Building Knowledge and Connections
This page is deprecated. You are probably looking for the Latest Releases page.
Displaying 1 - 615 of 615 results.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s14532/www.aecdaily.com/course/1138134
Traditional and modern, linear direct vent gas fireplaces safely provide supplemental heat while preserving indoor air quality. The course explores gas fireplace venting systems and heater- and decorative-rated fireplace options, electric fireplace options, functions, aesthetics, and applications. Also discussed are innovative technologies that enhance performance, applicable codes and standards, safety requirements and precautions, and size considerations.
https://redirect.aecdaily.com/s20141/www.aecdaily.com/course/925265
ICF construction is cost effective and sustainable, and is a superior way to build stronger, quieter, healthier, and more energy-efficient commercial structures. This course explores insulated concrete form (ICF) construction, describing the forms themselves and their construction, performance, and sustainable benefits. Also presented are design guidelines, the installation process, flooring systems, and commercial project applications.
https://redirect.aecdaily.com/s652237/www.aecdaily.com/course/854915
Artificial turf is essentially a flooring fabric made from a variety of materials and layers. Since its creation, the artificial turf industry has studied the behavior of natural grass and the safety and sustainability of artificial grass. This course examines today’s artificial grass systems and discusses how they are carefully planned, designed, and built to suit the specific needs of an outdoor residential or commercial landscape.
https://redirect.aecdaily.com/s775747/www.aecdaily.com/course/794696
In applications where wood may be exposed to moisture, insects, or fungal organisms, preservative-treated wood can ensure a project’s durability. This course reviews: the manufacturing process for pressure-treated wood; types of preservative treatments and the required levels of retention as dictated by the end-use application, desired service life, and exposure conditions; American Wood Protection Association (AWPA) Use Category standards; current issues concerning preserved wood in residential and commercial construction; and Best Management Practices (BMPs) for aquatic uses.
https://redirect.aecdaily.com/s775747/www.aecdaily.com/course/815408
For some applications, building codes provide for the use of fire-retardant-treated (FR) wood products as an alternative to noncombustible materials. To ensure that FR wood products are properly specified, it is important to understand how these products are made, their formulations, and the building code references that guide their use in construction. This course offers a review of FR wood products, including their manufacture, the applications and types of fire retardants that are available, and the factors that must be considered to ensure FR wood products are properly specified for code compliance.
https://redirect.aecdaily.com/s831648/www.aecdaily.com/course/1121290
Explore the intricate realm of access control systems, with a focus on integrating electrified hardware and how to effectively specify access to facilities. Become familiar with electrified hardware components such as electric strikes, magnetic locks, electrified panic devices, and electrical locksets and how they interact with access control systems to regulate entry and exit points while meeting code requirements.
https://redirect.aecdaily.com/s921773/www.aecdaily.com/course/962287
Metals are ubiquitous in today’s hardscape and are used in a variety of applications. This course reviews the important considerations related to the proper material, finish, and manufacturing technique to meet the function, aesthetic, and budget of metal designs for hardscape applications.
https://redirect.aecdaily.com/s921773/www.aecdaily.com/course/1009739
Changing climate and land use patterns have necessitated a greater focus on stormwater management. The trench drain industry has developed in a rather fragmented way over the decades, with each manufacturer using their own unique reference points for dimension, load rating, and other criteria. The purpose of this course is to clear up the resulting confusion and provide best practices and a real-world understanding of the multiple variables at play on the project level.
https://redirect.aecdaily.com/s976306/www.aecdaily.com/course/979570
Acrylic solid surface is an attractive design solution, delivering enhanced aesthetics combined with superior performance properties. This course compares the characteristics of 100% acrylic solid surface to other surface materials and reviews the driving factors that contribute to its growing role in sustainable design strategies. Also discussed are the manufacturing, fabricating, and thermoforming processes of acrylic solid surface and the related green standards and certification programs.
https://redirect.aecdaily.com/s988795/www.aecdaily.com/course/999840
Net zero energy ready buildings are a popular topic in today's world of climate change. This course explores how energy efficiency has expanded toward exterior wall assemblies, where thermal bridging and thermally broken subframing systems are becoming the new norm.
https://redirect.aecdaily.com/s1036619/www.aecdaily.com/course/1065768
Bamboo is a versatile building material that brings warmth and character to indoor applications such as flooring, furniture, and wall and ceiling panels; an innovative process also allows bamboo to be used outdoors in decks, soffits, and siding. This course reviews the material technologies that make bamboo products with reduced environmental impacts and better performance than traditional materials and discusses their potential to meet requirements of the LEED® v4.1 Building Design and Construction and Interior Design and Construction rating systems and the WELL Building Standard™ version 2.
https://redirect.aecdaily.com/s1073957/www.aecdaily.com/course/1101030
Slate has been used for centuries as a long-lasting building material, and its natural beauty is unsurpassed. Today, rainscreen cladding systems have been developed to adapt natural slate to new architectural demands for sustainable building design approaches. This course explores the energy efficiency and moisture management benefits of a rainscreen system in combination with the durability and versatility of slate. The different designs and fastening systems are reviewed, and case studies demonstrate the advantages and possibilities for sustainable and beautiful slate projects.
https://redirect.aecdaily.com/s9294/www.aecdaily.com/course/971215
Architectural canopies are versatile additions to a wide variety of commercial buildings and serve both functional and aesthetic purposes. They can highlight entrances, create visual interest, support signs and lights, and offer protection from snow, rain, and sun. This course examines canopy types, styles, materials, finishes, and wall attachment considerations and offers guidance on how to select the right system for a project. Case studies demonstrate how canopies can assist in solving common building design challenges.
https://redirect.aecdaily.com/s431285/www.aecdaily.com/course/1106562
Vinyl membrane decking can prolong the life cycle of various building components; however, performance and durability depend on vinyl membrane selection, specification, and installation. Fortunately, vinyl membrane manufacturers can support architects, contractors, and specifiers through all phases of the project to ensure a successful outcome. This course examines walkable, waterproof roof deck membranes and roofing systems and includes discussions on system characteristics, design considerations, and how to properly specify roof deck membrane systems.
https://redirect.aecdaily.com/s1039189/www.aecdaily.com/course/1049844
Manufacturers, industry groups, architects, designers, and homeowners all share an expectation of safety in the buildings we occupy and use every day. This course discusses the key chapters where important exterior wall fire provisions can be found in the International Building Code® and examines many common features of global fire incidents. The course also describes the NFPA 285 fire test and discusses the new Annex B in the 2023 edition of NFPA 285. Finally, there is a discussion of the code compliance pathways when exterior walls are required by the IBC® to be tested and comply with NFPA 285.
https://redirect.aecdaily.com/s5759/www.aecdaily.com/course/1030625
Metal roof and wall systems have long been specified for commercial, residential, and industrial buildings because they have a lengthy history of durability, reliability, and resilience. This course examines the attributes of metal panel systems and the design options that make metal-clad buildings sustainable, attractive, and suitable for a variety of applications and environmental conditions.
https://redirect.aecdaily.com/s12198/www.aecdaily.com/course/971086
Ground improvement refers to the application of geotechnical construction techniques to improve the performance of soils. These techniques are used when existing soils cannot provide satisfactory support of the planned structure. They improve the ground performance by increasing the strength and stiffness of the soil mass through densification, reinforcement, and/or cementing of soils. This course introduces ground improvement technologies and provides an in-depth review of aggregate piers and their design, installation, and benefits.
https://redirect.aecdaily.com/s928136/www.aecdaily.com/course/942139
Innovative and sustainable, powder-coated/sublimated extruded aluminum products are ideal for exterior, interior, and high-traffic architectural applications. Reviewed in this course is an overview of the properties and finishing processes of this material along with discussions of its applications, design criteria, and testing standards.
https://redirect.aecdaily.com/s1125667/www.aecdaily.com/course/1152569
In this course, we will review the history and evolution of synthetic turf, the most popular applications, and various types of turf intended for different uses. We will also review synthetic turf installation basics, present some insight into the manufacturing process, explore recent innovations, and conclude with detailed specifications for selecting the right type of turf.
https://redirect.aecdaily.com/s3515/www.aecdaily.com/course/969656
The potential for scalding from point of use hot water affects all of us. While the very young and the very old are more susceptible, no one is immune from scalding danger. An understanding of the potential for scalding, as well as the physiology of burns from hot water, can guide our design choices and significantly reduce the danger to people using facilities that commonly supply hot water, such as lavatories, baths, and showers. This course discusses the potential for scalding, the physiology of burns due to hot water, and who is most susceptible. It also discusses the relevant codes and the fixtures available to designers that can help reduce scalding and burn potential.
https://redirect.aecdaily.com/s20642/www.aecdaily.com/course/1095851
Third-party environmental product declarations (EPDs), using a life-cycle analysis (LCA) approach, provide a comprehensive analysis and quantification of a product’s sustainability. This course examines how EPDs can inform sustainable site furniture selection and how the use of sustainable site furniture can contribute to meeting various credit requirements of LEED® v4.1 Building Design and Construction, Sustainable SITES Initiative® v2, and the WELL Building Standard™ version 2.
https://redirect.aecdaily.com/s796722/www.aecdaily.com/course/961769
Synthetic or artificial grass bears virtually no resemblance to its early version produced over fifty years ago. The current product is much more aesthetically pleasing, safer, softer, and durable, made with environmentally friendly materials, highly customizable to suit many indoor and outdoor uses, and recyclable and nonflammable. This course details the many sustainable attributes of this material; its benefits, construction, and certifications; and numerous sample installations.
https://redirect.aecdaily.com/s1158080/www.aecdaily.com/course/1167954
This course examines threats to window and door integrity in buildings, including forced entry, ballistic impact, storm debris, and blast pressure. It covers retrofit and replacement approaches that strengthen glazing systems, explains relevant testing protocols, and addresses misleading performance claims. The course concludes with guidance on how to assess existing conditions and specify solutions that support occupant safety, risk mitigation, and building resilience.
https://redirect.aecdaily.com/s719/www.aecdaily.com/course/870117
Single-skin metal siding can be used for a wide range of projects, from commercial buildings to educational, healthcare, residential, agricultural, and even high-end architectural designs. These siding panels can also contribute to green designs and certification programs. This course explores the different types of single-skin metal siding, specification details, and performance and design considerations.
https://redirect.aecdaily.com/s719/www.aecdaily.com/course/903329
Designing to accommodate thermal movement is just one of the many critical details for the long-term success of a metal roof installation. This course covers the design and specification considerations and architectural details that impact project requirements, as well as the components and the energy-efficient features of metal roofing assemblies.
🍪 We use cookies to offer you a better browsing experience, analyze site traffic, personalize content, and serve targeted advertisements. Read about how we use cookies and how you can control them by clicking here. Click "cookie settings" to adjust your preferences.
