Selecting and Specifying a Railing System ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s8769/www.aecdaily.com/course/1000167

Architectural railing systems offer safety, durability, strength, and design flexibility for a variety of indoor and outdoor applications. This course provides an overview of the important factors that need to be considered when selecting and specifying a railing system for a commercial or residential building project. Topics include materials and finishes, fabrication and installation, and relevant building codes and standards.

Acoustics A–Z: Products & Applications for Architectural & Industrial Noise Problems ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s14798/www.aecdaily.com/course/869959

Unwanted sound can become more than a mere annoyance. Excess noise has been found to increase stress and distraction, reduce learning and productivity, and even lead to hypertension and permanent hearing loss. This course presents an overview of how sound is described and measured and describes the many industrial and architectural products available to control noise in virtually any environment.

Firestopping Products: Regulations and Installation ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s1059942/www.aecdaily.com/course/1073612

Firestopping is more than installing sealant in an opening. It is a critical component of a building’s overall life-safety system. This course discusses how a properly installed firestop system not only protects property but, more importantly, also saves lives by inhibiting the spread of fire from compartment to compartment and buying valuable time for occupants to exit the structure in the event of a catastrophic fire.

High-Performance Coatings and Exterior Restorations ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s1084958/www.aecdaily.com/course/1111058

High-performance coatings are a necessity when it comes to protecting building exteriors and restoring them after harsh weathering and UV degradation; the right coatings prolong a building exterior’s life span and divert materials from landfills. New PVDF coating systems provide superior protection while satisfying aesthetic and environmental considerations. Their various characteristics and benefits are explored, and application methods are discussed.

Noise Control Solutions: Resilient Sound Isolation Clips ( ~ 1 hour, 30 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s405633/www.aecdaily.com/course/928589

Within building spaces, noise can be reduced by using materials or assemblies that isolate sound or mitigate its transmission. To do this, it is important to understand how sound moves through building materials and partitions and the impact of sound mitigation products. In this course, we look at the basics of sound as well as techniques and products to prevent sound transmission.

Low-Carbon Concrete Solutions for a Sustainable Future ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s390027/www.aecdaily.com/course/1148959

The strength, versatility, local availability, and ease of use of concrete help make it the most consumed manufactured substance in the world. Concrete also offers sustainability and resilience benefits: a long lifespan, low maintenance needs, durability against natural disasters, high-albedo surfaces, smoother and stiffer pavement, carbon sequestration capabilities, and increased building energy efficiency. This course describes some of the new technologies that continue to evolve to produce concrete with the same performance and benefits as traditional concrete but with a lower carbon footprint. Also discussed is how to specify low-carbon concrete using EPDs, a carbon budget, and performance-based specifications and how it can contribute to the Building Design and Construction rating systems of LEED® v4.1 and the upcoming LEED v5.

Electric Heating: Benefits, Types, and Specification ( ~ 1 hour, 15 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s4877/www.aecdaily.com/course/1114196

As natural gas lines are being phased out for new development and for those who want to move away from burning fossil fuels, it’s becoming critical for homeowners, builders, specifiers, and architects to understand the flexible application of electric heating solutions. Electric heat is a convenient way to reduce energy costs and provide reliable heating options for commercial and residential heating systems that increase occupant safety, comfort, and well-being. This course examines multiple electric heating options to meet consumer needs and provides solutions to common heating concerns.

Midrise Timber and Wood Frame Multifamily Housing: IBC Requirements and Shearwall Design ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s13048/www.aecdaily.com/course/1127123

Urbanization and increasing land costs creating a tight housing market are driving densification and multifamily residential development. There is increased interest in midrise timber construction due to the 2021 International Building Code®, which permits mass timber buildings up to 18 stories high. This course discusses current IBC® requirements for the fire design of wood structural elements in Type III and Type IV buildings. Learners will review the use of continuous rod tiedown systems for light wood frame shearwalls and uplift restraint for wood structures up to 6 stories.

Electric Infrared Heating Systems: Creating Long-Term Sustainability ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s729880/www.aecdaily.com/course/1072597

Infrared patio heaters sustainably increase safety and comfort in outdoor entertaining areas. There are many variables in creating ambient warmth, and the effectiveness and cost of heating an outdoor space depend on the design of the selected heating option. This course looks at the available outdoor heating options and their sustainability profiles, focusing on the types, color choices, mounting methods, and control options of electric infrared heaters. It includes a review of the steps required to select the best solution.

High-Performance Building Envelope Designs with Insulating Concrete Forms ( ~ 1 hour, 30 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s2426/www.aecdaily.com/course/661015

Insulating concrete form (ICF) products use a cost-effective and robust structural material option (reinforced concrete) to turn a building envelope into a high-performing thermal, moisture, and air enclosure with disaster resistance and built-in compliance with energy code requirements. As a result of ICF performance, building owners can complete a whole structure with ICFs and reinforced concrete, including intermediate suspended floors, rooftops, and multistory designs. This course examines the advancements in ICF technology and discusses the potential contribution of ICFs to supporting improved sustainability and resilience.

Controlling Legionella and Other Waterborne Pathogens in Healthcare Facilities: Plumbing Design Strategies ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s3515/www.aecdaily.com/course/1171406

Waterborne pathogens in healthcare facilities are a significant source of hospital-acquired infections (HAIs) that cause thousands of deaths every year and billions of dollars in direct healthcare costs. This course will familiarize you with waterborne pathogens found in healthcare water systems, the technical standards that manage the risk of outbreaks, and the components of a water management program (WMP). Finally, we will review the characteristics of plumbing fixtures designed to deter pathogen growth.

Cellulose Fiber: Enhancing Sustainability in Concrete ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s13218/www.aecdaily.com/course/912443

Natural fibers have been used for over 2,000 years as a method to strengthen building materials. Cellulose fiber provides an excellent alternative to traditional secondary reinforcement, reducing plastic shrinkage cracks and improving durability, impact resistance, shatter resistance, and freeze/thaw resistance without compromising the appearance or finishability of a concrete surface. This course covers the evolution of fiber, its benefits, and why it is a sustainable material.

Pitfalls and Challenges of NFPA 285 Engineering Analysis ( ~ 1 hour, 30 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s904648/www.aecdaily.com/course/1155220

Engineering analysis is a necessary tool to provide fire protection and safety for our buildings. The exponential number of wall assembly combinations and detailing of enclosure assemblies in the built environment prevent the opportunity to confirm fire performance through direct testing. This is especially true with the required investment of time, effort, and cost for larger-scale tests such as NFPA 285. Qualified fire engineering teams, in partnership with third-party labs and product manufacturers, offer the opportunity to extend successful test results beyond the tested specimen through an engineering analysis report. This presentation discusses the opportunities, challenges, and limitations present when considering the acceptance of test data extended to support substitution or modification to an assembly.

Improving Fire Door Specification and Inspection Effectiveness ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s710971/www.aecdaily.com/course/1043037

Building fires claim nearly 4,000 lives each year in the U.S. It is the responsibility of building designers to do their utmost to prevent such fires and their accompanying loss of life. Often, the difference between life and death is as simple as a fire door that functions properly. This course focuses on describing how design professionals can reinforce their ability to ensure that fire doors are specified, installed, inspected, and maintained properly and that they meet or exceed all relevant code requirements.

Composite Decking: Sustainability, Durability, and Applications ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s951401/www.aecdaily.com/course/1094326

While natural wood has traditionally been viewed as an ideal material for decking boards and tiles, wood-plastic composite (WPC) has emerged as a durable, easy-to-maintain, and sustainable alternative. This course provides insights into the advantages of composite decking, especially fully capped products, and explores topics including its environmental benefits; contribution to occupant wellness and safety; resistance to fading, staining, and other potential defects that decking experiences; various applications; and attractive aesthetics.

Commercial Design and Construction with Insulated Concrete Form (ICF) ( ~ 1 hour, 15 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s20141/www.aecdaily.com/course/925265

ICF construction is cost effective and sustainable, and is a superior way to build stronger, quieter, healthier, and more energy-efficient commercial structures. This course explores insulated concrete form (ICF) construction, describing the forms themselves and their construction, performance, and sustainable benefits. Also presented are design guidelines, the installation process, flooring systems, and commercial project applications.

Sun Control Window Films ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s614935/www.aecdaily.com/course/903662

Originally developed to reduce solar heat gain from entering through a pane of glass, window films in today’s market provide UV protection, reduce glare, reduce fading, increase occupant comfort, offer safety and security, and yield energy savings. This course evaluates the performance of different types of solar control window films and offers daylighting strategies for commercial, retail, and residential building and architectural applications.

Servicing Open Spaces with Convenient, Code-Compliant Electrical and Digital Infrastructure ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s525798/www.aecdaily.com/course/836832

The commercial space design trend toward open plans has had a major impact on interior electrical and digital infrastructure. Offices, hotels, retail spaces, and transit areas all utilize open spaces, each with their own specific issues and requirements. This course provides designers with the information required to provide code-compliant, user-friendly, and convenient power, data/communication, and AV access for a wide variety of spaces and end users, including facility managers, cleaning staff, and visitors.

The Ins & Outs of Fully Automated Parking ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s860757/www.aecdaily.com/course/879645

The availability of parking and the time it takes to park a vehicle are major challenges when designing a new development. Parking garages typically require big volumes and are not efficient with land use. Automated parking can practically reduce parking space, while providing the same (sometimes more) number of parking stalls as a conventional garage. It also improves the user experience, providing a valet parking experience, just without the valet.

IMPs, EPDs, and HPDs: Sustainable Performance ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s18795/www.aecdaily.com/course/787742

The use of sustainable materials and products during building design will become the standard within the construction industry, and environmental product declarations (EPDs) and Health Product Declarations (HPDs) help architects and owners make informed decisions for their projects. Insulated metal panels— a prime example of a sustainable product—are one of the most cost-effective solutions to reduce energy and greenhouse gases.

Universal Design: Applied to Bathroom and Kitchen ( ~ 1 hour, 15 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s8547/www.aecdaily.com/course/915899

Universal design is not a new concept; however, it is time for a paradigm shift. Considering ADA design, universal design, and living in place, should designers now be offering universal design solutions to all clients, regardless of age or ability? This course reviews both ADA and universal design guidelines and discusses compelling reasons for recommending universal design in your kitchen and bathroom projects. Various kitchen and bathroom applications are discussed in detail.

Wash Your Hands One More Time ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s795432/www.aecdaily.com/course/921739

The importance of handwashing in regard to personal health is well understood, and most people feel they know how to do it properly. However, the places where and methods by which hands are washed are not always as healthy and safe as they should or appear to be. This course outlines the proper handwashing techniques, especially for healthcare and food preparation contexts; explains how germs, viruses, and bacteria are spread and where sanitation problems with sinks may reside; and describes how to select and specify the most appropriate washup, infection prevention, and scrub sinks, countertops, and fitments.

Design with Sectional Overhead Doors for Safety and Security ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s17282/www.aecdaily.com/course/930425

Today’s sectional overhead doors are more sophisticated than ever. Options include high-strength glazing for security and insulated steel sections for increased energy efficiency and durability. Code requirements for safety in high wind-load areas, impact resistance to hurricanes, and reductions in air transmission have led to improvements in door technology and hardware. This course examines a range of safety and security options for architects to consider when designing and specifying sectional overhead doors.

The Rooftop Environment: Designing for Safe Access and Fall Protection ( ~ 1 hour, 15 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s1021711/www.aecdaily.com/course/1044026

Anytime a facility has people working on a roof, their safety and protection must be the priority. Even under the best conditions, working on a rooftop is dangerous due to the roof’s elevation, slope, and edge, as well as other hazards created by weather conditions, electricity, and power tools. This course reviews the hazards of the rooftop environment and the relevant Occupational Safety and Health Administration (OSHA) regulations to aid designers, property owners, and facility managers in selecting safe access and fall protection systems for their buildings.

Commercial Sectional Door Systems ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s15358/www.aecdaily.com/course/693296

Specifying the right sectional door system for your commercial project can have a great effect on the health, safety, and welfare of building occupants. This course covers commercial sectional door systems, including the various types of doors available and their associated characteristics including energy efficiency and durability, along with a discussion on how to specify the correct door to meet project requirements.