Gain an overall understanding of how wind and wind codes affect overhead doors and how these codes help to ensure the health, safety, & welfare of building occupants....
This course provides an introduction to thermal bridging, energy code requirements, and the use of thermal break solutions designed to improve energy efficiency in the building envelope....
This presentation aims to aid architects, engineers, and specification writers in choosing anchoring systems to comply with the 2022 edition of The Masonry Society’s (TMS) TMS 402 Building Code Requirements for Masonry Structures and the International Building Code® (IBC®)....
Having an up to date specification starts with understanding what is in the building code. This course reviews the requirements that steel framing must meet to be compliant to IBC 2021. It covers the standards for manufacturing tolerances, minimum thickness and protective coatings. Participants will also review fire-rated partitions...
This comprehensive presentation is designed for architects, engineers, and building specifiers, providing in-depth insights into the effective specification and use of skylights to enhance energy efficiency, natural lighting, and indoor comfort across different climate zones. The session will cover the fundamental principles of skylight design, focusing on key considerations such as light transmittance, Solar Heat Gain Coefficient (SHGC), and U-Factor, tailored to the specific requirements of Climate Zones 1-2, 3-4, and 5+. Attendees will learn how to balance daylighting with thermal performance, ensuring compliance with both the International Energy Conservation Code (IECC) and ASHRAE 90.1 standards. Practical examples and case studies will illustrate the benefits of using advanced glazing technologies and proper skylight placement to achieve sustainable and comfortable indoor environments. By the end of this presentation, participants will have a thorough understanding of how to specify skylights that meet the stringent energy performance criteria, improve occupant well-being, and contribute to the overall sustainability of residential and commercial buildings....
Wind forces always influence building design and detailing. This course focuses on one particular force, wind uplift, and its influence on roof paving system design and selection. It examines how wind loads and building configuration affect the design of roof paving systems; the codes, regulations, and calculation approaches that inform and control such designs; and the various options designers can use to design safe, appealing outdoor roof paving systems that will withstand even the strongest winds....
Expansion or modification of electrical cabling is rarely considered yet occurs during the lifetime of most buildings. Expansion of in-wall cabling requires additional work, trades, and possibly electrical service interruption, but cable tray facilitates removal and addition of cabling. This course reviews two types of cable tray—ladder tray and wire mesh tray—their components, characteristics, and applications and code-related installation information....
View the Legrand Course Library
This course is part of one or more "Course Collections". Click here to view the details.
This course explores design choices to meet energy code and thermal insulation selection strategies to maximize long term building performance. Factors influencing the performance of an insulation in its application include production, R-values, moisture, temperature, aging, and quality of installation will be discussed....
View the DuPont Performance Building Solutions Course Library
Insulated metal panels (IMPs) are lightweight composite exterior wall and roof panels with superior insulating properties. Commercial and industrial buildings benefit from their energy efficient insulation, lightweight construction, durability, and cost-effective, timely installation. This course discusses IMPs in terms of their design options, appropriate support structure, installation, function, code compliance, and warranties....
This course reviews the evolution of accessible restrooms and the recent, sudden prominence of universal (or adult) changing tables. We’ll examine how new changes to both the International Building Code® and statewide legislation affect public restroom design, and the profound impact universal changing tables can have on the lives of people with disabilities and their caregivers....
This presentation focuses on wind design requirements for commercial low-slope roofing. The presentation covers building code history, ASCE 7, future tornado wind design requirements and agency approvals for wind uplift resistance for low-slope roofing....
Exterior trim plays a crucial role in both the function and appearance of a building, which in turn impacts occupant safety and well-being. This course provides an overview of exterior trim functions and common material options available today. Also discussed are product evaluation reports and their role in code compliance; sustainability considerations and embodied carbon; and key considerations for choosing the right trim. Finally, the course applies these concepts to several design scenarios and identifies the appropriate trim option for each....
This course explores the below-grade use of polyisocyanurate (POLYISO) insulation to meet energy code and maximize thermal performance of the building foundation. Let us help dispel the myths that have been created relative to POLYISO insulation while discussing its thermal performance, water absorption, and load capacity – the three primary characteristics for below grade insulation. In addition, we will discuss how the insulation can provide protection for the foundation waterproofing system....
View the Rmax - A Division of the Sika Corporation Course Library
Magnesium oxide (MgO) products are panelized construction products that can be used as a direct replacement for other panels, such as gypsum, plywood, and OSB. This course aims to provide insight into MgO products, equipping building professionals with the knowledge and tools to select and specify them correctly, which in turn impacts occupant safety. We will also explore their performance characteristics, features, and purported issues, as well as relevant building code provisions and the evaluation process required for product compliance. Finally, we’ll look at the types of testing data for building materials and the importance of using certified products to ensure occupants’ life safety....
View the NEXGEN Building Products Course Library
This course is part of one or more "Course Collections". Click here to view the details.
This course will discuss best practices to prevent the accumulation of wind driven rain and/or condensation behind exterior adhered masonry systems. We will review proper installation of metal lath, the importance of encapsulation and a wall system that includes a rigid drainage plane. Exterior finishes discussed will include stucco, thin brick, both man made and natural thin stone. When these materials are installed over framed walls moisture management is key to the long-term resiliency of a project. We will also review the expected changes in the 9th Edition of the Florida Building Code pertaining to thin veneer specification and installation....
The increase in building energy efficiency requirements has led to the use of exterior continuous insulation (CI) to improve the performance of the building envelope. This presentation reviews the benefits of polyiso continuous insulation and then examines in detail the NFPA 285 test standard and fire safety requirements of the 2021 International Building Code for the use of polyisocyanurate insulation in exterior walls of commercial buildings (Construction Types I–IV)....
View the PIMA - Polyisocyanurate Insulation Manufacturers Association Course Library
PIMA - Polyisocyanurate Insulation Manufacturers Association
As energy codes continue to push building envelopes to higher R-value performance, architects and designers are challenged with also managing the moisture flow within the envelope to minimize the risk of condensation and the potential for mold and corrosion. Advanced testing and analysis demonstrate how specifiers can utilize mineral wool as an exterior continuous insulation, and significantly reduce the risk of condensation and subsequent mold/corrosion damage in all climate zones....
Review the physics of building envelopes, including hygrothermal loads, control layers, climate zones and cladding functions. The importance of control layer continuity at wall, roof and slab connections is studied. We look at how IMPs perform the same functions as multi-component wall systems through the use of panels joints, sealants and an insulating core. Emphasis is placed on the concept of the Perfect/Universal Wall, and how utilizing the proper ordering of wall components can greatly simplify wall design in all climate zones. Energy codes are also touched on, including their impact on the use of Perfect/Universal Wall designs. This course reduces a relatively complex subject to a level that teaches practical concepts for the building designer....
Understanding building physics is critical to proper building envelope design. Examined here are practical concepts for the building designer, including how cladding systems perform across different climate zones and applications. Environmental control layers and hygrothermal loads are reviewed, as is the concept of perfect/universal wall design. The course focuses on how single-component insulated metal panels (IMPs) function as a perfect/universal wall, simplifying wall system design and installation....
This course offers detailed information about modern redwood timberland management approaches that contribute to the species’ long-term sustainability as a building material. The course also provides insight into how third-party certification helps the redwood industry communicate environmental stewardship. The course details how wood is created through the process of photosynthesis and how carbon is sequestered long-term in wood products, drawing a connection between sustainably sourced redwood lumber products and the ability to achieve carbon-neutral standards. Lastly, the course defines redwood grades and performance characteristics and describes how these properties achieve building code acceptance....
Cable railings are a beautifully minimalist way to meet safety requirements without obstructing the view. Learn how to assemble a commercial-grade cable railing with sophisticated fittings engineered to simplify installation, comply with building codes, and reduce overall labor costs....
The facade is one of the most significant contributors to the energy consumption and comfort parameters of any building. This course explores high-performance building envelopes and the use of advanced insulated metal panel systems featuring integrated daylighting and ventilation components that combine to provide weathertightness and maximum thermal performance....
For some applications, building codes provide for the use of fire-retardant-treated (FR) wood products as an alternative to noncombustible materials. To ensure that FR wood products are properly specified, it is important to understand how these products are made, their formulations, and the building code references that guide their use in construction. This course offers a review of FR wood products, including their manufacture, the applications and types of fire retardants that are available, and the factors that must be considered to ensure FR wood products are properly specified for code compliance....
View the Western Wood Preservers Institute Course Library
Western Wood Preservers Institute
This course is part of one or more "Course Collections". Click here to view the details.
Fire safety is an important building enclosure design factor and needs to be addressed hand-in-hand with energy code requirements. NFPA 285 is a critical consideration with modern building assemblies incorporating combustible materials in noncombustible construction. This presentation reviews the history and scope of the NFPA 285 test standard and its adoption into the International Building Code® (IBC®). The compliance criteria are outlined, and triggers and contributors under the standard are identified. The course also reviews how the selection of building components such as insulation, air-/water-resistive barriers, and claddings affects the fire performance of an assembly, and solutions and common paths for compliance are presented....
View the DuPont Performance Building Solutions Course Library
Bathing facility code compliance does not have to result in an institutional look. Assisted living and healthcare facilities, hospitality installations, universities, multifamily buildings, and large commercial projects all have unique demands, and most require barrier-free, ADA, UFAS, ANSI, California Title 24, or Massachusetts compliant bathing and showering facilities. This course provides an overview of intelligent design solutions that simultaneously address these code requirements and the aesthetic and functional demands of each situation....
View the Bestbath Course Library
This course is part of one or more "Course Collections". Click here to view the details.
