Sound and Noise Control in Hospitality Facilities ( ~ 1 hour, 15 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s14798/www.aecdaily.com/course/879383

The hospitality industry thrives on positive customer experiences. These experiences are often shared on social media, and reviews of a restaurant or hotel now commonly include the acoustical aspects of the experiences. Hospitality venues must be constructed to the highest standards in order to achieve the necessary level of customer satisfaction; this includes providing a positive acoustic environment for a wide range of situations. In addition to reviewing the basics of sound, sound movement, and sound measurement, this course details the comprehensive range of applications available to the designer to block unwanted noises, control the acoustics in large venues, and provide complete privacy where it is needed while improving the aesthetic appeal of each space as a result.

The Solar-Plus-Storage Ecosystem ( ~ 1 hour, 15 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s1092062/www.aecdaily.com/course/1134323

Residential solar power generates clean energy, reduces carbon footprint, protects against rising electricity rates, and protects property from outages, but it is only effective during daylight hours. Adding battery storage to a solar system—called solar plus storage—removes this limitation and moves a home closer to energy independence. In this course, we will review the components of a solar-plus-storage system, including selection considerations for residential rooftop solar and DC-coupled solar batteries. The course also reviews the extended system of monitoring and DC charging.

Greening the Amenity Deck ( ~ 1 hour, 15 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s727499/www.aecdaily.com/course/909065

Over time, urban parks and other open landscaped areas are being lost to development. One solution to mitigate this issue is to reconsider undeveloped areas such as building roofs to create green amenity spaces. Amenity decks can provide some alleviation of lost green space, while affording developers the potential to monetize underutilized spaces in their buildings and provide an advantage over older buildings to attract tenants.

Accessible Site Furnishings: Solutions for Comfortable & Inclusive Outdoor Seating ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s643819/www.aecdaily.com/course/1059013

Places of public accommodation and commercial facilities in the U.S. must follow the Americans with Disabilities Act (ADA) requirements regarding many facets of design and landscaping, including site furnishings. This course reviews ADA requirements for tables and benches and the benefits to communities, people, and businesses of creating accessible outdoor seating areas for all to enjoy.

Aggregate Piers: An Introduction to Ground Improvement Techniques ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s12198/www.aecdaily.com/course/971086

Ground improvement refers to the application of geotechnical construction techniques to improve the performance of soils. These techniques are used when existing soils cannot provide satisfactory support of the planned structure. They improve the ground performance by increasing the strength and stiffness of the soil mass through densification, reinforcement, and/or cementing of soils. This course introduces ground improvement technologies and provides an in-depth review of aggregate piers and their design, installation, and benefits.

High-Speed High-Cycle Doors: An Introduction to High-Performance Doors for Commercial Buildings and Parking Facilities ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s12474/www.aecdaily.com/course/926173

In commercial, industrial, and parking structures, it is important to use doors that can provide speed, safety, separation, and security. High-performance roll-up doors provide all these elements better than conventional doors. This course provides an in-depth discussion of the different types of high-performance doors—fabric, rigid, and rubber—along with their benefits and functions in different applications. The design and installation considerations for using these doors are also discussed.

Rooftop Solar Photovoltaic Systems: The Good, the Bad, & the Ugly ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s13011/www.aecdaily.com/course/797126

A rooftop solar photovoltaic system offers myriad benefits to both building owners and the environment; to maximize the benefits, however, it is important to be aware of the potential causes and effects of problems with rooftop installations. This course presents the issues to consider to prevent damaging the roof, voiding the roofing warranty, and incurring additional costs. Solar system mounting options are explored in terms of how they can help eliminate concerns around rooftop installations.

Firestop Specifications ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s19863/www.aecdaily.com/course/1077571

Firestopping is the process of sealing openings around penetrants or in joints or gaps between fire-rated assemblies to restore hourly fire resistance ratings. It is a critical part of fire containment and a balanced fire and life safety plan. This course outlines resources and code requirements that architects and designers should be aware of while preparing specifications for firestop systems in their projects. The course also reviews common mistakes to avoid.

Transitioning to a Clean Energy Future: Part 1 ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s18122/www.aecdaily.com/course/1027351

Energy creation, distribution, and consumption are all in a period of transition. Understanding this transition and its various aspects is critical to sustainable transitional energy planning (STEP). This course delves into the reasoning behind the STEP approach and its contributions to creating resilient communities and explores available exhaustible and renewable energy resources and innovations in the energy sector that can be leveraged by STEP.

Fiberglass Composite Panels: Complete Protection Against Ballistic Threat ( ~ 1 hour, 15 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s15243/www.aecdaily.com/course/928543

Unfortunately, gun violence is a reality, and design strategies must be employed to ensure a suitable level of protection and safety. This course addresses bullet-resistant fiberglass composite panels and the need for architectural armoring. The course discusses ballistic material testing and standards, the types of ballistic materials available, and fiberglass composite panel applications and installation considerations.

ADA Accessibility Guidelines: Detectable Warning Surfaces ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s925274/www.aecdaily.com/course/936318

Detectable warning surfaces are surfaces designed to warn the visually impaired of hazards in the path of travel. The Americans with Disabilities Act (ADA) and Architectural Barriers Act (ABA) accessibility guidelines require detectable warning surfaces at public rights-of-way locations. The state of California is a leader in its requirements for detectable warning surfaces. This course introduces the current guidelines and regulations regarding detectable warning surfaces, as well as the different types of surface systems and installation methods.

Bicycle Parking & Storage: Inside & Out ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s723351/www.aecdaily.com/course/907595

Lack of secure bicycle parking and storage is one of the top barriers to increased bicycle ridership. However, there is much more to selecting functional and appropriate bike storage than installing a few racks at the building sidewalk. This course examines best practices for bicycle racks and shelters for indoor and outdoor bicycle parking and storage, including typical municipal guidelines and regulations, incentives, guidance on shelters, and rack planning and design.

Fire Safety for Exterior Wall Assemblies ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s1039189/www.aecdaily.com/course/1049844

Manufacturers, industry groups, architects, designers, and homeowners all share an expectation of safety in the buildings we occupy and use every day. This course discusses the key chapters where important exterior wall fire provisions can be found in the International Building Code® and examines many common features of global fire incidents. The course also describes the NFPA 285 fire test and discusses the new Annex B in the 2023 edition of NFPA 285. Finally, there is a discussion of the code compliance pathways when exterior walls are required by the IBC® to be tested and comply with NFPA 285.

Unlocking Wastewater's Potential ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s1070292/www.aecdaily.com/course/1096090

What is wastewater energy recovery and how does it apply to the future of energy efficiency and decarbonization? In this course, we will explore how this previously overlooked source of energy loss from buildings can be utilized to endlessly recover and recycle energy within projects ranging from individual multifamily residential buildings to commercial and industrial applications and even to district energy networks. Wastewater heat recovery and transfer technologies used in small- and large-scale applications are also discussed, with case studies showcasing the practical applications and garnered benefits.

Fire Performance Testing and Compliance for Exterior Wall Assemblies ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s1039189/www.aecdaily.com/course/1089159

With limited exceptions, the International Building Code® (IBC®) requires testing and compliance with NFPA 285 for exterior wall assemblies of buildings of Types I, II, III, and IV construction containing foam plastic insulation. This course examines three methods for demonstrating that an exterior wall assembly design complies with NFPA 285, including engineering analysis. The course also discusses how and where to locate NFPA 285 information for each compliance method.

Pitfalls and Challenges of NFPA 285 Engineering Analysis ( ~ 1 hour, 30 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s904648/www.aecdaily.com/course/1155220

Engineering analysis is a necessary tool to provide fire protection and safety for our buildings. The exponential number of wall assembly combinations and detailing of enclosure assemblies in the built environment prevent the opportunity to confirm fire performance through direct testing. This is especially true with the required investment of time, effort, and cost for larger-scale tests such as NFPA 285. Qualified fire engineering teams, in partnership with third-party labs and product manufacturers, offer the opportunity to extend successful test results beyond the tested specimen through an engineering analysis report. This presentation discusses the opportunities, challenges, and limitations present when considering the acceptance of test data extended to support substitution or modification to an assembly.

Vertical Lift Innovations ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s508058/www.aecdaily.com/course/1019759

The variety of wheelchair lifts on the market can present a challenge to specifiers. Not only is there a wide range of design features, but also some lifts may not meet all ADA requirements for a given application. This course covers the features, codes, and regulatory requirements of vertical wheelchair lifts and the benefits of specifying a vertical wheelchair lift solution to both the user and the facility owner.

Underslab Vapor Retarders in Buildings ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s9572/www.aecdaily.com/course/969550

Underslab moisture is something that designers need to take into consideration in both the design and construction phases of a building project. It can cause many problems for the building and the health of its occupants over the course of its life span; however, if properly addressed during design and construction, many of these issues can be mitigated. This course looks at the different types of moisture movement that exist below the slab, examines solutions for a variety of site conditions, and reviews best practices for managing moisture.

Healthy IAQ in Energy-Efficient Buildings ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s19871/www.aecdaily.com/course/699542

As we become more aware of the levels of toxins in our environment, we are realizing that the quality of air inside our homes is just as important as the quality of air outside our homes. This course outlines why indoor air quality is so important to our health and describes how to improve indoor air quality by using a balanced ventilation system.

Water Conservation: Initiatives and Standards ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s3515/www.aecdaily.com/course/1080227

Water is one of our most valuable resources, yet many states suffer water shortages due to preventable problems such as overuse and leakages. This course discusses the increased need for water conservation and examines the requirements in CALGreen and the LEED® v4.1, Green Globes®, and BREEAM In-Use green building rating systems. The EPA’s WaterSense® initiative is also discussed, along with case studies explaining the benefits of concealed toilet systems and their contribution to water conservation. This course is one of two identical courses titled Water Conservation: Initiatives and Standards . You will receive credit for taking only one of these courses.

Architectural Aluminum Canopies for Commercial Buildings ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s9294/www.aecdaily.com/course/971215

Architectural canopies are versatile additions to a wide variety of commercial buildings and serve both functional and aesthetic purposes. They can highlight entrances, create visual interest, support signs and lights, and offer protection from snow, rain, and sun. This course examines canopy types, styles, materials, finishes, and wall attachment considerations and offers guidance on how to select the right system for a project. Case studies demonstrate how canopies can assist in solving common building design challenges.

Sun Controls: A Sustainable Design Practice ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s2955/www.aecdaily.com/course/894516

Currently, buildings are the single biggest contributor to GHG emissions, accounting for roughly half of all energy consumption in the U.S. and globally. It is crucial to reduce this level of consumption by including high-performance envelope strategies such as shading systems in all new building designs. In this course, we look at shading systems, examine shading and design strategies, and learn tips for successful selection and design.

Acoustical Concepts ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s907623/www.aecdaily.com/course/922905

The acoustical comfort level in the workplace is a key measure of the quality of the indoor environment for building occupants. This course explores key concepts and characteristics of sound, as well as speech intelligibility and privacy and their associated acoustical remedies. Also presented is the use of sound absorbers and diffusers as acoustical solutions to noise problems.

Outdoor Amenity Space Solutions for Hospitality, Commercial, and Multifamily Applications ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s591341/www.aecdaily.com/course/791836

This course reviews the trends in outdoor amenity spaces in hospitality, commercial, and multifamily developments with a focus on the use of stainless steel cabinetry in outdoor kitchen design. Included are discussions on outdoor kitchen components, mobile food and beverage service carts, and the post and panel system developed for multifamily applications.

Rainscreens, Barrier Walls, & the Insulated Metal Panel Solution ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s18795/www.aecdaily.com/course/668974

Rainscreens are a multicomponent system offering redundancy in resisting the weather; however, continuity of each component is critical. When an insulated metal panel (IMP) is used within the system, it can function as a number of these components, simplifying installation and improving performance. This course looks at IMPs acting as barrier walls behind various rainscreen systems, with a discussion on the performance characteristics for air, water, vapor, and thermal management.