Building Knowledge and Connections
Displaying 1 - 25 of 140 results.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s679669/www.aecdaily.com/course/892209
Vinyl is strong and resistant to moisture and abrasion, and therefore is the most widely used plastic for building and construction. This course presents vinyl flooring and its manufacturing process, testing standards, and performance characteristics. The course discusses the environmental impacts of vinyl flooring throughout its life span and its contributions to meeting green building codes and standards.
https://redirect.aecdaily.com/s1042490/www.aecdaily.com/course/1060032
Vinyl has long been a material of choice for construction products for interiors and exteriors because of its durability, cleanability, affordability, and suitability for a vast range of applications. This course furthers the conversation by discussing vinyl’s recyclability and sustainability and the attributes of laminated rigid PVC exterior and interior wall panels and siding and soffit products.
https://redirect.aecdaily.com/s1152/www.aecdaily.com/course/886891
Specialty door and frame assemblies have been developed that are designed specifically for the built healthcare environment where performance criteria are critical. Reviewed in this course are specialty door and frame assemblies that meet the challenges of infection prevention, building cleanliness, patient privacy, and increased security, as well as containment of radio wave and radiation interference in hospitals and clinics.
https://redirect.aecdaily.com/s10541/www.aecdaily.com/course/895029
As some of the earliest building materials, masonry and concrete have been used for their durability and strength. However, masonry architecture, both historical and contemporary, has been left vulnerable to water—the single most damaging element to masonry in our environment. This course identifies common water-related problems for masonry and concrete, describes protective treatments that increase masonry durability, and explains the process for safely selecting and applying a protective treatment.
https://redirect.aecdaily.com/s2955/www.aecdaily.com/course/1203248
The AIA Materials Pledge identifies five impact areas that building products and materials can and should address: ecosystem health, social health and equity, circular economy, climate health, and human health. This course reviews the concepts, certifications, and tools designers can apply to choose materials that support these five impact areas, including the mindful MATERIALS Common Materials Framework (CMF), the industry’s first common language for sustainable building materials. Finally, the course presents practical examples of exemplary products and materials and assesses them using this framework.
https://redirect.aecdaily.com/s987165/www.aecdaily.com/course/1010278
Concrete products such as precast pieces, pavers, and terrazzo have long provided builders with a flexible range of options for their projects. Beyond their versatility, these concrete products are highly sustainable, thanks to their ability to be recycled, low carbon footprint, and long life span.
https://redirect.aecdaily.com/s1140981/www.aecdaily.com/course/1183825
This course examines the role of access doors and panels in building design. It covers their functions, material options, and performance requirements. Topics include resistance to fire, sound, and moisture, as well as durability, code compliance, and integration with surrounding finishes. The course also presents best practices for specifying and installing access components that support safety, accessibility, and design continuity across a range of project types.
https://redirect.aecdaily.com/s4937/www.aecdaily.com/course/1207897
Rubber has been recycled for over a century and has been utilized in recycled rubber flooring (RRF) for more than 70 years, demonstrating its proven durability, resilience, and design flexibility. This course examines RRF as a sustainable material solution and its role in enhancing the performance of the built environment. Additionally, the course explains the rubber recycling and RRF manufacturing processes, along with the best practices for specification and installation. Also included is an overview of how RRF can contribute to credit requirements in the LEED® v5 Building Design and Construction (BD+C) and Interior Design and Construction (ID+C) rating systems and the WELL™ Building Standard v2.
https://redirect.aecdaily.com/s614935/www.aecdaily.com/course/1160610
Architectural finishes mimic the aesthetics and textures of natural materials without the cost, labor, weight, and maintenance challenges of finishes such as wood, stone, leather, and metals. This course discusses their performance characteristics, selection considerations, and proper installation techniques for interior and exterior commercial applications, including fire-rated assemblies and LEED®-certified projects.
https://redirect.aecdaily.com/s682321/www.aecdaily.com/course/856224
Sound abatement products are not just a building owner and occupant preference; minimum sound abatement ratings are required by many local building codes for multistory residential, commercial, and multipurpose buildings. Following an introduction to the basics of sound, this course presents a summary of the most common sound control methods, with a focus on the options available for floor underlayment.
https://redirect.aecdaily.com/s9559/www.aecdaily.com/course/860652
Perforated Metal, Expanded Metal, and Wire Mesh combine aesthetics, durability, and functionality. Although each product is distinct with unique characteristics, they have similar properties that provide light and sound diffusion, security, strength, and durability. This course provides a review of the characteristics and architectural applications of these products, the different materials in them, and how they achieve a safe work environment.
https://redirect.aecdaily.com/s461973/www.aecdaily.com/course/1175741
A number of third-party entities have certified the sustainable attributes of solid surfaces. This course explores those green product certifications in relation to the characteristics of 100% acrylic solid surfaces. It includes an overview of current manufacturing, fabrication, and thermoforming processes, the aesthetics, and the many possible applications and design opportunities for solid surfaces.
https://redirect.aecdaily.com/s405633/www.aecdaily.com/course/928589
Within building spaces, noise can be reduced by using materials or assemblies that isolate sound or mitigate its transmission. To do this, it is important to understand how sound moves through building materials and partitions and the impact of sound mitigation products. In this course, we look at the basics of sound as well as techniques and products to prevent sound transmission.
https://redirect.aecdaily.com/s1062476/www.aecdaily.com/course/1141294
Palm is a plentiful but underused resource with many possibilities to enhance architectural design. This course describes the growth, harvesting, and rendering of palm, how it is manufactured into flooring, plywood, and paneling products, and what to consider when specifying and installing. A detailed look at the products available as well as project examples demonstrates how palm products may apply to several credits and features in the LEED® v4.1 Building Design and Construction and Interior Design and Construction rating systems and the WELL Building Standard™ version 2.
https://redirect.aecdaily.com/s456403/www.aecdaily.com/course/966262
When installing precast concrete, it is important to plan for and know how to overcome numerous site challenges. If not dealt with properly, these challenges can prevent a project from passing inspection and can result in installation problems, moving and cracking of pavers, and safety hazards to pedestrians. This course addresses the most frequently asked questions regarding on-site paving issues to facilitate a successful installation for a variety of applications.
https://redirect.aecdaily.com/s1217617/www.aecdaily.com/course/1234470
Ceilings are typically one of the largest uninterrupted surfaces in an interior environment, yet they are often underutilized as a design opportunity. This course explores how decorative ceiling tiles can dramatically influence perception, acoustics, occupant comfort, and overall user experience while also supporting performance requirements such as durability and moisture resistance. Participants will examine how the use of contemporary decorative ceiling tiles and wall panels allows designers to move beyond the trade-off between aesthetics and functionality. By examining real-world applications and examples, the course reviews the use of decorative tiles that accommodate acoustical integration, custom printing capabilities, restoration and replication applications, and methods for creating visually impactful yet cost-effective environments across commercial, institutional, hospitality, retail, and public spaces.
https://redirect.aecdaily.com/s682008/www.aecdaily.com/course/1028664
Buildings need protection from cyber as well as physical threats. Building shielding offers several architectural solutions that contribute to the security of both building occupants and wireless systems. These solutions also help reduce unwanted solar heat and glare while providing protection from the elements and people seeking to cause harm. This course presents the security and performance benefits of shielding technology that can improve wireless performance, energy efficiency, and occupant comfort, satisfaction, and safety
https://redirect.aecdaily.com/s421150/www.aecdaily.com/course/925438
Moisture and soil gas beneath concrete slabs can cause a myriad of problems in both residential and commercial applications. The causes and consequences of these problems are reviewed in this course, along with a discussion on the types and characteristics of under-slab water vapor and soil gas barriers.
https://redirect.aecdaily.com/s904648/www.aecdaily.com/course/1035801
This course details the benefits and selection process of magnesium oxide (MgO) sheathing in multifamily and commercial construction. MgO sheathing offers structural, fire resistance, and other properties that enable architects and designers to simplify the design and installation of building enclosures. Comparisons of MgO sheathing to traditional sheathing materials such as gypsum are included.
https://redirect.aecdaily.com/s14798/www.aecdaily.com/course/1047615
Properly selected acoustical solutions are necessary to provide acoustical comfort and performance for a range of applications. This course reviews acoustic theory and design methodology to facilitate the design and specification process. A particular emphasis is placed on performance-oriented designs and strategies for different project types.
https://redirect.aecdaily.com/s867585/www.aecdaily.com/course/889638
The growing global population is creating an increased demand for resources. As a result, there is a need to replace fossil-based, nonrenewable building materials with more bio-based materials, such as bamboo. This course describes the properties of bamboo that make it a more sustainable choice, including its fast growth and CO2 saving and storing potential. It also discusses how active bamboo reforestation and the use of durable bamboo products can lead to CO2 reduction across many industries.
https://redirect.aecdaily.com/s8279/www.aecdaily.com/course/875279
While the bathroom was once a strictly utilitarian space, a growing trend among luxury consumers is to create a custom, spa-like wellness retreat right in the home. Surveys find that luxury consumers value functional and design excellence, uniqueness that reflects a creative side, and exceptional quality and value. This course examines the shower products available that help to create a personalized, multisensory wellness experience with beautifully designed pieces that meet water efficiency standards.
https://redirect.aecdaily.com/s8761/www.aecdaily.com/course/792196
This course focuses on barrier free shower design and installation. Following a brief review of the reasons, benefits, and legal requirements for barrier free showers it summarizes the features and attributes of shower assemblies, relevant industry standards, waterproofing membranes and drains, best practices, installation methodology, installation tips and techniques, and walk/roll in showers. It includes a review of the design considerations and advice for the creation of perfectly performing showers which follow the latest design trends.
https://redirect.aecdaily.com/s15612/www.aecdaily.com/course/1029637
Solid surface is a popular material choice due to its beauty, durability, and ease of cleaning. Selecting a solid surface depends on the manufacturing process, the raw materials involved, and the material’s sustainability. This course examines solid surface as a decorative material, discusses its characteristics and attributes, and compares it with other hard surface materials
https://redirect.aecdaily.com/s1217/www.aecdaily.com/course/1175410
This course examines key selection criteria for stage flooring, including fixed, sprung, and dynamic systems. It covers permanent and portable solutions, surface materials, and sustainability in material choice and life-cycle management. Case studies highlight the impact of flooring on performance quality, safety, and environmental factors. The course also addresses accessibility, installation, refurbishment, and related manufacturer services.
🍪 We use cookies to offer you a better browsing experience, analyze site traffic, personalize content, and serve targeted advertisements. Read about how we use cookies and how you can control them by clicking here. Click "cookie settings" to adjust your preferences.
