn the various options for water and air control while exploring various wall assembly designs. In addition, participants will be introduced to building science analysis tools to recognize the impact of various designs on long-term building performance....
View the DuPont Performance Building Solutions Course Library
Tour a single-skin metal panel manufacturing facility to discover the ins and out of metal panel production. From attaining quality raw materials, assurance of a precise finish coat and measuring quality control specifications prior to being loaded for roll forming, metal breaking or bent into a modular metal panel by a completely autonomous line. See first-hand through the process cycle how quality panels lend to create a building envelope able to withstand the effects of long-term exposure to the elements. All this while striving to be part of the safest metal handling companies in the world....
The use of automatic entrances and ICU/CCU doors helps solve the problems associated with both circulation and door openings in healthcare design while providing an aesthetically pleasing solution. Healthcare personnel, patients, security personnel, and visitors are constantly rushing and want instant access. Today people are very conscious of touching surfaces and prefer not to have contact with doors. Other issues that need to be addressed during design are movement of patients and equipment, ADA and building code compliance, security, energy conservation, and sustainability....
Today's complex steel structures present numerous design challenges, including the challenge of fireproofing appropriately in order to ensure the safety and well-being of building occupants as well as protection of the structure itself. This course outlines the code and testing standards that inform fireproofing choices and the various passive fire protection products and methodologies that can address a comprehensive range of design challenges; insight into the proper specification of fire protection products as well as their ability to improve LEED® certification levels is also provided....
View the Isolatek International, Inc. Course Library
This course is part of one or more "Course Collections". Click here to view the details.
Stairs are an essential component of a movement and wayfinding strategy in a structure and a primary means of egress, exit, and floor-to-floor access in the event of a fire or emergency for buildings with multiple floors or a change in rise. This course discusses stair and egress system design and evaluates why the design and fabrication of pre-engineered steel stairs create safe stair environments that comply with building codes....
The purpose of this course is to educate architects and designers on the ideal ways of incorporating entrance flooring into commercial buildings to promote a safe and clean environment. The course explains codes, regulations and guidelines specifically related to entrance flooring systems for high-traffic entrances in healthcare, education, transportation, corporate and other commercial settings....
Understanding how insulated metal panels comply with fire safety regulations under the code is critical to their proper use in creating highly energy-efficient and sustainable buildings. This course takes a relatively complex subject and addresses the most important fire safety aspects to allow building designers to make an informed decision on the use of these popular cladding systems. Also reviewed are how these products have been addressed in the development of the International Building Code and the various third-party product listings, evaluation reports, and engineering judgements used to show compliance....
This presentation will cover what civil engineers need to know when utilizing segmental retaining walls for grade separation in their site development plans. The presentation will introduce participants to the National Concrete Masonry Association’s Best Practices Guide for Segmental Retaining Walls focusing on recommendations relevant to Civil Engineers and discuss how they are applied to enhance the safety and longevity of structural segmental walls. Topics will include risks associated with using a “design by others” approach to segmental retaining walls and the importance of geotechnical engineering support. The presentation will address how building foundations, footers, pond applications, and fencing/guardrail codes impact the design and construction of segmental walls....
Code-mandated requirements for inspections first appeared in the Uniform Building Code in 1927, and their original intent is still recognizable in our current codes: inspections by a building official are required at specific points in the construction process. In this course, we will examine an alternative to the periodic inspection process, the full-time inspector of record (IOR). We’ll review the historical context and qualifications of the IOR, when a project may benefit from an IOR, and the impact of using an IOR on life safety and property damage....
View the AEC Daily Course Library
This course is part of one or more "Course Collections". Click here to view the details.
Wood-plastic composite cladding offers a pleasing aesthetic and exceptional durability as part of a rainscreen assembly, enhancing the performance and longevity of the building envelope. Presented here are the functions and components of Lstiburek’s “perfect (universal) wall” design and a drained and ventilated rainscreen assembly. The course explores the composition, manufacture, benefits, design possibilities, and installation of wood-plastic composite cladding, as well as compliance with building codes and standards....
Acoustical doors are vital in managing sound transmission in various architectural and industrial settings. This course discusses evaluating, specifying, and integrating acoustical doors into projects that demand effective noise control, speech privacy, and occupant comfort. It also examines how acoustical doors may help meet credit requirements in the LEED® v5 Building Design and Construction rating system and the WELL Building Standard™ version 2. Compliance with fire safety codes and SCIF specifications is also discussed....
This course provides an overview of the industry standards and code references for flashing materials used in the installation of windows and doors. The code-referenced material standards for window and door flashings are summarized and compared, and the standard installation practices developed by the three main fenestration industry organizations are reviewed. Applications of the window and door installation standards and principles are shown using standard flashing materials with a focus on commercial and multifamily buildings....
View the DuPont Performance Building Solutions Course Library
Authorities having jurisdiction all over the world, including in all 50 US states, have mandated photoluminescent egress path markings to support safe evacuation of high-rise buildings in the case of total power failure. This course reviews photoluminescent egress path marking requirements in the model International Building Code® and International Fire Code® (2015, 2018, 2021) and identifies compliant photoluminescent path marking products. The course also discusses recommended best practices that exceed code requirements, which will reduce building operation costs and improve occupant and first responder safety....
View the Safe-T-Nose Course Library
This course is part of one or more "Course Collections". Click here to view the details.
Join us for our webinar series with a focus on retrofit projects. The design challenges facing architects and builders when renovating older buildings are considerable, from increasing energy efficiency to navigating inherited structural and building code changes. Kalwall is a lightweight, rapidly installed and beautiful solution for bringing old buildings into the modern, daylit, era. Learn more about how Kalwall can help you accomplish a retrofit on budget and on schedule....
Protected Roof Membrane Assemblies (PRMA) have unique design requirements since they are loosely laid, held in place with stone ballast, pavers, or vegetative materials. The International Building Code contains prescriptive requirements to guide design and specification of such systems. The standards reviewed in this program provide methods to design wind uplift resistance of ballasted and vegetated roofing systems. The standards are intended to be used as references for designing, specifying, and installing ballasted roofing systems, and are to be used in conjunction with the installation specifications and requirements from the manufacturers of the specific products in the system. For roofs that exceed the boundaries of these standards (meaning designs that are not covered in this document) the authority having jurisdiction is the only source for approval. ASCE 7 gives guidance on how non-standard conditions should be evaluated. See other references, or, utilize professional wind engineering consultants, or, conduct wind tunnel studies in accordance with ASCE 7 for information to determine requirements for designs or systems not covered....
When considering the building enclosure, fire safety is an important design factor and needs to be considered hand-in-hand with energy code requirements. The NFPA 285 “Standard Fire Test Method for Evaluation of Fire Propagation Characteristics of Exterior Non-Load-Bearing Wall Assemblies Containing Combustible Components” is a critical consideration with modern building assemblies incorporating combustible materials in non-combustible construction. This presentation will review the history and scope of the NFPA 285 test standard, and its adoption within the International Building Code (IBC). It will outline the criteria for compliance, as well as identify triggers and contributors under the standard. The presentation will review how the selection building components such as insulation, air/water resistive barriers and claddings, can affect the fire performance of an assembly, and identify solutions and common paths for compliance....
View the DuPont Performance Building Solutions Course Library
Having an up to date specification starts with understanding what is in the building code. This course reviews the requirements that steel framing must meet to be compliant to IBC 2021. It covers the standards for manufacturing tolerances, minimum thickness and protective coatings. Participants will also review fire-rated partitions...
Recent changes in North America energy codes for the building envelope include higher insulation R-values, continuous insulation, and continuous air barriers for air leakage control. New, code compliant wall assembly design options may be susceptible to increased moisture sensitivity due to lower drying rates, which are inherent to energy efficient assemblies but could be further impacted by design detailing and materials choices. Improved energy efficiency does not need to come at the expense of the long term performance and durability of buildings. This seminar will address design options and materials choices for energy efficient and durable wall design. Design tools for advanced moisture analysis (WUFI®, Wärme und Feuchte Instationär, or Transient Heat and Moisture Analysis) will be used to show how to predict performance of untested new assemblies, how materials substitution could impact the overall performance of the building envelope, and how design detailing could increase moisture management capabilities....
View the DuPont Performance Building Solutions Course Library
