Modern roof systems and envelope assemblies (both commercial and residential) may need to deliver a wide range of benefits – from protecting against severe weather to reducing energy waste to improving occupant well-being and comfort. Each component of the building envelope has an important role to play, including the insulation layer. This presentation introduces the key benefits and attributes of polyiso roof insulation products, polyiso continuous insulation products used for above grade wall assemblies and below grade applications, and continuous insulation products used as part of residential envelope assemblies (steep slope roofs, above grade walls, and below grade foundation). Topics covered include: • Designing building and energy code-compliant roof assemblies and commercial and residential envelope assemblies. • Solving performance challenges like ponding water on roofs. • Solving performance challenges like thermal bridging and managing the threat of moisture and air intrusion in commercial and residential building envelope assemblies. • Reducing the environmental impacts of buildings with roof systems and envelope assemblies that contain polyiso insulation products....
View the PIMA - Polyisocyanurate Insulation Manufacturers Association Course Library
PIMA - Polyisocyanurate Insulation Manufacturers Association
Rainscreens are a multicomponent system offering redundancy in resisting the weather; however, continuity of each component is critical. When an insulated metal panel (IMP) is used within the system, it can function as a number of these components, simplifying installation and improving performance. This course looks at IMPs acting as barrier walls behind various rainscreen systems, with a discussion on the performance characteristics for air, water, vapor, and thermal management....
From the presenters of “Maintaining Continuous Insulation and AWBs at Transitions” comes the next detailing presentation in the series. This presentation expands on integrating insulation and air barriers using the previously described building science fundamentals but applied to some trickier details. How do you integrate continuous insulation at a foundation where the masonry veneer must rest on concrete foundation walls? How do you attach heavy, but combustible, low mass veneers? Join us to find out....
Lightweight, prefinished, and factory-fabricated insulated metal panels (IMPs) offer building owners a durable, cost-efficient, and easy-to-install roofing system that provides an air barrier, vapor barrier, and insulation all in one product. This course discusses the characteristics of IMPs and the installation process and explains why IMPs are ideally suited for pre-engineered and structural steel buildings. The role of IMPs in a building’s hygrothermal control layers and IMP code compliance are reviewed....
Pre-Cast Concrete assemblies are often the design solution to tight timelines and practical installation. With the addition of insulation and a toolkit of accessories, designers can improve efficiency, quality, and aesthetic often beyond stick-built options. How do you integrate continuous insulation into walls made from a series of panels shipped across the country? Join us to find out! Real-world case studies will be used to compare and contrast with frame construction....
With the demand for sustainable power on the rise, building owners and homeowners alike are turning to solar power as a supplemental power generator. Choosing the right platform for the solar panels is a critical step in the design process and can have a significant impact on both initial and long-term costs. This course discusses the basics of photovoltaic systems, including the components and rooftop applications. Comparisons between traditional roofing and standing seam metal roofing platforms are examined, and the benefits of a nonpenetrating clamping system are discussed....
Acoustical doors are vital in managing sound transmission in various architectural and industrial settings. This course discusses evaluating, specifying, and integrating acoustical doors into projects that demand effective noise control, speech privacy, and occupant comfort. It also examines how acoustical doors may help meet credit requirements in the LEED® v5 Building Design and Construction rating system and the WELL Building Standard™ version 2. Compliance with fire safety codes and SCIF specifications is also discussed....
View the Catalyst Acoustics Group Course Library
This course is part of one or more "Course Collections". Click here to view the details.
Acoustical design requirements are frequently based on laboratory test data. Walls constructed in a lab for testing are built under ideal conditions and with high levels of precision. These walls also do not have any of the attachments or penetrations that are ubiquitous in real-world construction. Selecting a tested wall design that meets an STC requirement is not enough to provide adequate sound isolation in the real-world. To achieve good sound isolation it is imperative that designers understand how to treat the myriad of details that can compromise a wall's performance. These include: electrical boxes, hanging cabinets, window mullions, control joints, intersections, and more. In this presentation we: discuss why a detail is important for noise control, provide the acoustical impact of poor detailing based on test data (when available), and provide acoustical best practices for the details...
No discussion about a material’s sustainability is complete unless it addresses embodied carbon, the carbon dioxide (CO₂) emissions associated with the material over its cradle-to-grave life cycle. Changes made to spray polyurethane foam (SPF) insulation formulations address the impacts of embodied carbon. This course explores the evolution and environmental impacts of SPF blowing agents, the performance benefits of SPF, physical property testing and certifications, and SPF’s potential LEED® v4 contributions. Case studies make evident the performance value of SPF....
Architectural metal panels (AMPs) provide exceptional design versatility, enhancing both the aesthetics and functionality of a building. This course explores different types of panels, their applications, finishes, key design and specification considerations, and best practices to ensure the durability and performance of the panel system. Additionally, several project examples are presented to showcase the creative applications of AMP systems....
This course explores the below-grade use of polyisocyanurate (POLYISO) insulation to meet energy code and maximize thermal performance of the building foundation. Let us help dispel the myths that have been created relative to POLYISO insulation while discussing its thermal performance, water absorption, and load capacity – the three primary characteristics for below grade insulation. In addition, we will discuss how the insulation can provide protection for the foundation waterproofing system....
View the Rmax - A Division of the Sika Corporation Course Library
Acoustical design requirements are frequently based on laboratory test data. Floor/ceiling assemblies constructed in a lab for testing are built under ideal conditions and with high levels of precision. These assemblies also do not have any of the attachments or penetrations that are ubiquitous in real-world construction. Selecting a tested floor/ceiling design that meets an STC and/or IIC requirement is not enough to provide adequate sound isolation in the real-world. To achieve good sound isolation, it is imperative that designers understand how to treat the myriad of details that can compromise a floor/ceiling assembly's performance. These include: can lights, soffits, control joints, window shades, access panels, speakers, and wall/ceiling intersections. In this presentation we: discuss why a detail is important for noise control, provide the acoustical impact of poor detailing based on test data (when available), and provide acoustical best practices for the details....
Mouldings and trim occupy a small amount of space on a home’s exterior; however, their aesthetic value outweighs their size. Cellular PVC mouldings and trim are durable; stain, rot, and insect resistant; maintenance-free; and recyclable. For properly arranged exterior mouldings and trim, architects and designers need a thorough understanding of the materials and the design rules and functions for each location. This course takes the reader through the layout and installation of exterior mouldings, particularly cellular PVC, and looks at some common mistakes and solutions....
Understanding how insulated metal panels comply with fire safety regulations under the code are critical to their proper use in creating highly energy efficient and sustainable buildings. This course takes a relatively complex subject and addresses the most important fire safety related aspects to allow building designers to make an informed decision on the use of these popular cladding systems. We will review how these products have been addressed in the development of the International Building Code, including their applications in both combustible and noncombustible structures as well as single and multi-story construction. The program will conclude with a look at the various third-party product listings, evaluation reports, and engineering judgements used to evidence compliance with the International Building Code....
Roof and floor hatches offer practical solutions for improving accessibility, safety, and functionality in residential, commercial, and industrial buildings. They must be designed and specified to provide safe access to rooftops and below-ground spaces to facilitate maintenance, inspections, equipment installations, and more. The specification considerations for roof, floor, and skylight hatches are presented here. Discussions include size considerations, material options, types of operation, safety features, loads, and thermal, fire, and acoustic performance....
An examination of the new Poly-Ash category of exterior moulding as it relates to other types of moulding, specifically around the areas of installation, maintenance, and sustainability....
Understanding building physics is critical to proper building envelope design. Examined here are practical concepts for the building designer, including how cladding systems perform across different climate zones and applications. Environmental control layers and hygrothermal loads are reviewed, as is the concept of perfect/universal wall design. The course focuses on how single-component insulated metal panels (IMPs) function as a perfect/universal wall, simplifying wall system design and installation....
From pitched to low slope roofing a myriad of designs are possible. Conventional roofing with the waterproofing membrane located weather-side and Protected Membrane roofing with the waterproofing membrane located at the deck can be used on buildings of various end-use, be low or high albedo surfaced (solar gain). Add to this vegetative roof assemblies (green roofs), roofs with solar arrays, blue roofs (stormwater management), - and no two roofs are alike. Join us to review the modern roof taxonomies and associated benefits and drawbacks, learn about latest options in roof construction, and reflect on performance differences....
View the DuPont Performance Building Solutions Course Library
This presentation will focus on the overview of various waterproofing, protection course and drainage methods that meet the standards of today’s foundation applications. Along with an overview of various code and design requirements that mandate foundation waterproofing systems and applications....
Discover the art and science behind SBS (Styrene-Butadiene-Styrene) membrane production in this comprehensive course. Investigate the key components that comprise this durable material, including SBS, Asphalt, Filler, and Reinforcement. Through hands-on learning and practical insights, participants will gain an understanding of the SBS membrane manufacturing process from start to finish....
Designing beautiful, sustainable, high-performance buildings can help your structures leave a lasting impression and positive impact. Insulating concrete forms (ICFs) accomplish that while providing innovative design possibilities for single or multistory projects. Learn about the features and advantages of building with ICFs designed as a cost-effective, energy-efficient solution that offers substantial benefits over traditional construction methods....
The materials we use have a big impact on the environment, our communities and our health. To select materials wisely, we have to know what's in them and what effects they have before, during and after their use. This course will focus on the key drivers in the market on material health and disclosure, types or reporting tools and what the differences are between them....
Good acoustic and aesthetic environments are important to the health, safety, comfort, satisfaction, productivity, and general well-being of all building users. This course outlines the benefits of and methodologies for simultaneously creating both with wall and ceiling acoustic treatments. The highly illustrated course includes detailed descriptions of the many acoustic wall and ceiling treatment options available, as well as sample installations....
View the Catalyst Acoustics Group Course Library
This course is part of one or more "Course Collections". Click here to view the details.
As the market continues to transform the way sustainable buildings are designed, single-skin metal roof and siding products are at the forefront of contributing to healthier built environments. This course breaks down the material inputs and sustainable attributes of single-skin metal roof and siding panels and includes an overview of how the panels can contribute toward earning several LEED ® for Building Design and Construction credits in v4.1....
The surface coating is the first line of defense in prepainted metal, and one of the most important elements to consider as part of a metal purchase. Selecting the right coating, finish, and paint system can affect product lifespan, energy efficiency, and aesthetic appeal. This course discusses the composition of prepainted metal, its application and performance, and examines the building and environmental factors that may influence the type of paint system specified....
