The perimeter roof edge is the first line of defense against wind events and costly issues. Learn about why using a proper perimeter roof edge system is critical....
Understanding how insulated metal panels comply with fire safety regulations under the code are critical to their proper use in creating highly energy efficient and sustainable buildings. This course takes a relatively complex subject and addresses the most important fire safety related aspects to allow building designers to make an informed decision on the use of these popular cladding systems. We will review how these products have been addressed in the development of the International Building Code, including their applications in both combustible and noncombustible structures as well as single and multi-story construction. The program will conclude with a look at the various third-party product listings, evaluation reports, and engineering judgements used to evidence compliance with the International Building Code....
This course will educate the AEC team on the advantages of utilizing cold-formed steel framing in the construction of mid-rise structures. It discusses reasons for using cold-formed steel framing in the structural framing of buildings, the preferred method of construction to frame buildings, as well as the advantages realized by the members of the Owner/Architect/Contractor team....
Protected Roof Membrane Assemblies and particularly Vegetative Roof Assemblies place extreme requirements on the components below the surface from waterproofing to insulation and everything in between. Each component must meet specific standards to achieve energy efficiency and durability. This course describes the high-performance attributes of PRMA components and defines the building code/performance standards and best specification practices to meet fire, wind, thermal, and moisture performance....
Waterproofing problem solving using PMMA CFA (Cold Fluid Applied) Roofing and Waterproofing Membrane Systems....
The beautiful gray patina of zinc architectural metal has graced the rooftops of buildings in Europe for hundreds of years. This course examines the sustainable characteristics of zinc as a roofing material, including its 100% recyclability, zero VOC requirement, and low embodied energy production process. The life cycle analysis of zinc is examined, as is zinc’s long-term service life. Various types of roof and wall applications are also discussed....
Discover the art and science of snow control on roofs and its effects. Examine the liabilities of improper or no snow retention. Learn how to properly engineer snow guards, minimize hazards and increase safety. Reveal critical considerations when choosing a snow guard system. Review specification techniques to limit liability....
Acoustical design requirements are frequently based on laboratory test data. Walls constructed in a lab for testing are built under ideal conditions and with high levels of precision. These walls also do not have any of the attachments or penetrations that are ubiquitous in real-world construction. Selecting a tested wall design that meets an STC requirement is not enough to provide adequate sound isolation in the real-world. To achieve good sound isolation it is imperative that designers understand how to treat the myriad of details that can compromise a wall's performance. These include: electrical boxes, hanging cabinets, window mullions, control joints, intersections, and more. In this presentation we: discuss why a detail is important for noise control, provide the acoustical impact of poor detailing based on test data (when available), and provide acoustical best practices for the details...
Architects and other design professionals have a critical role to play in reducing global greenhouse gas emissions through building design and product selection. The urgent need to reduce both operational and embodied carbon means that building designers must be familiar with transparency documents that facilitate low-carbon product selection. In this course, we review the types of carbon of concern, transparency documents that provide critical information, and tools for sourcing embodied carbon information. We also look at the contribution of insulated metal panels to both low embodied and low operational carbon buildings....
Off-site construction practices for commercial projects are growing in popularity because of their ability to combat persistent industry challenges such as weather delays, skilled labor shortages, material availability issues, and price increases. While the benefits to off-site construction are undeniable, the upfront efforts required from the project team can cause apprehension. This learning will take participants on an off-site construction journey leveraging case studies to share firsthand experiences of successful projects that have been able to turn the upfront effort into a wealth of benefits....
In basic roofing design vapor retarders and air barriers play a crucial role in reducing air leakage and enhancing roof system performance. However, their benefits extend beyond simple air sealing. This course explores the impact of new innovative technology: permeable vapor retarders and air barriers on moisture management, energy efficiency, and wind uplift resistance in low-slope roofing assemblies. Attendees will gain insights into moisture infiltration, air movement, and the risks associated with condensation buildup, material degradation, and loss of R-value in the roofing assembly. The presentation will cover strategies for proper design and placement of a permeable vapor retarder to mitigate condensation buildup and premature roof failures. Recent research findings will highlight how advanced moisture control solutions, such as permeable vapor retarders, enhance long-term roof resiliency and durability, lowering total cost of ownership....
This presentation focuses on wind design requirements for commercial low-slope roofing. The presentation covers building code history, ASCE 7, future tornado wind design requirements and agency approvals for wind uplift resistance for low-slope roofing....
Manufactured stone veneer is an inspirational design element, born from innovative technology and creative solutions. Also known as MSV, manufactured stone veneer is lightweight, non-load bearing building material used as a decorative wall covering for exterior or interior surfaces in both residential and commercial construction. Manufactured stone veneer products are cast in molds taken from carefully selected natural stone, using a process that faithfully captures even the faintest detail. The use of molds allows the stone to have a unique aesthetic and panelized systems allow for quicker installation. Manufactured stone veneer products adhere to any structurally sound surface and require a simple installation process of lath, scratch coat, mortar, and grout. Each color and texture uses a blend of Portland cement, lightweight natural aggregates, and iron oxide pigments. Even on close examination, manufactured stone looks and feels like natural stone....
A properly designed roof is a building’s primary shield, safeguarding everything beneath it. Presented are metal roofing substrates, their advantages and drawbacks, and material compatibility. Also discussed are metal roofing configurations, finishes and coatings, and roofing system components. Design considerations, including expansion and contraction, fasteners, climate/regional weather, fire resistance, cool roof designs, and structural weight, are reviewed....
Within building spaces, noise can be reduced by using materials or assemblies that isolate sound or mitigate its transmission. To do this, it is important to understand how sound moves through building materials and partitions and the impact of sound mitigation products. In this course, we look at the basics of sound as well as techniques and products to prevent sound transmission....
View the PAC International, Inc. Course Library
This course is part of one or more "Course Collections". Click here to view the details.
There are 3 modes of heat transfer: conductive, convective, & radiant. Radiant Heat Gain (RHG) accounts for significant increases in energy use and impacts building occupant comfort. The use of Radiant Heat Barriers in specific project types can reduce RHG by up to 80% or more improving building performance in both categories. This presentation will provide insight into the science and the solutions....
Unwanted sound can become more than a mere annoyance. Excess noise has been found to increase stress and distraction, reduce learning and productivity, and even lead to hypertension and permanent hearing loss. This course presents an overview of how sound is described and measured and discusses the many industrial and architectural products available to control noise in virtually any environment....
High rise fires are not new to us. In fact, we have seen an increase in fire incidents in Asia, Europe, and the Middle East in the last 5-10 years that have amplified awareness on fire safety performance of taller structures. High rise buildings present a greater risk with an increased number of occupants that have a limited means of escape in the event of a fire. That is why the time element for containing a fire is so critical. Also, as we have seen in actual fires, vertical fire spread at the exterior façade can rapidly overwhelm fire fighters means of interceding the fire from ground level. As the fire accelerates and upward spread progresses, it often reaches a height beyond the reach of fire services water streams. That is why containing a fire and preventing if from spreading vertically is so critical for both occupant and first responder safety....
Identify key fenestration design criteria that will fortify buildings against ballistic, blast, forced entry, and environmental threats....
View the USBP - United States Bullet Proofing, Inc. Course Library
This course focuses on design considerations when using insulated metal roof panels. Panel characteristics, paint finishes and roof geometry options are reviewed. Support structure requirements (ex: purlins, joists, decking) including steel alignment/tolerances, panel spans and roof diaphragm considerations are studied. Functional aspects including environmental control layers (air, vapor, water and thermal) are examined. A full color animated video provides guidance on the step by step process of how IMP roofs are installed. Code compliance including air/water, thermal, fire safety and wind uplift is addressed. The program concludes with product and installation warranties, including paint, corrosion and weather tightness....
In the wake of the green movement, combined with rising energy costs, building sustainability has become an important topic. This course examines how foil-faced polyisocyanurate (polyiso) continuous insulation can function as a multiple control layer, providing a building with an air and water-resistive barrier and a thermal control layer. Additionally, this course reviews building codes and standards for meeting the continuous insulation requirements in steel stud building envelope designs, the benefits of using polyiso insulation in wall assemblies, and how polyiso insulation meets NFPA 285 requirements....
View the Rmax - A Division of the Sika Corporation Course Library
This course explores the role of motorized pergolas in shaping contemporary outdoor spaces that balance energy efficiency, occupant comfort, and architectural design. Participants will learn how these systems support sustainable performance goals, discover key considerations for successful integration, and review best practices for specifying louvered roof solutions in both residential and commercial projects....
Roof top paver systems have become an integral part of commercial roofing that not only improves the energy efficiency but also increases the life expectancy. Roof top pavers provide a durable surface protecting the roofing system from thermal shock, UV degradation and impact. In addition to these benefits, roof top pavers also add the ability to increase the useable square footage of a structure by providing a durable pedestrian surface on roof decks....
This course covers several aspects of the Tesla Ecosystem, Tesla Solar Roof (renewable energy generation), Tesla Powerwall (energy storage & back-up power), and Tesla Wall Connector (electric vehicle charging)....
Ensuring a building’s roof is waterproof, on top of being structurally sound, is critical to the success of any building project. This course examines rapid curing, polymeric liquid-applied waterproofing membranes for roofing and other demanding applications. Discussions include the history of PMMA, PMMA system components and characteristics, the installation process, and the versatility of PMMA products....
Displaying 92 - 116 of 524 results.
FIRST PREV [42-66] [67-91] [92-116] [117-141] [142-166] NEXT LAST