Displaying 1 - 25 of 41 results.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s1110015/www.aecdaily.com/course/1147960
Light in the hands of a lighting designer is like a brush in the hands of an artist—it can make or break a show. In this course, we’ll explore the controllable properties of light, the various lighting fixture types and configurations commonly used in a stage setting, and the power and control distribution methods that underpin an effective lighting design. We’ll also review industry standards for low- and medium-voltage control methods, the evolution of related data systems, and the changes it has wrought in the industry.
https://redirect.aecdaily.com/s485236/www.aecdaily.com/course/909216
Drying hands thoroughly is crucial for maintaining hygiene levels, and when a hand dryer is too slow, the result is many people give up trying to dry their hands and leave the bathroom with wet or damp hands. Research has shown that damp hands can transmit up to 1,000x more bacteria than dry hands. This course discusses hand-drying concepts and the advantages of hand dryers with air knife technology. It also reviews the impact the choice of hand-drying equipment has on public health, occupant comfort, facility operations, and our environment.
https://redirect.aecdaily.com/s1086508/www.aecdaily.com/course/1086515
Authorities having jurisdiction all over the world, including in all 50 US states, have mandated photoluminescent egress path markings to support safe evacuation of high-rise buildings in the case of total power failure. This course reviews photoluminescent egress path marking requirements in the model International Building Code® and International Fire Code® (2015, 2018, 2021) and identifies compliant photoluminescent path marking products. The course also discusses recommended best practices that exceed code requirements, which will reduce building operation costs and improve occupant and first responder safety.
https://redirect.aecdaily.com/s379346/www.aecdaily.com/course/945582
An energy recovery ventilator (ERV) system provides occupants with filtered, balanced, and tempered air within their living space. Airborne contaminants can be greatly reduced with ERV systems. This course provides knowledge about the need, use, design, and installation of ERVs in the modern dwelling unit and when retrofitting existing structures. The course also addresses the environmental advantages of sustainable and healthy solutions for indoor air quality.
https://redirect.aecdaily.com/s19863/www.aecdaily.com/course/1077571
Firestopping is the process of sealing openings around penetrants or in joints or gaps between fire-rated assemblies to restore hourly fire resistance ratings. It is a critical part of fire containment and a balanced fire and life safety plan. This course outlines resources and code requirements that architects and designers should be aware of while preparing specifications for firestop systems in their projects. The course also reviews common mistakes to avoid.
https://redirect.aecdaily.com/s777575/www.aecdaily.com/course/788434
Architectural resin panels are engineered to suit the demands of a wide array of interior and exterior applications and offer almost unlimited combinations of color, pattern, and design. This course presents the features and options that allow resin panels to meet design requirements for both function and beauty and discusses how resin panels may play a role in projects seeking LEED® v4 BD+C, ID+C, and O+M; Living Building ChallengeSM v3.1; or WELL Building Standard® v1 certification.
https://redirect.aecdaily.com/s525798/www.aecdaily.com/course/916201
Flexible work scheduling, telework, virtual work, and the high cost of office space are some of the drivers of the 21st century workspace. This open, flexible, adaptable, and casual space must still serve not only the technological needs of its users, but also the accessibility needs of a diverse population. This course examines the technical requirements for providing accessibility, universal design, and ergonomics in an open office space and looks at a variety of solutions in the functional areas of the office: open office areas, the workspace, and collaboration areas.
https://redirect.aecdaily.com/s18122/www.aecdaily.com/course/1037314
Energy creation, distribution, and consumption are all in a period of transition. Understanding this transition and its benefits is critical to sustainable transitional energy planning (STEP). This course reviews the nature of the transition, the forces driving it, emerging energy systems and sources, and international and national examples. It details the process required for STEP and provides a comprehensive overview of the many renewable energy options now viable for community energy systems. It concludes with a series of illustrated sample plans and projects.
https://redirect.aecdaily.com/s525798/www.aecdaily.com/course/551827
Expansion or modification of electrical cabling is rarely considered yet occurs during the lifetime of most buildings. Expansion of in-wall cabling requires additional work, trades, and possibly electrical service interruption, but cable tray facilitates removal and addition of cabling. This course reviews two types of cable tray—ladder tray and wire mesh tray—their components, characteristics, and applications and code-related installation information.
https://redirect.aecdaily.com/s525798/www.aecdaily.com/course/836832
The commercial space design trend toward open plans has had a major impact on interior electrical and digital infrastructure. Offices, hotels, retail spaces, and transit areas all utilize open spaces, each with their own specific issues and requirements. This course provides designers with the information required to provide code-compliant, user-friendly, and convenient power, data/communication, and AV access for a wide variety of spaces and end users, including facility managers, cleaning staff, and visitors.
https://redirect.aecdaily.com/s801701/www.aecdaily.com/course/859212
A large portion of new commercial and residential buildings built today are equipped with clear, floor-to-ceiling glass. Does this new expansive area of glass lead to daylight optimization? This course explains the impacts of daylighting on human health and building occupant comfort. Proactive and reactive automated shading systems are discussed, and the course explains how a properly designed shading system can reduce whole-building energy consumption. Automated shading systems in projects of various scopes and scales are also discussed.
https://redirect.aecdaily.com/s525798/www.aecdaily.com/course/1030924
Lighting controls allow homeowners to adjust lamps and light fixtures from anywhere in the home without special wiring or expensive master controllers. Lighting controls can be integrated into a home for single-room, multiroom, whole-house, or automated systems. This course discusses the role of lighting in design and occupant comfort and then outlines how lighting controls can benefit occupant behavior, health, and productivity and the appeal and performance of the home, especially regarding energy efficiency.
https://redirect.aecdaily.com/s749821/www.aecdaily.com/course/1033512
Not only is standing seam metal roofing (SSMR) robust and durable, but the seam itself also provides a convenient anchorage point for the mounting of rooftop equipment. This course reviews the features and advantages of SSMR in terms of durability and sustainability, and the appropriate attachment solutions for mounting equipment. The course focuses on nonpenetrating roof seam clamps and design considerations for their use with snow retention and solar panel systems.
https://redirect.aecdaily.com/s9351/www.aecdaily.com/course/1036949
Electric heating systems have been in use for over a century, and in that period, they have significantly advanced in terms of their efficiency, cost effectiveness, safety, versatility, and appearance. Recently, electricity production itself has become more and more environmentally friendly and economically viable. This course explores how the wide range of contemporary electric heating options can efficiently and economically address virtually every heating need in every building type and thus capitalize on the steadily increasing benefits of electricity to create the most environmentally responsible and economically viable heating solutions.
https://redirect.aecdaily.com/s504914/www.aecdaily.com/course/611973
Falls are responsible for more open wounds, fractures, and brain injuries than any other cause of injury. Photoluminescent (PL) exit path markers have proven to provide safe and quick egress in all light conditions for occupants and fail-safe guidance to first responders entering unfamiliar surroundings in the event of an emergency. This course discusses the benefits of PL safety products and the codes and testing standards related to PL way-finding systems.
https://redirect.aecdaily.com/s4877/www.aecdaily.com/course/697331
Fireplaces remain one of the most desirable household features for homeowners, complementing a range of different lifestyles and appealing to a range of demographics. This course provides an overview of electric fireplaces, focusing on their design possibilities, flame technologies, ease of installation, environmental efficiency, cost-saving benefits, and their advantages over gas and wood-burning fireplaces.
https://redirect.aecdaily.com/s9727/www.aecdaily.com/course/845810
The materials we use have a significant impact on the environment, our communities, and our health. Consequently, material transparency—wherein manufacturers disclose vital sustainability information about their products—is an increasingly necessary element of modern life. This course examines the tools and resources that are available for both manufacturers and the A&D community that effectively communicate transparency information and optimization of building products. Also reviewed are the benefits of the new-generation insulated metal panels (IMPs) designed to achieve a trusted range of health and wellness certifications.
https://redirect.aecdaily.com/s707030/www.aecdaily.com/course/940933
Light-manipulating materials use internal channels to capture, bend, scatter, and redirect light and create visually stunning spaces. Panels and slabs in resin, glass, and terrazzo make an experiential surface for privacy screens or signage, primary or accent lighting, and countertops or flooring—anywhere the interplay of light and shadow is desired for beauty and inspiration. This course describes the different types of light-manipulating materials and substrates, design and installation options, and the contributions of these products to sustainability goals as well as occupant health, well-being, and engagement in a wide range of dynamic, unique applications.
https://redirect.aecdaily.com/s9351/www.aecdaily.com/course/978473
Highly customizable electric heating solutions can provide either the main or supplemental heat for most indoor and outdoor spaces. Such solutions can harmonize beautifully with every architectural context and building configuration while addressing the full range of health, safety, comfort, and energy efficiency issues facing contemporary designers. This course examines the many supplemental electric heating solutions and devices available, their capabilities and configuration options, and how they can be customized to suit every unique architectural and engineering demand. It concludes with several illustrated cases.
https://redirect.aecdaily.com/s840811/www.aecdaily.com/course/862566
By design, automatic pedestrian doors provide easier, more convenient access than manual doors for a wide variety of building types, and their popularity in commercial design continues to grow. Reviewed in this course are the available options of automatic door solutions, including sliding, swinging, ICC/CCU, and revolving door systems. Also discussed are the code requirements and considerations relating to automatic doors for proper specification.
https://redirect.aecdaily.com/s584379/www.aecdaily.com/course/593140
Daylighting is the controlled admission of natural light into a building. It takes into consideration both direct and diffuse sunlight and reduces use of electric light, thereby decreasing energy costs. By controlling daylight, solar heat gain can be minimized, lowering the demand on HVAC systems. This course evaluates a variety of daylighting strategies for commercial applications and includes discussions about the relevance of daylight factor calculations and the impact fabric characteristics have on a shading solution.
https://redirect.aecdaily.com/s8170/www.aecdaily.com/course/1137958
As more companies invest in solar to generate clean power for their operations, meet environmental goals, or save money on electrical bills, architects and building owners may need to be prepared to accommodate rooftop photovoltaic (PV) systems in both existing and new buildings. This course provides an introduction to rooftop PV systems, including a discussion of modules, components, and attachments, and best practices for a durable roof and PV system.
https://redirect.aecdaily.com/s801701/www.aecdaily.com/course/822556
Daylight is an essential part of our health and well-being, but it needs management. Shading strives to maximize daylight without compromising building occupant comfort and well-being. This course explores the role daylight has within the built environment and its impact on occupants and energy usage, with a focus on how to better specify shadecloth based on factors such as project type, solar optical properties, shadecloth composition, and environmental factors.
https://redirect.aecdaily.com/s649402/www.aecdaily.com/course/1037124
It’s easy to be overwhelmed by outdoor solar lighting specs and components, especially when every manufacturer presents its products differently. Lighting professionals can help clients put these manufacturers on an equal playing field. Providing an in-depth introduction to the technology and benefits of off-grid solar lighting, this course explores why clients choose commercial solar lighting, what components make up a solar lighting system, and the three steps lighting professionals can take to ensure their clients choose a reliable, efficient, and cost-effective solution that meets their unique expectations.
https://redirect.aecdaily.com/s525798/www.aecdaily.com/course/965090
Today’s buildings are evolving from independently functioning structures to intelligent buildings that interact with occupants and surrounding buildings. This trend has impacted the design, operation, and maintenance of data centers around the globe due to the increased demand for data and digital communication and has resulted in more high-performance data centers. This presentation addresses the specific needs of data centers and presents high-performance design solutions that support sustainable design.
🍪 We use cookies to offer you a better browsing experience, analyze site traffic, personalize content, and serve targeted advertisements. Read about how we use cookies and how you can control them by clicking here. Click "cookie settings" to adjust your preferences.
