This page is deprecated. You are probably looking for the Latest Releases page.
Displaying 476 - 500 of 641 results.
FIRST PREV [426-450] [451-475] [476-500] [501-525] [526-550] NEXT LASTScan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s904648/www.aecdaily.com/course/1091510
Understanding the performance of building materials in real-world conditions is key to a successful building design. Recent studies have shown that the commonly reported R-values of polyisocyanurate foams at room temperature may overstate their real-world performance in cooler temperatures, potentially resulting in gaps in designed building enclosure assembly performance and quality. Through a theoretical framework and empirical data, this course shows that optimized polyisocyanurate foam insulation results in better performance, leading to improved energy savings and reduced potential for condensation. Participants are encouraged to explore innovative insulation materials, understand differences between them, and match optimal materials to specific applications while meeting modern construction codes and regulations. By matching the right insulation materials to the application, architects can contribute to energy-efficient and cost-conscious construction practices and help buildings reduce their impact on the environment.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s904648/www.aecdaily.com/course/1091539
Protected membrane roof (PMR) assemblies have been widely adopted in low-slope commercial buildings since the late 1960s. Also known as inverted or upside-down roofs, PMR assemblies move the waterproofing membrane from the top of the roof assembly to the surface of the structural deck. This course explores how PMR assemblies provide several advantages over conventional roof assemblies, offering superior protection against water penetration and enhanced energy efficiency. The course also shows how PMR assemblies allow for the creation of green roofs or blue roof systems. With a proven record of reliability, PMR assemblies present a compelling solution for architects seeking innovative, sustainable, and efficient roofing options.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s951401/www.aecdaily.com/course/964377
Today’s building professionals seeking better moisture management and energy efficiency from the exteriors of their projects are turning to rainscreens as a solution to both. Wood-plastic composite (WPC) provides a durable and long-lasting material suitable for use in rainscreen systems, decks, railings, and more. Reviewed in this course are the manufacturing process, performance and green benefits, and installation of WPC cladding that is fully capped with a polymeric plastic “shield,” providing long-term resistance to moisture, staining, and fading.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s951401/www.aecdaily.com/course/1094326
While natural wood has traditionally been viewed as an ideal material for decking boards and tiles, wood-plastic composite (WPC) has emerged as a durable, easy-to-maintain, and sustainable alternative. This course provides insights into the advantages of composite decking, especially fully capped products, and explores topics including its environmental benefits; contribution to occupant wellness and safety; resistance to fading, staining, and other potential defects that decking experiences; various applications; and attractive aesthetics.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s652237/www.aecdaily.com/course/854915
Artificial turf is essentially a flooring fabric made from a variety of materials and layers. Since its creation, the artificial turf industry has studied the behavior of natural grass and the safety and sustainability of artificial grass. This course examines today’s artificial grass systems and discusses how they are carefully planned, designed, and built to suit the specific needs of an outdoor residential or commercial landscape.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s999495/www.aecdaily.com/course/1068417
Safety and security are top priorities for travelers. The safeguarding of valuables provides guests with peace of mind that their items are secure and helps to protect a hotel’s reputation. This course reviews the features, types, and installation options of battery-operated, digital safe solutions designed to protect against theft without the need for keys or cards.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s1036619/www.aecdaily.com/course/1065768
Bamboo is a versatile building material that brings warmth and character to indoor applications such as flooring, furniture, and wall and ceiling panels; an innovative process also allows bamboo to be used outdoors in decks, soffits, and siding. This course reviews the material technologies that make bamboo products with reduced environmental impacts and better performance than traditional materials and discusses their potential to meet requirements of the LEED® v4.1 Building Design and Construction and Interior Design and Construction rating systems and the WELL Building Standard™ version 2.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s5147/www.aecdaily.com/course/853451
Roofing technologies have come a long way from labor-intensive BUR systems that achieved watertightness through redundancy. Today’s single-ply membranes are thin, light and reliable, and installation is safe and efficient. This course focuses on thermoplastic single-plies, particularly those that are PVC based, and explores their benefits and limitations as well as the important factors to consider when selecting a roof system, ranging from fastening techniques to warranties to sustainability.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s5147/www.aecdaily.com/course/856363
Standing seam metal roofing has been used successfully in the United States for centuries, and proper specification is key to realizing its intended performance. Examined here are: the factors driving the demand for standing seam metal roof and wall systems; standing seam panel basics; gauge and grade; oil canning; specification considerations; testing standards; and forming, delivery, storage, handling and warranty.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s5147/www.aecdaily.com/course/856360
With the advent of “cool” single-ply roofs featuring heat-reflective exterior surfaces and the use of mechanical attachment, new questions have emerged concerning the internal forces at play within the roofing system, especially in regard to vapor movement and the potential for moisture condensation within the roof. This course reviews the fundamentals of vapor movement in roofing systems, current roof condensation research and the tools available to assess roof condensation. It also provides the building design professional with strategies to deal effectively with moisture movement within the roofing system.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s5147/www.aecdaily.com/course/1085664
Today’s business environment presents significant challenges for commercial roofing systems. Shortages and disruptions in the supply chain, coupled with a diminishing labor force, have led to uncertainty, inflation, and scheduling difficulties for many projects. However, these challenges also open doors for innovative solutions. This course explores the financial and environmental advantages of using a PVC roofing system. It also highlights the benefits of choosing a roofing system from a single supplier.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s7816/www.aecdaily.com/course/802273
Interlocking concrete pavers (ICP) have the ability to spread applied loads via the interlock between each unit. This means that the surface does not respond structurally as single pavers but as a composite paved surface. This structural characteristic of ICP allows the design method for these pavements to be based on flexible pavement design. In this course, we examine the ASCE and ICPI structural design methods for ICP and review examples using different soil strengths/stiffnesses and traffic uses. Finally, we survey the design and construction support material and software available from the Interlocking Concrete Pavement Institute.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s7816/www.aecdaily.com/course/865795
Stormwater management is a critical component in any municipality to retain and infiltrate increased runoff volumes and flow rates from developed land that creates increased impervious cover (roofs and pavements). The course discusses the hydrologic and structural design fundamentals of permeable interlocking concrete pavement (PICP) and why it is an excellent choice to help meet stormwater management goals. Discussions include the benefits of using PICP, components of PICP, design and construction considerations and how use of PICP can help earn LEED® credits.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s7816/www.aecdaily.com/course/977173
Increased energy efficiency in both new and existing construction continues to be a large factor behind the design decisions we make and the materials we choose to integrate into our buildings. Concrete masonry construction can provide a wide range of benefits. This course illustrates how building envelopes constructed with concrete masonry create high-performance buildings that can exceed energy code requirements.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s7816/www.aecdaily.com/course/990200
While all pavements require maintenance and eventually rehabilitation, the modular nature of interlocking concrete pavement (ICP) requires maintenance procedures distinctly different from those for monolithic pavements. This course provides information on surface cleaning, sealers, sealing procedures, and joint sand stabilization. Repair procedures for the subgrade, base, bedding, and paver layers are also provided. Snow management techniques are addressed, and the course concludes with an in-depth look at pavement management using ASTM procedures for establishing a pavement condition index.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s7816/www.aecdaily.com/course/991693
As impervious land cover increases, so does the need for stormwater management. Concrete grid pavements provide increased infiltration rates, positively affecting runoff flow while decreasing erosion. This course introduces the range of grid pavement and erosion control applications and provides design and construction guidelines. Environmental performance is defined via conclusions from several research projects. Concrete grid pavements require minimal maintenance when properly designed and installed in appropriate applications. This course also includes an overview of how concrete grid paving units can be used to meet a number of LEED® v4.1 BD+C credit requirements.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s7816/www.aecdaily.com/course/1009125
The inherent properties of concrete masonry, including strength, durability, and fire safety, have been well documented, though a perception of high cost persists. Due to significant changes to codes and standards that increased the flexibility of concrete masonry structural design, this construction method may also offer cost-effective and energy-efficient alternative solutions. This course reviews changes to ASTM C90 and the masonry design standard and includes a discussion on the benefits and opportunities these requirements bring.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s7816/www.aecdaily.com/course/1073772
With the global rise in natural disasters and the increasing need for sustainable environments, resiliency has become a necessity in the design and building industries. This course provides an overview of resilient design, how it relates to building codes and standards, and the role it plays in ensuring the safety and sustainability of the built environment. It examines the role masonry construction plays in meeting resilient design goals and the inherent properties of masonry that make it resilient and provides examples and case studies of resilient design strategies.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s840811/www.aecdaily.com/course/862566
By design, automatic pedestrian doors provide easier, more convenient access than manual doors for a wide variety of building types, and their popularity in commercial design continues to grow. Reviewed in this course are the available options of automatic door solutions, including sliding, swinging, ICC/CCU, and revolving door systems. Also discussed are the code requirements and considerations relating to automatic doors for proper specification.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s13218/www.aecdaily.com/course/839272
Concrete is often the substrate for both new and existing floors. Transforming the surface into a finished floor is far more sustainable than consuming additional flooring materials, adhesives, and transportation-related energy to install a floor covering. This course discusses the stages and options of the concrete polishing process, recognizes benefits of recent advances in concrete densification chemistry, and provides an overview of the limitations and possibilities for concrete floor finishes.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s13218/www.aecdaily.com/course/912443
Natural fibers have been used for over 2,000 years as a method to strengthen building materials. Cellulose fiber provides an excellent alternative to traditional secondary reinforcement, reducing plastic shrinkage cracks and improving durability, impact resistance, shatter resistance, and freeze/thaw resistance without compromising the appearance or finishability of a concrete surface. This course covers the evolution of fiber, its benefits, and why it is a sustainable material.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s13218/www.aecdaily.com/course/938725
Color is often used functionally across many design elements; this can also be done with concrete by simply dosing standard concrete mix designs with pigment. Using pigment, concrete can be transformed from a plain, common material into a beautiful, sustainable, and enduring building element. Adding pigments to concrete elevates a project's quality and impact. This course presents basic knowledge of how concrete pigments are manufactured and how they are measured and dispensed to produce the desired color hue and intensity capable of elevating a project to the next level.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s682321/www.aecdaily.com/course/856224
Sound abatement products are not just a building owner and occupant preference; minimum sound abatement ratings are required by many local building codes for multistory residential, commercial, and multipurpose buildings. Following an introduction to the basics of sound, this course presents a summary of the most common sound control methods, with a focus on the options available for floor underlayment.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s904648/www.aecdaily.com/course/1123415
New building materials don’t come around very often, and in some cases, an early high-profile stumble can shape perceptions of an otherwise valuable technology. Learning from those mistakes, however, is a fundamental element of driving technical innovation, and real, robust solutions to known issues can ultimately produce the highest level of performance. Magnesium oxide-based composite panels have been used as exterior wall sheathing for several decades due to a number of highly desirable properties, including resistance to fire, dimensional stability, high strength, and other attributes. Early iterations of boards were found to have issues related to moisture and chemical stability, leading to premature failure of the building façade but also teaching the industry specific factors that needed to be improved in future generations of board. Now, as a maturing product category, the enabling technology of how to make consistent, high-quality boards is well known, even if not universally practiced. In this presentation, we review the basics of MgO chemistry, how boards incorporating MgO cement have evolved over time to address early issues in board performance, and how this technology can be incorporated into building exterior wall systems with many favorable attributes.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s403098/www.aecdaily.com/course/1123475
This course discusses the code requirements for thermal and ignition barriers for spray polyurethane foam, the testing required, code requirements for vapor retarders depending on climate zone, and how these coatings are installed.