Modern building envelope assemblies need to deliver a wide range of benefits – from protecting against severe weather to reducing energy waste to improving occupant well-being and comfort. Each component of the envelope has an important role to play, including the insulation. This presentation introduces the key benefits and attributes of polyiso continuous insulation products used for above grade wall assemblies as well as below grade applications. Topics covered include designing building and energy code-compliant commercial envelope assemblies, solving performance challenges like thermal bridging and moisture barrier and air barrier requirements, and reducing the environmental impacts of buildings with assemblies that contain polyiso continuous insulation products....
View the PIMA - Polyisocyanurate Insulation Manufacturers Association Course Library
PIMA - Polyisocyanurate Insulation Manufacturers Association
The use of sustainable materials and products during building design will become the standard within the construction industry, and environmental product declarations (EPDs) and Health Product Declarations (HPDs) help architects and owners make informed decisions for their projects. Insulated metal panels— a prime example of a sustainable product—are one of the most cost-effective solutions to reduce energy and greenhouse gases....
Modular metal panel (MMP) wall systems allow for an array of different exterior and interior building designs due to their wide range of panel sizes, planes, and layout configurations. This course covers the attributes of MMPs, including the available substrates, their fabrication and ease of installation, and their ability to deliver a simple, constructible concealed-fastener rainscreen system....
The building envelope must withstand the effects of long-term exposure to the elements. This course explores rainscreen wall design and the control of hygrothermal loads. The traditional multicomponent backup wall assembly is compared with the single-component, insulated metal composite backup wall system, outlining key differences in design and construction and their overall effect on installation and performance....
It is an expectation that today’s buildings have to be more than just aesthetically pleasing: they have to provide measurable environmental benefits. This course outlines how insulated concrete forms (ICFs) help meet sustainable design objectives and examines the advantages that ICFs and ICF technology have over conventional construction materials for building envelopes in all building types....
An examination of the new Poly-Ash category of exterior moulding as it relates to other types of moulding, specifically around the areas of installation, maintenance, and sustainability....
Today, architects and designers need to give special consideration to building acoustics when developing plans for new and newly renovated construction projects. Excessive noise in any environment is considered a serious problem that can negatively impact occupant comfort, leading to learning difficulties, sleep deprivation, delayed recovery from illness, and lack of privacy. Sound basics are discussed in this course, and STC, IIC, and sound attenuation (reduction) techniques are explained. Various case studies are examined to develop further understanding of the performance of common sound abatement assemblies that are essential for occupant well-being and comfort....
View the Blue Ridge Fiberboard, Inc. Course Library
This course is part of one or more "Course Collections". Click here to view the details.
This course offers a comprehensive guide to the sustainability of cold-formed steel framing (CFSF). By understanding the nuances of embodied carbon, sustainable steel production, and specification strategies, professionals can leverage CFSF's environmental benefits for a competitive edge and contribute to a healthier planet. Embodied carbon, a significant contributor to global emissions, is a growing concern in the construction industry. This course delves into its complexities, explores the role of Electric Arc Furnace (EAF) mills in producing low embodied carbon steel, and examines the importance of Environmental Product Declarations (EPDs) in verifying the sustainability of steel products. The course also provides practical strategies for reducing embodied carbon in CFSF construction. Participants will learn how to specify LEC steel and optimize their designs to minimize material usage without compromising on strength, thus achieving significant carbon reductions and contributing to a more sustainable built environment....
Good acoustic environments are important to the general well-being of all building users. This course outlines the benefits of creating them with wall and ceiling acoustic treatments. It includes many acoustic wall and ceiling treatment options and sample installations....
At their root, metal roofs and walls made from steel, copper, zinc, or aluminum have a lower environmental impact because of their ability to be recycled and reused. This course focuses on the green aspects of standing seam metal roofs, and in particular, their cool roof characteristics. Also addressed are the implications of heat islands, what constitutes construction of cool roofs/walls and how they work, some rules of thumb for understanding cool metal roofing, roof slope impacts on performance, and codes, ratings, and standards that apply to designing cool roofs/walls....
This presentation will review the basics of spray polyurethane foam chemistry, application, safety, code compliance, and building performance. It discusses safety requirements during the foam application, how spray foam can contribute to improved indoor air quality by reducing air leakage, how spray foam creates a more comfortable environment, and improves a buildings energy efficiency leading to reduced energy consumption and lowering a buildings impact on the environment....
Concrete is a very versatile and fundamental building material; however, because it is porous and wicks water through its matrix, concrete has water-related design challenges. This program examines the sustainable benefits of integral concrete waterproofing and analyzes traditional waterproofing methods as compared to integral methods in terms of performance, durability, risk, cost, and construction timeline....
Objectives of this course will be to have the participants leave with the ability to understand the health, safety, productivity, protection and aesthetic benefits of Natural daylighting in occupied spaces. The benefits to the occupants of a space with diffused sunlight (no glare) instead of direct sunlight (glare). Understanding Natural Daylight improves occupant’s attendance productivity and health. Also the benefits of designing with low solar heat gain to lower the energy costs of cooling and high insulation properties benefiting the efficiency of heating of the building. There will also be explanation about providing safety of occupants egressing a building during a fire. Attendees will also learn about safety of providing a daylighting material, which can meet OSHA fall through, windborne debris, blast resistance and explosion venting protection. *This course is presented on behalf of Kalwall’s strategic partner Structures Unlimited, Inc....
Equipment vibration that becomes structure borne can break out directly below or as is often the case far from the source. This presentation will cover the different types of isolation needed under machinal systems. Selection criteria of different isolation media will be offered for chillers, boilers, cooling towers. As important as the proper restraint of isolated equipment; the design and types of seismic and wind restraints will be presented....
This course explains the design of adhered masonry wall systems typical of today’s best practices. It utilizes familiar masonry cavity wall design to show why proper ventilation and drainage typical in this wall type must also be used in adhered masonry veneer wall design, and explores the design differences and similarities between masonry cavity wall systems and adhered masonry veneer systems. It shows the results of improper wall design, common errors in adhered masonry installation techniques and product selection, and the correct techniques and products necessary for constructing sustainable, energy-efficient adhered masonry veneer walls that will remain free of water damage for the life of the building....
This course focuses on design considerations when using insulated metal roof panels. Panel characteristics, paint finishes and roof geometry options are reviewed. Support structure requirements (ex: purlins, joists, decking) including steel alignment/tolerances, panel spans and roof diaphragm considerations are studied. Functional aspects including environmental control layers (air, vapor, water and thermal) are examined. A full color animated video provides guidance on the step by step process of how IMP roofs are installed. Code compliance including air/water, thermal, fire safety and wind uplift is addressed. The program concludes with product and installation warranties, including paint, corrosion and weather tightness....
This course aims to help architects, developers, colorists, and other specifiers understand which current popular exterior colors to continue using, which new colors to begin introducing, and what combinations will ensure successful palettes. The major design shifts in current U.S. regions as well as the cultural and consumer influences behind color trends will be referenced for the purpose of enhancing the knowledge course participants have regarding the color trends for the coming years....
Although known for being a strong and versatile building material, there are a number of factors that affect the sustainability of concrete, and a variety of measures that can be taken to increase its durability and extend its service life, thus protecting the health, safety, and welfare of the users. This course discusses the environmental impact of concrete and some of the main causes of concrete deterioration, and examines how crystalline waterproofing technology can be employed to increase the durability and sustainability of concrete....
Acoustical doors are vital in managing sound transmission in various architectural and industrial settings. This course discusses evaluating, specifying, and integrating acoustical doors into projects that demand effective noise control, speech privacy, and occupant comfort. It also examines how acoustical doors may help meet credit requirements in the LEED® v5 Building Design and Construction rating system and the WELL Building Standard™ version 2. Compliance with fire safety codes and SCIF specifications is also discussed....
The beaches and proximity to the Atlantic Ocean are some of the advantages of living in Florida. However, the extreme wind forces from hurricanes can easily damage even the strongest buildings and cause billions of dollars in property loss. As a result, certain areas of Florida―Miami-Dade and Broward Counties—have been designated High Velocity Hurricane Zones. The building products used in these zones must be laboratory tested to meet extreme wind and pressure performance standards. This course explains why a metal roof system designed to minimize the damage from hurricanes is important....
Green roof systems are designed on various roofing membranes and come with many different components depending on the many factors including the region, regulation, application, roof design to name a few. This presentation will review these assemblies and the value of options. Address key elements of green roof design, such as drainage, water storage, integration with membrane, and other considerations along with common problems to avoid. Finally, a discussion on construction sequencing and planning as well as solar integration to help the specifier better understand the technology around this segment of the building envelope to ensure greater success....
When daylighting a space, there are endless ways to go about it. With the power of daylight simulation, you can make informed decisions about material selections, placement and opening sizes, as well as building geometries. Modeling allows you to compare multiple designs to see how they will perform, while verifying light levels, potential glare and code compliance. Learn how we can help....
Insulated metal panels (IMPs) are known for their superior heat loss control, moisture and air resistance, and striking aesthetic capabilities. This course highlights how these attributes can be integrated to create beautiful, healthy, and safe buildings. It explains how IMPs achieve air, water, vapor, and thermal control via an advanced and cost-effective single-component system that accelerates construction time and offers design flexibility. The course includes essential design details and case studies that showcase the functional and aesthetic capabilities of IMPs. ...
To review the basics of sound, sound movement, and sound measurement to detail the comprehensive range of applications available to the designer to block unwanted noises, control the acoustics in large venues, and provide complete privacy where it is needed, and to discover how to improve the aesthetic appeal of each space as a result....
This course provides an overview of impacts from natural disasters and identifies solutions for building back better. It discusses the use of closed-cell polyurethane foams as well as other performance materials for disaster durable construction applications, including responding to flood and wind events using approved methods and materials....
Displaying 96 - 120 of 523 results.
FIRST PREV [46-70] [71-95] [96-120] [121-145] [146-170] NEXT LAST