This course explores how an innovative, scalable, and economical cold-formed steel column and composite beam framing system addresses common primary framing challenges to reach the roof faster and deliver stronger, more cost-effective, and sustainable projects. This well-proven, ICC-compliant system reduces dependencies on multiple trades and minimizes the number of handoffs, supporting schedule compression, which then translates directly into earlier openings, faster revenue generation, and reduced labor costs. The system is applicable to a range of housing, hotel, and commercial mid-rise projects in all climates and geographies....
This course explores how to use coil and extrusion coatings in the built environment, and how innovative coatings contribute to sustainability initiatives....
Based on published studies, a vented rainscreen assembly provides the following for a wall assembly: • Effectively drain water that has entered behind the cladding • Reduces the wet time of absorptive claddings • Increased drying of the interstitial wall assembly • Mitigate reverse vapor drive for highly permeable Water Resistant Barrier / Air Barrier (WRB/AB) systems Learn the current research and field practices on vapor open (permeable), vented rain screen cladding wall assemblies and their impact to mitigate water long-term intrusion and enhance the drying capacity of the building envelope assembly for the life of the building....
This panel discussion explores building sustainable designs for energy efficiency, water efficiency and stormwater management starting from the roof. With urban heat island effect compounding the global warming from climate change, we are in urgent need of understanding how the roof can be very effective in delivering sustainable, high performance buildings while incorporating stormwater Best Management Practices (BMPs). Smart material choices and quality and environmental performance certifications are part of assuring performance meets design intent. In addition, job site pain points and project insights for maximizing building design performance will be shared....
View the DuPont Performance Building Solutions Course Library
Although known for being a strong and versatile building material, there are a number of factors that affect the sustainability of concrete, and a variety of measures that can be taken to increase its durability and extend its service life, thus protecting the health, safety, and welfare of the users. This course discusses the environmental impact of concrete and some of the main causes of concrete deterioration, and examines how crystalline waterproofing technology can be employed to increase the durability and sustainability of concrete....
Having an up to date specification starts with understanding what is in the building code. This course reviews the requirements that steel framing must meet to be compliant to IBC 2021. It covers the standards for manufacturing tolerances, minimum thickness and protective coatings. Participants will also review fire-rated partitions...
Maximizing Envelope Performance with IMP-Integrated Components explores an advanced insulated metal composite panel building envelope system, components that have been engineered to integrate with the system - including windows, daylighting panels, sunshades, and louvers - and how the IMP system and integrated components combine to create a high-performance building envelope....
As interest in cross laminated timber buildings grows, the market for building enclosure products, as a whole, has yet to fully provide the water-resistant barriers, vapor barriers, and air barriers to optimally support the unique characteristics of wood. Furthermore, there are few building enclosure design guides specific to detailing wood-framed walls, floors and roofs. This comprehensive course fills the gap, providing detailed information on mass timber, building enclosure issues, the vapor-permeable technology available to address wood’s unique moisture characteristics, and a how-to guide on detailing the walls, floors and roof of the enclosure....
Understanding how insulated metal panels comply with fire safety regulations under the code are critical to their proper use in creating highly energy efficient and sustainable buildings. This course takes a relatively complex subject and addresses the most important fire safety related aspects to allow building designers to make an informed decision on the use of these popular cladding systems. We will review how these products have been addressed in the development of the International Building Code, including their applications in both combustible and noncombustible structures as well as single and multi-story construction. The program will conclude with a look at the various third-party product listings, evaluation reports, and engineering judgements used to evidence compliance with the International Building Code....
Kalwall’s diffuse, full-spectrum natural daylighting delivers soft, serene natural light to places of worship, creating a spiritual setting that both soothes and inspires. Over the years, many designers have utilized Kalwall to great effect, often simulating stained glass windows with our colored inserts. Learn how you can incorporate Kalwall into your next church or religious space....
From performing arts centers and music schools to museums and Native American centers, Kalwall is proud to be a part of cultural facilities around the world. Culture is at the heart of our communities, and it’s our job to shine a light on the things that matter most. With natural, diffuse daylight improving visual acuity and boosting mood, there’s no better way to help people embrace culture....
Ensuring a building’s roof is waterproof, on top of being structurally sound, is critical to the success of any building project. This course examines rapid curing, polymeric liquid-applied waterproofing membranes for roofing and other demanding applications. Discussions include the history of PMMA, PMMA system components and characteristics, the installation process, and the versatility of PMMA products....
Discover the art and science of snow control on roofs and its effects. Examine the liabilities of improper or no snow retention. Learn how to properly engineer snow guards, minimize hazards and increase safety. Reveal critical considerations when choosing a snow guard system. Review specification techniques to limit liability....
In designing successful interior building spaces that positively impact their occupants, it is critical to have knowledge of the principles of acoustics and noise control and link them to design methodology. This course explores these principles, with a special emphasis on common building types where acoustics and noise control are often required and noise can have detrimental effects on users, such as athletic facilities and performance spaces....
View the Catalyst Acoustics Group Course Library
This course is part of one or more "Course Collections". Click here to view the details.
This course title emphasizes the focus on prioritizing safety in horizontal access design, specifically for roof hatches and floor doors. It highlights the importance of creating secure access solutions while also incorporating daylight solutions through skylights. Attendees can expect to learn about best practices, safety considerations, and design strategies for designing safe horizontal access points. Additionally, the course will provide insights into effectively specifying skylights to optimize daylight penetration, enhancing the overall illumination in areas accessed through roof hatches and floor doors....
One of the most complex and least understood areas where fire can propagate is at the perimeter of a multi-story building. Not only can fire spread from floor-to-floor via the edge-of-slab/curtain wall intersections but also along the exterior building enclosure where untested, combustible components are often installed. This program outlines best design practices for providing fire protection for building occupants per ASTM E2307 and E2874....
Some types of roofing systems can provide you with a roofing option that’s good for the environment and your wallet. Roofing systems don’t have to be disposable. By maximizing system longevity and recycling at the end of its useful life, roofing systems no longer have to be looked at as another thing to add to a landfill....
View the DuPont Performance Building Solutions Course Library
Join us for our webinar series with a focus on Sports + Recreation projects. There are many reasons that Kalwall is such a natural fit for coaches, athletes, trainers and fans alike. Providing glare-free, full-spectrum light is ideal for videography, mental focus and visual acuity. Learn more about how Kalwall can help you build a facility fit for champions....
Fundamentally, a building envelope functions as an environmental separator, and has specific hygrothermal control requirements. This course examines how insulated metal panels (IMPs) create the perfect envelope solution, incorporating the same control layers as site built wall systems. Discussions include: building envelope design; perfect/universal walls; and the use of IMPs to provide the building envelope’s exterior finish, and the air, vapor, water, and thermal barriers....
Retrofitting and replacing roofing systems are essential aspects of the construction industry and offer opportunities to reduce a building's energy consumption. Sustainable retrofitting of roofs with durable, energy-efficient materials helps reduce waste and conserve resources while promoting eco-friendly building practices. This course gives an overview of expanded polystyrene (EPS) insulation and innovative roofing systems that are designed to enhance building efficiency....
Moisture related flooring failures cost the flooring industry and associated stakeholders billions of dollars annually. Understanding the issues provides a path for solutions related to floor covering choices, mitigation products, and industry standards. This course identifies the issues, outcomes, industry standards, and best solutions available for design professionals....
Modular metal panel (MMP) wall systems allow for an array of different exterior and interior building designs due to their wide range of panel sizes, planes, and layout configurations. This course covers the attributes of MMPs, including the available substrates, their fabrication and ease of installation, and their ability to deliver a simple, constructible concealed-fastener rainscreen system....
The construction industry has seen a substantial increase in moisture-related issues in exterior walls. This presentation will discuss how a rainscreen wall system prevents moisture build-up within walls by providing a means for drainage and ventilation. The presentation provides an overview of rainscreen principles and explains how to incorporate a rainscreen system in a variety of applications including stucco, manufactured stone, siding, and masonry cavity walls. This course will explore the critical role of rainscreen systems and proper ventilation in building construction. These elements not only protect against water damage but also contribute to a healthier, more energy-efficient living environment. Learn how integrating these features can extend the lifespan of your walls, improve indoor air quality, and ultimately save you money in the long run....
From pitched to low slope roofing a myriad of designs are possible. Conventional roofing with the waterproofing membrane located weather-side and Protected Membrane roofing with the waterproofing membrane located at the deck can be used on buildings of various end-use, be low or high albedo surfaced (solar gain). Add to this vegetative roof assemblies (green roofs), roofs with solar arrays, blue roofs (stormwater management), - and no two roofs are alike. Join us to review the modern roof taxonomies and associated benefits and drawbacks, learn about latest options in roof construction, and reflect on performance differences....
View the DuPont Performance Building Solutions Course Library
Undesirable acoustics in educational spaces adversely affect the learning and teaching processes. The impact on students’ academic achievement, social adaptation, and mental health can be profound and long lasting. This course examines the impact of different sound problems and presents solutions that create synergy between the architecture and the classroom environment to optimize student learning and engagement and teacher retention....
