Newfoundland & Labrador Association of Architects

The mandate of the Newfoundland and Labrador Association of Architects is to promote and increase the knowledge, skill and proficiency of its members in all things relating to the profession of architecture; to advance and maintain a high standard in the provision of architectural services; and to promote public appreciation of architecture and the allied arts and sciences.

Click to Learn More About the Newfoundland & Labrador Association of Architects

Visit www.newfoundlandarchitects.com and Join Now!

Displaying 1 - 25 of 645 results.

FIRST [1-25] [26-50] [51-75] [76-100] [101-125] NEXT LAST

  • ( ~ 1 hour, 15 minutes ) 

    Protected roof membrane assemblies (PRMAs), and vegetative roof assemblies (VRAs) in particular, place extreme requirements on the components below the surface, from waterproofing to insulation and everything in between. Each element must meet specific standards for energy efficiency and durability. This course reviews the benefits and design considerations of VRAs. It also describes the high-performance attributes of VRA components and defines the building code/performance standards and best specification practices for optimal fire, wind, thermal, and moisture performance.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    An air curtain, also known as an air door, employs a controlled stream of air aimed across an opening to create an air seal. This seal separates different environments while allowing a smooth, unhindered flow of traffic and unobstructed vision through the opening. This course discusses how air curtains work and why they can contribute to occupant comfort, energy efficiency, and indoor air quality when the door is open. It also reviews how air curtains improve whole-building energy efficiency versus conventional methods.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    Typically, all the brick selected for a given project will be either full bed depth (anchored) or thin brick (adhered); however, situations may benefit from combining the two types of masonry veneer on a project. The intent of this course is to differentiate between the types of brick masonry veneer, discuss the unique detailing required when combining veneer types, and provide project examples demonstrating where both types of masonry veneer have been successfully integrated. This course will focus on exterior applications of anchored and adhered masonry veneer.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Cable railings are a beautifully minimalist way to meet safety requirements without obstructing the view. Learn how to assemble a commercial-grade cable railing with sophisticated fittings engineered to simplify installation, comply with building codes, and reduce overall labor costs.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Identifying, salvaging, and reusing stone and brick is a multifaceted strategy that benefits the environment, economy, and society. It represents a practical and visionary approach to building and design that respects the past, enhances the present, and prepares for a more sustainable future. This course reviews the impact of stone and brick reclamation by examining case studies focusing on modern American architecture and interior and exterior design. The course discusses how material repurposing benefits a society increasingly concerned about environmental sustainability.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Bamboo is a versatile, strong material with a warm aesthetic that suits an array of interior design styles. This course looks at how bamboo is sustainably sourced to produce low-VOC products such as flooring, cladding, and three-ply architectural wall and ceiling panels. Project examples highlight a CNC routing method that produces panels with eye-catching patterns of varying depths and levels of intricacy. The course also examines how bamboo products may apply to several credits and features in the LEED® v4.1 Building Design and Construction and Interior Design and Construction rating systems and the WELL Building Standard™ version 2.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    The diffuse light-transmitting and composite technology of translucent structural sandwich panels has increasingly caught the imagination of architects and designers because it is possible to maximize wall or roof daylighting while minimizing energy loss, with consequent savings in the running costs of heating, air conditioning, and artificial lighting. This course explores the fundamental connection between light and health by examining how translucent structural sandwich panels deliver glare-free, diffuse daylight deeper and more evenly into spaces with maximum thermal efficiency.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    The savings that water conservation measures can provide are real and practical and offer enormous untapped potential. One of the best ways to boost conservation really hasn’t been thoroughly utilized, yet it’s right here at our fingertips: faucets. This course provides an overview of commercial faucets, including the evolution of the modern faucet, design and installation considerations, and the faucet’s impact on water conservation and green building programs.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    As environmental concerns grow, repurposing materials and finding new ways to showcase their unique qualities in design have become increasingly important. This course examines terrazzo’s history, system types, flooring assemblies, and restoration and refinishing options. Discover its enduring versatility and charm through renovation projects featuring newly installed and renewed vintage floors, where its durability, material attributes, and design potential can help meet credit requirements in the LEED ® v5 Building Design and Construction and Interior Design and Construction rating systems and the WELL Building StandardTM version 2.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Single-skin metal roofing systems combine structural efficiency with verified wind, fire, and energy performance. This course examines how panel profiles, substrate metals, coatings, and fastening methods contribute to building durability and environmental performance. Learners explore industry standards, testing protocols, and detailing strategies that support code compliance and optimize long-term results. The program also addresses fabrication quality, installation practices, and warranty provisions that influence life-cycle value and alignment with green building objectives under the LEED® v4.1 Building Design and Construction rating system.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Selecting a countertop surface today, whether for a break lounge or a reception desk, means weighing the relative sustainability of the choices while considering whether the material meets the design objectives of the space. This course will help you decide whether quartz surfacing does that. We will review its performance characteristics and environmental and human health impacts, compare it to other options, and guide selection and design.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Fire safety is an important building enclosure design factor and needs to be addressed hand-in-hand with energy code requirements. NFPA 285 is a critical consideration with modern building assemblies incorporating combustible materials in noncombustible construction. This presentation reviews the history and scope of the NFPA 285 test standard and its adoption into the International Building Code® (IBC®). The compliance criteria are outlined, and triggers and contributors under the standard are identified. The course also reviews how the selection of building components such as insulation, air-/water-resistive barriers, and claddings affects the fire performance of an assembly, and solutions and common paths for compliance are presented.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Comprehensive site security design should balance managing traffic flow and preventing vehicular intrusion with enhancing the existing character of the site. This course presents FEMA’s guidance on risk assessment and layers of defense, vehicle impact test standards, bollard types, the precast concrete manufacturing process, barrier system design considerations, and incorporating precast concrete bollards and site furnishings into perimeter security design.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Louvers are functional elements that permit airflow and protect against water intrusion. Selecting the right louver for a project requires balancing multiple factors. This course provides an overview of the various types of louvers and their performance characteristics, the AMCA’s role in ensuring reliable, high-performing products, and relevant standards and testing protocols. Finish options, as well as installation, design, and structural considerations, are addressed. Guidance is provided on selecting and specifying appropriate louvers to meet project needs.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Understanding building physics is critical to proper building envelope design. Examined here are practical concepts for the building designer, including how cladding systems perform across different climate zones and applications. Environmental control layers and hygrothermal loads are reviewed, as is the concept of perfect/universal wall design. The course focuses on how single-component insulated metal panels (IMPs) function as a perfect/universal wall, simplifying wall system design and installation.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Architectural resin panels are engineered to suit the demands of a wide array of interior and exterior applications and offer almost unlimited combinations of color, pattern, and design. This course presents the features and options that allow resin panels to meet design requirements for both function and beauty and discusses how resin panels may play a role in projects seeking LEED® v4 BD+C, ID+C, and O+M; Living Building ChallengeSM v3.1; or WELL Building Standard® v1 certification.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Foam plastic insulation materials, such as spray foam and rigid foam board, gained popularity after the 1970s oil crisis as energy‑efficiency solutions. While energy efficiency remains central to building codes, expectations now also include reducing carbon emissions to support building decarbonization. This course examines the embodied carbon of insulation materials and their role in reducing operational energy use, enhancing building resilience, improving community well-being, and supporting sustainable, resource‑efficient design.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    In light of the recent pandemic and the increasing frequency of wildfires, there is growing awareness around the impact of air quality, particularly in indoor environments. Building systems that manage air circulation and ventilation play a crucial role in supporting occupant health and well-being and can help meet indoor air quality credit requirements in the LEED® v5 Building Design and Construction, Interior Design and Construction, and Operations and Maintenance rating systems and the WELL Building Standard™ version 2. This course provides an overview of indoor air quality (IAQ) and offers strategies for improving it through responsive design and technology.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Dive into the intersection of design excellence and environmental responsibility with this comprehensive course on TFL decorative panels. Explore the intrinsic value of sustainability in the design world, unravel the complexities of the carbon cycle, and uncover how forests and wood play pivotal roles in carbon sequestration. Discover the versatile applications and climate-positive attributes of TFL panels, empowering you to make informed, eco-conscious choices in your design projects. Elevate your understanding of exceptional design, durability, and sustainability, and contribute to a greener, more resilient future.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    There are many kinds of resin-based coatings for metal. The type of resin used plays an important role in determining a coating's durability and physical properties. This course discusses these coatings and their application techniques. It also discusses why the coatings may deteriorate and how to measure the performance of the coatings. The role that resin-based coatings perform in cool roofs is explored along with the standards that measure the sustainability of cool roofs. This course provides the information one needs to ensure that the coated product will perform as expected and provide a durable, long-lasting finish.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Specifying the right sectional door system for your commercial project can have a great effect on the health, safety, and welfare of building occupants. This course covers commercial sectional door systems, including the various types of doors available and their associated characteristics including energy efficiency and durability, along with a discussion on how to specify the correct door to meet project requirements.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Humidity affects numerous industries, potentially leading to building damage and health problems. Mechanical dehumidifiers play a critical role in controlling humidity across different environments, ensuring comfort and safety while preventing any humidity or condensation issues that interfere with daily business. In this course, we provide insight into the principles of psychrometrics, enabling participants to understand the properties of air and water vapor mixtures significant to moisture control. We explore the operation of mechanical (vapor compression) dehumidifiers, their performance parameters and limitations, and installation configurations. Finally, we examine some examples of beneficial applications.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Cooktops are manufactured and classified by construction type and method of heat energy transfer. This course reviews the operation, control, performance, and efficiency of induction cooktops in comparison to their gas and electric counterparts, and shows how induction cooktops can be incorporated into any kitchen design in residential and specialty-commercial applications such as marine, mobile, military, academic, institutional, and hospitality.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Infrared patio heaters sustainably increase safety and comfort in outdoor entertaining areas. There are many variables in creating ambient warmth, and the effectiveness and cost of heating an outdoor space depend on the design of the selected heating option. This course looks at the available outdoor heating options and their sustainability profiles, focusing on the types, color choices, mounting methods, and control options of electric infrared heaters. It includes a review of the steps required to select the best solution.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Creating a quieter, more comfortable building starts with a focus on windows and doors, the weakest links in the building envelope for sound transmission. This course covers the elements of sound, the metrics used to measure sound attenuation, and the glazing and installation options best suited for an effective sound control strategy.

    Ask a Question
    SAVE FOR LATER

Displaying 1 - 25 of 645 results.

FIRST [1-25] [26-50] [51-75] [76-100] [101-125] NEXT LAST