Net zero energy ready buildings are a popular topic in today's world of climate change. This course explores how energy efficiency has expanded toward exterior wall assemblies, where thermal bridging and thermally broken subframing systems are becoming the new norm....
Energy codes at all levels increasingly focus on reducing energy consumption, saving consumers money, and reducing CO2 emissions. New and updated energy codes play an essential role in the performance of buildings. This course examines the lighting requirements and provisions of ASHRAE Standard 90.1-2019 and the 2021 International Energy Conservation Code® (IECC) and focuses on plug and lighting control strategies for energy efficiency....
Polyisocyanurate (polyiso) insulation is one of North America’s most widely used, readily available, and cost-effective insulation products. While polyiso is currently most commonly known for its use on roofs and walls, this course focuses on the many benefits of using it in below-grade installations in order to meet energy codes, maximize the building foundation’s thermal performance, and extend the overall life of the structure. The course explores the requirements for three primary characteristics of any below-grade insulation—thermal performance, water absorption, and load capacity—and describes how polyiso meets or exceeds those requirements and protects the foundation waterproofing system....
View the Rmax - A Division of the Sika Corporation Course Library
This course will discuss best practices to prevent the accumulation of wind driven rain and/or condensation behind exterior adhered masonry systems. We will review proper installation of metal lath, the importance of encapsulation and a wall system that includes a rigid drainage plane. Exterior finishes discussed will include stucco, thin brick, both man made and natural thin stone. When these materials are installed over framed walls moisture management is key to the long-term resiliency of a project. We will also review the expected changes in the 9th Edition of the Florida Building Code pertaining to thin veneer specification and installation....
Insulating concrete form (ICF) products use a cost-effective and robust structural material option (reinforced concrete) to turn a building envelope into a high-performing thermal, moisture, and air enclosure with disaster resistance and built-in compliance with energy code requirements. As a result of ICF performance, building owners can complete a whole structure with ICFs and reinforced concrete, including intermediate suspended floors, rooftops, and multistory designs. This course examines the advancements in ICF technology and discusses the potential contribution of ICFs to supporting improved sustainability and resilience....
Attic ventilation is an important component in proper structural design. By encouraging airflow, attic ventilation plays a key role in maintaining structural integrity, ensuring roof component durability, providing a healthy indoor environment, and minimizing energy consumption. Additionally, proper attic ventilation hinders or prevents mold growth, reduces interior pollutants, and acts as a pivotal fire prevention tool. This course looks at how attic ventilation systems work, the benefits they provide, and the associated building codes and regulations....
The spread of smoke in mid- and high-rise building fires is recognized as a major threat to the safety of the building occupants and responding fire personnel and the effectiveness of firefighting operations. This course explains how smoke migrates in a multi-story building fire and discusses how building codes have evolved to address this danger and why they mandate smoke containment in specific areas of a structure. Product applications and assemblies designed to meet building code requirements and limit vertical smoke migration via elevator hoistways and lobbies are examined....
Cable railings are a beautifully minimalist way to meet safety requirements without obstructing the view. Learn how to assemble a commercial-grade cable railing with sophisticated fittings engineered to simplify installation, comply with building codes, and reduce overall labor costs....
This course covers how to comply with the most stringent Energy Code requirements using pre-fabricated wall panels and components featuring next generation concrete masonry unit designs....
Increased energy efficiency in both new and existing construction continues to be a large factor behind the design decisions we make and the materials we choose to integrate into our buildings. Concrete masonry construction can provide a wide range of benefits. This course illustrates how building envelopes constructed with concrete masonry create high-performance buildings that can exceed energy code requirements....
View the Concrete Masonry & Hardscapes Association (CMHA) Course Library
Sound abatement products are not just a building owner and occupant preference; minimum sound abatement ratings are required by many local building codes for multi-story residential, commercial, and multi-purpose buildings. Following an introduction to the basics of sound, this course presents a summary of the most common sound control methods, with a focus on the options available for floor underlayment....
This short version course introduces attendees to the basic materials and equipment used to create spray polyurethane foam. It will also discuss the safety aspect related to spray foam in terms of its application as well as its proper use to ensure code compliance. Lastly, it discusses the different kinds of spray foam commonly used and which material works best in different areas of a building....
Expansion or modification of electrical cabling is rarely considered yet occurs during the lifetime of most buildings. Expansion of in-wall cabling requires additional work, trades, and possibly electrical service interruption, but cable tray facilitates removal and addition of cabling. This course reviews two types of cable tray—ladder tray and wire mesh tray—their components, characteristics, and applications and code-related installation information....
View the Legrand Course Library
This course is part of one or more "Course Collections". Click here to view the details.
The planet is currently in a water scarcity crisis, which is significantly affected by toilet water usage. This course examines the current plumbing codes, standards, and regulations that address toilet water usage, the need for and benefits of going beyond current standards, and the goals of a variety of beyond-the-code voluntary standards and rating systems, such as LEED v4 BD+C and ICC 700 National Green Building Standard®. It explains the various types of low-flow and ultra-low-flow toilets, their pros and cons, and their selection criteria. It concludes with a sampling of successful cost- and water-saving installations....
View the Niagara Course Library
This course is part of one or more "Course Collections". Click here to view the details.
With limited exceptions, the International Building Code® (IBC®) requires testing and compliance with NFPA 285 for exterior wall assemblies of buildings of Types I, II, III, and IV construction containing foam plastic insulation. This course examines three methods for demonstrating that an exterior wall assembly design complies with NFPA 285, including engineering analysis. The course also discusses how and where to locate NFPA 285 information for each compliance method....
View the North American Modern Building Alliance Course Library
Manufacturers, industry groups, architects, designers, and homeowners all share an expectation of safety in the buildings we occupy and use every day. This course discusses the key chapters where important exterior wall fire provisions can be found in the International Building Code® and examines many common features of global fire incidents. The course also describes the NFPA 285 fire test and discusses the new Annex B in the 2023 edition of NFPA 285. Finally, there is a discussion of the code compliance pathways when exterior walls are required by the IBC® to be tested and comply with NFPA 285....
View the North American Modern Building Alliance Course Library
This course examines the role of access doors and panels in building design. It covers their functions, material options, and performance requirements. Topics include resistance to fire, sound, and moisture, as well as durability, code compliance, and integration with surrounding finishes. The course also presents best practices for specifying and installing access components that support safety, accessibility, and design continuity across a range of project types....
View the Best Access Doors Course Library
This course is part of one or more "Course Collections". Click here to view the details.
Having up-to-date specifications starts with understanding what is in the building code. This course reviews the requirements that cold-formed steel framing must meet to be compliant to the 2024 International Building Code. It covers the standards for manufacturing tolerances, minimum thickness and protective coatings. Participants will also review fire-rated partitions....
Birds provide billions to our economy, yet bird populations are crashing, with collisions with glass a primary cause. Whether looking through glass at habitat beyond, or flying towards reflected habitat, birds collide at flight speed with fatal results, often days later, from internal injuries. Birds collide with glass on structures of every size, from shacks to skyscrapers, in urban, suburban and rural areas. Advances in technology are increasing use of glass curtain walls and other large glass features, increasing the rate of mortality. We will describe materials that can make buildings safe for birds without sacrificing light, appearance or view clarity. In 2011, San Francisco was the first U.S. city to require bird-friendly design for some new construction. The LEED Pilot Library added a credit for reducing bird collisions the same year and that has since been added to the primary credit system. Over 20 jurisdictions at levels from state to town, have now mandated bird-friendly construction and more are pending. Notably New York City, in 2019, adopted code requiring bird-friendly design for all new construction. We review use of the LEED credit and important features of legislation across the U.S. and Canada. This class explains how to recognize and remediate hazards to birds in the built environment. We illustrate how many strategies for controlling heat and light, and even security, can also reduce bird mortality. Techniques now in use for evaluating the relative threat level to birds of different materials are described, along with typical results. Resources, like American Bird Conservancy’s searchable database of bird-friendly materials are reviewed....
Mass timber, a type of building material and structural framing style, was recently adopted by the 2021 International Building Code, and as such is a rapidly growing building trend in the United States. When it comes to building systems in mass timber structures, product decisions must be thoroughly thought out early in design, allowing for efficient design modeling and a speedy construction phase. This course provides designers an overview of the updated IBC as it relates to mass timber building, as well as the many applications and challenges designers face when it comes to providing code-compliant and aesthetically pleasing power, data/communication, and AV throughout the building space....
Cable railings are a beautifully minimalist way to meet safety requirements without obstructing the view. Learn how to assemble a commercial-grade cable railing with sophisticated fittings engineered to simplify installation, comply with building codes, and reduce overall labor costs....
View the Feeney Inc. Course Library
This course is part of one or more "Course Collections". Click here to view the details.
Insulated metal panels (IMPs) are lightweight composite exterior wall and roof panels with superior insulating properties. Commercial and industrial buildings benefit from their energy efficient insulation, lightweight construction, durability, and cost-effective, timely installation. This course discusses IMPs in terms of their design options, appropriate support structure, installation, function, code compliance, and warranties....
Modern building envelope assemblies need to deliver a wide range of benefits – from protecting against severe weather to reducing energy waste to improving occupant well-being and comfort. Each component of the envelope has an important role to play, including the insulation. This presentation introduces the key benefits and attributes of polyiso continuous insulation products used for above grade wall assemblies as well as below grade applications. Topics covered include designing building and energy code-compliant commercial envelope assemblies, solving performance challenges like thermal bridging and moisture barrier and air barrier requirements, and reducing the environmental impacts of buildings with assemblies that contain polyiso continuous insulation products....
View the PIMA - Polyisocyanurate Insulation Manufacturers Association Course Library
PIMA - Polyisocyanurate Insulation Manufacturers Association
Gain an overall understanding of how wind and wind codes affect overhead doors and how these codes help to ensure the health, safety, & welfare of building occupants....
Locating mechanical and electrical equipment on a roof is often necessary for space and efficiency in a building design. However, it can be challenging to provide a means for safe maintenance access while preserving the roof membrane and structural integrity and not interfering with other rooftop equipment. This course presents the components that comprise rooftop support systems designed to solve these challenges, as well as system design considerations and compliance with the International Building Code® (IBC®) and the International Mechanical Code® (IMC®)....
Displaying 77 - 101 of 339 results.
FIRST PREV [27-51] [52-76] [77-101] [102-126] [127-151] NEXT LAST