Incorporating the Forgotten Thermal Benefits of Brick ( ~ 1 hour, 15 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s624574/www.aecdaily.com/course/1025181

While frequently chosen for aesthetics and durability, clay brick is not often considered when energy efficiency is a primary concern, even though it historically played a significant role in occupant comfort before the widespread use of HVAC systems. This course discusses the basics of heat transfer, relevant energy code provisions for walls, and how current research by the National Brick Research Center demonstrates the role that brick veneer can play in meeting or exceeding energy requirements in modern wall assemblies.

Thermal Spacers for Code Compliance and Improved Energy Efficiency in Metal Buildings ( ~ 1 hour, 30 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s680223/www.aecdaily.com/course/901794

The key to an energy-efficient metal building is the implementation of a continuous insulation system that virtually eliminates thermal bridging and prevents condensation. This course discusses how using thermal spacer blocks and metal building insulation in the building envelope increases energy performance, protects against condensation, and meets stringent energy code requirements.

Architectural Applications of Exterior Mouldings and Trim Featuring Cellular PVC ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s12394/www.aecdaily.com/course/1073644

Mouldings and trim occupy a small amount of space on a home’s exterior; however, their aesthetic value outweighs their size. Cellular PVC mouldings and trim are durable; stain, rot, and insect resistant; maintenance-free; and recyclable. For properly arranged exterior mouldings and trim, architects and designers need a thorough understanding of the materials and the design rules and functions for each location. This course takes the reader through the layout and installation of exterior mouldings, particularly cellular PVC, and looks at some common mistakes and solutions.

High-Performance PVF Wallcoverings ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s1202729/www.aecdaily.com/course/1215756

Polyvinyl fluoride (PVF) wallcoverings are used in commercial interiors for their durability and long‑term performance in demanding environments. This course examines how PVF functions in high‑traffic settings, including hospitality, healthcare, retail, restaurants, and multifamily applications, where surface resilience is a key consideration. The course also evaluates wallcoverings designed to resist wear and microbial growth, supporting hygienic conditions and consistent design performance in demanding applications, and possible contributions toward LEED® v5 Building Design and Construction and Interior Design and Construction rating systems and the WELL Building Standard™ v2.

Thermally Modified Wood: Durability, Sustainability, and Current Trends ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s743103/www.aecdaily.com/course/1144413

The thermal and dual modification of wood are processes used to improve wood’s profile in terms of durability, dimensional stability, overall performance, and inherent resilience and sustainability. The resulting products can be utilized in many building applications, from decking and siding to pergolas and nonstructural beams, as well as paneling, soffits, and interior trim applications. This course explores the science behind the thermal and dual modification of wood. Examples of modified wood and case studies are also reviewed.  

Utilizing EPD Output to Inform Sustainable Site Furniture Selection ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s20642/www.aecdaily.com/course/1095851

Third-party environmental product declarations (EPDs), using a life-cycle analysis (LCA) approach, provide a comprehensive analysis and quantification of a product’s sustainability. This course examines how EPDs can inform sustainable site furniture selection and how the use of sustainable site furniture can contribute to meeting various credit requirements of LEED® v4.1 Building Design and Construction, Sustainable SITES Initiative® v2, and the WELL Building Standard™ version 2.

Designing Sliding Cantilevered Gates ( ~ 1 hour, 15 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s951064/www.aecdaily.com/course/968151

Personal and corporate security is a steadily increasing issue of concern, and more homes and businesses are installing gates to control who can enter or leave. Sliding cantilevered gates, with their wide range of design and operating options, are increasingly popular for these installations. This course outlines their advantages; the many ways they can be designed, built, and operated; and those aspects that make them safe, aesthetically appealing, and reliable. The course concludes with a series of illustrated sample installations.

IMPs, EPDs, and HPDs: Sustainable Performance ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s18795/www.aecdaily.com/course/787742

The use of sustainable materials and products during building design will become the standard within the construction industry, and environmental product declarations (EPDs) and Health Product Declarations (HPDs) help architects and owners make informed decisions for their projects. Insulated metal panels— a prime example of a sustainable product—are one of the most cost-effective solutions to reduce energy and greenhouse gases.

Safety, Security, and Simplifying Access: Integrated Overhead and Access Control Solutions ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s14153/www.aecdaily.com/course/1191403

Modern commercial, industrial, and multifamily projects demand seamless integration between site access points and building systems. This course reviews how innovative proprietary systems can be adopted to create a comprehensive, safe, secure, and easy-to-use control system, from gate operators and barrier arms to interior keypads and overhead doors. Also discussed is how the technology platform connects the necessary hardware and software in a unified, scalable solution that enhances security and access control and simplifies access management across various building areas. Lastly, some real-world examples are presented to highlight these integrated solutions, showcasing the value of specifying compatible system components from a single source versus fragmented system parts.

Exterior Siding Options: Introducing Poly-Ash Siding ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s12394/www.aecdaily.com/course/1228901

There are many choices for exterior siding—which one is best for your project? The right choice depends on the aesthetic and performance characteristics of the product, combined with your client’s needs and budget. This course compares and discusses the aesthetics, durability, installation requirements, and environmental sustainability of common siding materials, plus those of a new innovation: poly-ash siding.

Optimizing Energy Efficiency and Thermal Comfort with Radiant Heating and Cooling ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s1078698/www.aecdaily.com/course/1097505

Energy conservation and occupant well-being, comfort, and productivity are issues of increasing concern in building design. This course illustrates how radiant heating and cooling systems address these issues positively and efficiently. It encompasses the various types of systems available and how they can contribute to credit requirements in the LEED® v4.1 Building Design and Construction rating system and the WELL Building Standard™ version 2. System workings, design, aesthetic considerations, advantages, testing and measuring protocols, and installation procedures are reviewed, and the course concludes with several installation examples.

Sustainable Building Envelope Performance with Self-Sealing Fasteners & Anchors ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s1075056/www.aecdaily.com/course/1110425

Sustainable building envelopes demand high performance from and proper installation of continuous insulation and air, water, and vapor control layers. What happens when thousands of holes are made in these materials as they are installed with blind fasteners, one layer on top of another by different subcontractors? Sequencing issues can generally not be avoided; instead, this course focuses on self-sealing fasteners as a solution to avoid damage and thermal bridging in insulation and control layers. Various fasteners and anchors are described, and recommendations are presented for how to specify and what testing data to look for.

Electric Infrared Heating Systems: Creating Long-Term Sustainability ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s729880/www.aecdaily.com/course/1072597

Infrared patio heaters sustainably increase safety and comfort in outdoor entertaining areas. There are many variables in creating ambient warmth, and the effectiveness and cost of heating an outdoor space depend on the design of the selected heating option. This course looks at the available outdoor heating options and their sustainability profiles, focusing on the types, color choices, mounting methods, and control options of electric infrared heaters. It includes a review of the steps required to select the best solution.

Metal Roofing Fundamentals ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s12394/www.aecdaily.com/course/1212846

A properly designed roof is a building’s primary shield, safeguarding everything beneath it. Presented are metal roofing substrates, their advantages and drawbacks, and material compatibility. Also discussed are metal roofing configurations, finishes and coatings, and roofing system components. Design considerations, including expansion and contraction, fasteners, climate/regional weather, fire resistance, cool roof designs, and structural weight, are reviewed.

Bar and Plank Grating: Profiles and Specification Considerations ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s9559/www.aecdaily.com/course/846756

Bar and Plank Gratings are used for a wide range of applications. With the array of Grating products that are available on the market, the proper selection of a suitable solution requires an understanding of the specification considerations. This course provides a review of these considerations along with a discussion of the applications and terminology relating to Bar and Plank Grating products.

Advantages of Vacuum Insulation Panels (VIPs) for Building Thermal Insulation ( ~ 1 hour, 15 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s806330/www.aecdaily.com/course/827398

Vacuum insulation panels (VIPs) offer higher thermal resistance per unit thickness than traditional insulation materials. This means a building envelope can meet the effective R-values for enclosures required by the energy codes without having to increase the thickness of the walls, roof, or floors. This course discusses how VIPs work, why they are effective, and the impact the properties of the materials used to construct a VIP can have on its performance. VIP installations and the latest developments in VIP technology are reviewed to illustrate the advantages of using VIPs as thermal insulation in the design of energy-efficient buildings.

Engineered Wood Flooring: Construction, Performance, and Longevity ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s1202917/www.aecdaily.com/course/1220973

This course explores the design, performance, and sustainability of engineered wood flooring for contemporary building projects. Learners will examine material composition, finishing methods, and installation considerations that directly impact durability, indoor environmental quality, and long‑term resilience. Emphasis is placed on responsible sourcing, low‑VOC systems, and how flooring choices support occupant safety and comfort. The course examines how engineered wood flooring can support LEED® v5 Building Design and Construction and Interior Design and Construction rating systems and the WELL Building Standard™ v2 through strategies that enhance indoor air quality and material transparency.

Fast, Scalable, Economical: The Benefits of Building with an Innovative Cold-Formed Steel (CFS) Framing System ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s1169038/www.aecdaily.com/course/1185741

Extreme weather events of all sorts are becoming increasingly frequent and ferocious. Wood stick-framed structures struggle to withstand them. As climate behavior shifts and worsens, building damage and destruction increase, building codes evolve, and insurance premiums skyrocket or simply become unavailable for certain building types in some locations. Architects must now utilize stronger, more resilient, noncombustible building approaches to address this situation. In addition, mounting pressures related to labor shortages, rising material costs, stringent building codes, and environmental volatility are pushing architects, developers, and engineers to reimagine their approaches to structural design and material selection. This course explores how an innovative, scalable, and economical cold-formed steel column and composite beam framing system can and does address these issues to create faster and deliver stronger, more cost-effective, and sustainable projects. This well-proven, code...

Sectional Door Systems & the Importance of Thermal Performance ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s10851/www.aecdaily.com/course/1141237

Often the largest access point in a building, sectional door systems play a significant role in controlling energy costs and supporting sustainable design in residential and commercial buildings. This course explores the specification considerations and the different types of sectional garage doors, as well as their role in enhancing the thermal performance of homes and commercial buildings.

Acoustic Door Assemblies and Their Role in Sound Control ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s1152/www.aecdaily.com/course/959390

Sound control is a critical element in a building’s design. We all think of the walls, ceiling, and floor when discussing sound attenuation, but without the proper acoustic door, the sound-control goals in an acoustic plan may not be met. This course reviews healthy sound levels and how to test and identify target STC ratings. Also discussed are the elements of acoustic door assemblies and how they address fire ratings and ADA compliance, contribute to LEED® certification and green building, and provide security for classified files and electronic data.

Designs and Techniques for Barrier Free Showers ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s8761/www.aecdaily.com/course/792196

This course focuses on barrier free shower design and installation. Following a brief review of the reasons, benefits, and legal requirements for barrier free showers it summarizes the features and attributes of shower assemblies, relevant industry standards, waterproofing membranes and drains, best practices, installation methodology, installation tips and techniques, and walk/roll in showers. It includes a review of the design considerations and advice for the creation of perfectly performing showers which follow the latest design trends.

Designing with Modular Mechanical Supports ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s1134927/www.aecdaily.com/course/1144422

Modular mechanical support systems are flexible and adaptable frameworks used in mechanical, electrical, and plumbing (MEP) applications. They replace fabricated steel and streamline the installation process. This course presents the history of modularization in construction and the functions, features, benefits, and applications of several modular mechanical support systems, including structural steel framing, adjustable pipe supports, pipe racks, and skid systems.

Introduction to Existing Building Retrofits ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s10541/www.aecdaily.com/course/1049838

This program introduces building retrofits as a method to achieve green building standards by adapting existing structures. While a building retrofit may have several types of interventions, effective air sealing improves the durability of the structure and occupant comfort, health, and safety. This course includes a detailed look at sources of air leakage and the various methods available to address this infiltration. Several real-world examples demonstrate the importance of identifying the source of air leakage, investigating existing conditions, and proper detailing.

What Is Fundamentally Wrong with ISO R-Value and How Do We Fix It? ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s904648/www.aecdaily.com/course/1091510

Understanding the performance of building materials in real-world conditions is key to a successful building design. Recent studies have shown that the commonly reported R-values of polyisocyanurate foams at room temperature may overstate their real-world performance in cooler temperatures, potentially resulting in gaps in designed building enclosure assembly performance and quality. Through a theoretical framework and empirical data, this course shows that optimized polyisocyanurate foam insulation results in better performance, leading to improved energy savings and reduced potential for condensation. Participants are encouraged to explore innovative insulation materials, understand differences between them, and match optimal materials to specific applications while meeting modern construction codes and regulations. By matching the right insulation materials to the application, architects can contribute to energy-efficient and cost-conscious construction practices and help buildings reduce their impact...

Improving Soundscapes in Educational Spaces with PET Felt ( ~ 1 hour, 15 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s14798/www.aecdaily.com/course/965465

Undesirable acoustics in educational spaces have long been considered averse to our goals to effectively teach, create, collaborate, listen, and learn. Now, in the wake of implementing pandemic protocols, our acoustic comfort in these spaces is greatly challenged. This course examines the impacts of poor soundscapes in educational facilities and introduces innovative solutions for improving acoustics in these areas while keeping us comfortable and safe from exposure to emerging viruses.