Building Knowledge and Connections
Displaying 1 - 25 of 83 results.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s390008/www.aecdaily.com/course/917446
There is an extremely wide array of coated or composite fabrics available on the market, each type formulated for specific uses and with different levels of performance and quality. To assist in the decision-making process, standards have been developed to show product performance, facilitate quality control, and assure designers that the product they are specifying is suitable for normal commercial use. This course briefly outlines the history, properties, and uses of coated fabrics, the intent and content of one coated fabric standard, and the testing protocols that support it.
https://redirect.aecdaily.com/s425610/www.aecdaily.com/course/1116104
Now more than ever, public restrooms must provide users with a hygienic and safe experience that supports inclusivity, human health, and wellness. In this course, we explore how multistall public restrooms address users’ concerns about hygiene, safety, privacy, and efficiency through partitions, touchless fixtures, hand dryers, and more. We also discuss fulfilling WELL Building Standard™ v2 requirements by promoting public health and safety in restroom design.
https://redirect.aecdaily.com/s779980/www.aecdaily.com/course/899781
While architects and designers have many choices for specifying dynamic architectural surfaces in their projects, the result of using photography in such applications has historically presented challenges. This course explores typical digital images used in glass installations, gigapixel photography, guidelines for glass transparency, and the impacts of luminosity and reflectivity. Finally, it looks at potential applications for gigapixel images in large- or small-scale architectural surfaces.
https://redirect.aecdaily.com/s731654/www.aecdaily.com/course/1195223
Contrast therapy, the controlled use of heat and cold, has supported health, recovery, and wellness practices for centuries. This course examines the science, design, and construction of modern contrast therapy environments, including saunas, steam rooms, and cold rooms. It explains how temperature control, material specification, and system design influence safety, hygiene, and performance. The course also addresses how prefabricated systems improve installation efficiency, durability, and indoor environmental quality.
https://redirect.aecdaily.com/s865150/www.aecdaily.com/course/1039451
When deciding on outdoor cabinetry, understanding the available material options is essential to the selection of a long-lasting, sustainable choice. This course reviews the pros and cons of these options, with a focus on the attributes, sustainability, and performance characteristics of marine-grade high-density polyethylene (HDPE) material, engineered to withstand extreme conditions while maintaining optimal structural integrity.
https://redirect.aecdaily.com/s12219/www.aecdaily.com/course/1062036
Modular systems are designed around individual components that can be joined together to configure a seamless and personalized space solution. This course discusses the key design principles and benefits of modular design along with strategies for successfully incorporating modularity into a bathroom design.
https://redirect.aecdaily.com/s801701/www.aecdaily.com/course/1221873
In the post-COVID work environment, businesses and designers are attempting to leverage daylight to the benefit of employees, students, patients, and caregivers alike. Automated shading enhances all manner of built environments by controlling and managing natural light to benefit mental health, productivity, and the bottom line. This course explores how using Power over Ethernet (PoE) based automated shading solutions supports smart buildings and enhances the well-being of occupants, regardless of building type or use. Also addressed is how automated shading can contribute toward the credit requirements of the LEED® v5 Building Design and Construction and Interior Design and Construction rating systems and the WELL Building Standard™ v2.
https://redirect.aecdaily.com/s892132/www.aecdaily.com/course/984450
Modern security bollards are highly engineered and tested devices that can withstand deliberate ramming by a 15,000 lb vehicle. Bollards are more than decorative boundary markers; they are an essential tool to protect lives and property. This course explains bollard crash testing standards, reviews the pros and cons of available bollard materials, and discusses steel bollard designs for low- and high-impact applications.
https://redirect.aecdaily.com/s777575/www.aecdaily.com/course/788434
Architectural resin panels are engineered to suit the demands of a wide array of interior and exterior applications and offer almost unlimited combinations of color, pattern, and design. This course presents the features and options that allow resin panels to meet design requirements for both function and beauty and discusses how resin panels may play a role in projects seeking LEED® v4 BD+C, ID+C, and O+M; Living Building ChallengeSM v3.1; or WELL Building Standard® v1 certification.
https://redirect.aecdaily.com/s1082406/www.aecdaily.com/course/1111937
This course delves into the increasing and expanding role of outdoor living and its importance in households, businesses, and communities. Reviewed are the styles and specification considerations of aluminum shading products. The focus is pergolas and cabanas made with dual-walled aluminum louvers that seal completely to block rain and snow and complement any architectural style.
https://redirect.aecdaily.com/s1052525/www.aecdaily.com/course/1087814
Natural and artificial lighting surrounds us at all times. Light helps us to work safely, enhances design, creates atmosphere, and influences our well-being. This course discusses the circadian rhythm, occupant health, and lighting color temperature, and it examines LED lighting requirements and options for lighting-integrated bathroom mirrors and cabinets.
https://redirect.aecdaily.com/s5712/www.aecdaily.com/course/1136257
This course explores a 5,000-square-foot office expansion recently completed by Excel Dryer. The building owner was committed to reducing their environmental impact and building a beautiful, healthy, sustainable, and functional space. This course discusses the relevant tools for sustainable, healthy buildings, including the WELL Building Standard™ version 2 and the LEED® v4.1 Building Design and Construction rating system. The methods for achieving these goals are examined through various building products and systems: walls, furniture, HVAC, sound masking and acoustic systems, flooring, daylighting and solar shading, and plumbing.
https://redirect.aecdaily.com/s15612/www.aecdaily.com/course/1029637
Solid surface is a popular material choice due to its beauty, durability, and ease of cleaning. Selecting a solid surface depends on the manufacturing process, the raw materials involved, and the material’s sustainability. This course examines solid surface as a decorative material, discusses its characteristics and attributes, and compares it with other hard surface materials
https://redirect.aecdaily.com/s661112/www.aecdaily.com/course/880724
Due to advancements in architectural decorative glass technology, the number of design options available to help designers and architects achieve the specific aesthetics and performance requirements they desire has dramatically increased. This course provides a review of architectural decorative glass including product options, applications, features, and specification considerations. Also discussed is how decorative glass can contribute to sustainable design and LEED® initiatives.
https://redirect.aecdaily.com/s2955/www.aecdaily.com/course/931279
The purpose of this course is to provide an introduction to the use of entrance floor systems in commercial buildings in order to promote a safe and clean environment. The course explains the codes, regulations, and guidelines specifically related to entrance flooring systems for high-traffic entrances in healthcare, education, transportation, corporate, and other commercial settings.
https://redirect.aecdaily.com/s8279/www.aecdaily.com/course/875279
While the bathroom was once a strictly utilitarian space, a growing trend among luxury consumers is to create a custom, spa-like wellness retreat right in the home. Surveys find that luxury consumers value functional and design excellence, uniqueness that reflects a creative side, and exceptional quality and value. This course examines the shower products available that help to create a personalized, multisensory wellness experience with beautifully designed pieces that meet water efficiency standards.
https://redirect.aecdaily.com/s15612/www.aecdaily.com/course/1007626
High-performance waterproof panels are engineered to mitigate moisture damage in areas where water is ever present while offering easy installation and lasting beauty. This course reviews the importance of moisture management in wet applications and examines the performance attributes of waterproof panels that make them a complete wall solution.
https://redirect.aecdaily.com/s707030/www.aecdaily.com/course/1138092
Light-manipulating glass products transport, redirect, refract, and reflect light to create architectural spaces that engage occupants with the unexpected interplay of light and shadow. This course explores these durable, functional products and their many options for customization. Also reviewed is how glass panels may apply to several credits and features in the LEED® v4.1 Building Design and Construction and Interior Design and Construction rating systems and the WELL Building Standard™ version 2.
https://redirect.aecdaily.com/s1078641/www.aecdaily.com/course/1083536
Selecting a countertop surface today, whether for a break lounge or a reception desk, means weighing the relative sustainability of the choices while considering whether the material meets the design objectives of the space. This course will help you decide whether quartz surfacing does that. We will review its performance characteristics and environmental and human health impacts, compare it to other options, and guide selection and design.
https://redirect.aecdaily.com/s14723/www.aecdaily.com/course/1212626
Kitchens have evolved significantly over time, and so has the role of refrigeration in the home; a variety of factors are contributing to this change. This course explores the social, economic, and demographic trends that are reshaping kitchen spaces. It also discusses the latest kitchen design trends and highlights modular refrigeration as a key design element in creating functional spaces that reflect the changing dynamics of modern households.
https://redirect.aecdaily.com/s779980/www.aecdaily.com/course/901445
Architects and designers have many options for specifying site furniture products for their projects. Selecting materials and finishes is an integral part of this process, yet making material selections has become more and more complex. The course examines conditions and constraints of outdoor environments; evaluates materials commonly used in outdoor applications; discusses using green building standards and rating systems, and the role of suppliers as resources for material selection; and provides examples of products that adhere to a higher environmental standard.
https://redirect.aecdaily.com/s15612/www.aecdaily.com/course/893839
Quartz surfacing is a man-made material consisting of up to 93% natural quartz crystal. In this course, you will discover the other components behind the beauty, durability, and flexibility of this surfacing material. You will see the composition, production, and quality assurance processes that go into making the material and the resultant attributes and capabilities, as well as the installation basics of quartz surfacing materials.
https://redirect.aecdaily.com/s643819/www.aecdaily.com/course/1059013
Places of public accommodation and commercial facilities in the U.S. must follow the Americans with Disabilities Act (ADA) requirements regarding many facets of design and landscaping, including site furnishings. This course reviews ADA requirements for tables and benches and the benefits to communities, people, and businesses of creating accessible outdoor seating areas for all to enjoy.
https://redirect.aecdaily.com/s1101245/www.aecdaily.com/course/1111000
Incorporating sustainable building materials into design practices is essential for creating environmentally responsible, healthy, and resilient built environments. Thermal modification is a tested and proven chemical-free process for increasing the dimensional stability and long-term performance of wood while preserving its natural beauty. Presented are the thermal modification process, the attributes, applications, and favorable environmental impacts of thermally modified wood, and how thermally modified wood can contribute to achieving certification in LEED® v4.1 Building Design and Construction and Interior Design and Construction, Sustainable SITES Initiative® v2, the WELL Building Standard™ version 2, and the Living Building Challenge (LBC).
https://redirect.aecdaily.com/s741679/www.aecdaily.com/course/764404
With the increasing prominence of glass in new buildings and retrofits, the use of window film can raise the style, performance, and safety of today’s building projects. This course examines the use of various types of window film (decorative, solar control, and safety/security) and their role in improving occupant comfort and safety, lowering energy costs, and enhancing privacy.
🍪 We use cookies to offer you a better browsing experience, analyze site traffic, personalize content, and serve targeted advertisements. Read about how we use cookies and how you can control them by clicking here. Click "cookie settings" to adjust your preferences.
