Building Knowledge and Connections
Displaying 1 - 25 of 51 results.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s1131176/www.aecdaily.com/course/1148652
This course explores insulating concrete forms (ICFs) as part of a sustainable construction system by covering their benefits, applications, and design considerations. The course delves into the structural properties, energy efficiency, and environmental impact of ICFs. Also presented are best practices for integrating ICFs into various architectural projects and a concise overview of installation steps.
https://redirect.aecdaily.com/s13218/www.aecdaily.com/course/839272
Concrete is often the substrate for both new and existing floors. Transforming the surface into a finished floor is far more sustainable than consuming additional flooring materials, adhesives, and transportation-related energy to install a floor covering. This course discusses the stages and options of the concrete polishing process, recognizes benefits of recent advances in concrete densification chemistry, and provides an overview of the limitations and possibilities for concrete floor finishes.
https://redirect.aecdaily.com/s677063/www.aecdaily.com/course/897991
It is an expectation that today’s buildings have to be more than just aesthetically pleasing: they have to provide measurable environmental benefits. This course outlines how insulated concrete forms (ICFs) help meet sustainable design objectives and examines the advantages that ICFs and ICF technology have over conventional construction materials for building envelopes in all building types.
https://redirect.aecdaily.com/s1041685/www.aecdaily.com/course/1048034
This presentation aims to aid architects, engineers, and specification writers in choosing anchoring systems to comply with the 2022 edition of The Masonry Society’s (TMS) TMS 402 Building Code Requirements for Masonry Structures and the International Building Code® (IBC®).
https://redirect.aecdaily.com/s987165/www.aecdaily.com/course/1043405
Wind forces always influence building design and detailing. This course focuses on one particular force, wind uplift, and its influence on roof paving system design and selection. It examines how wind loads and building configuration affect the design of roof paving systems; the codes, regulations, and calculation approaches that inform and control such designs; and the various options designers can use to design safe, appealing outdoor roof paving systems that will withstand even the strongest winds.
https://redirect.aecdaily.com/s549530/www.aecdaily.com/course/563571
Stairs are an essential component of a movement and wayfinding strategy in a structure and a primary means of egress, exit, and floor-to-floor access in the event of a fire or emergency for buildings with multiple floors or a change in rise. This course discusses stair and egress system design and evaluates why the design and fabrication of pre-engineered steel stairs create safe stair environments that comply with building codes.
https://redirect.aecdaily.com/s561226/www.aecdaily.com/course/999984
Masonry is an ideal sustainable building construction material as it is extremely durable, recyclable, and reusable. It allows for extraordinary design versatility, so it can meet both aesthetic and functional requirements. This course looks at the design elements, components, and construction techniques that characterize sustainable masonry cavity wall building envelopes.
https://redirect.aecdaily.com/s671/www.aecdaily.com/course/980729
Building science experts have acknowledged the need for both drainage and ventilation in exterior wall systems in order to eliminate moisture issues and extend the life of buildings. This presentation reviews the concepts of rainscreen technology and the solutions for compliance with a focus on engineered rainscreen drainage and ventilation mats used in direct-applied and ventilated wall designs. Prerequisites: No Course Level: Introductory
https://redirect.aecdaily.com/s14229/www.aecdaily.com/course/1174090
As environmental concerns grow, repurposing materials and finding new ways to showcase their unique qualities in design have become increasingly important. This course examines terrazzo’s history, system types, flooring assemblies, and restoration and refinishing options. Discover its enduring versatility and charm through renovation projects featuring newly installed and renewed vintage floors, where its durability, material attributes, and design potential can help meet credit requirements in the LEED ® v5 Building Design and Construction and Interior Design and Construction rating systems and the WELL Building StandardTM version 2.
https://redirect.aecdaily.com/s686798/www.aecdaily.com/course/884142
Ensuring proper use of methods and materials allows masonry walls to perform well and enjoy a long life. Use of masonry joint reinforcement and accessories is an essential part of this. This course provides a brief history of solid masonry walls leading up to the modern cavity walls of today, including a discussion of the basic working knowledge of masonry joint reinforcing, structural codes, and moisture control in cavity wall construction.
https://redirect.aecdaily.com/s7816/www.aecdaily.com/course/1166505
Segmental retaining walls (SRWs) are used in many landscaping applications, including small residential backyards and large commercial and transportation situations. This course provides an overview of segmental retaining wall systems and materials, including SRW terminology, soils, geosynthetics, general uses, and potential site issues. This program is best suited for those with little to no background in segmental retaining wall systems or materials or those desiring a refresher course in segmental retaining walls.
https://redirect.aecdaily.com/s877426/www.aecdaily.com/course/904671
The need to evaluate thermal bridging in a building’s design and performance has become more prevalent because of the increasing requirements for more energy-efficient buildings. This course provides an introduction to thermal bridging, energy code requirements, and the use of thermal break solutions designed to improve energy efficiency in the building envelope.
https://redirect.aecdaily.com/s7816/www.aecdaily.com/course/1178510
Concrete masonry units (CMUs) are made from dry-cast concrete, which uses less cement and sequesters carbon at a faster and greater rate than wet-cast concrete. This course begins with an overview of concrete products and the differences between dry- and wet-cast concrete, then explores the relationship between concrete and the carbon cycle, recent research into CMU sequestration rates, and the results of mini life-cycle assessments comparing different wall systems. Finally, some practical strategies for further reducing embodied carbon are reviewed.
https://redirect.aecdaily.com/s806330/www.aecdaily.com/course/827398
Vacuum insulation panels (VIPs) offer higher thermal resistance per unit thickness than traditional insulation materials. This means a building envelope can meet the effective R-values for enclosures required by the energy codes without having to increase the thickness of the walls, roof, or floors. This course discusses how VIPs work, why they are effective, and the impact the properties of the materials used to construct a VIP can have on its performance. VIP installations and the latest developments in VIP technology are reviewed to illustrate the advantages of using VIPs as thermal insulation in the design of energy-efficient buildings.
https://redirect.aecdaily.com/s1116216/www.aecdaily.com/course/1130624
Identifying, salvaging, and reusing stone and brick is a multifaceted strategy that benefits the environment, economy, and society. It represents a practical and visionary approach to building and design that respects the past, enhances the present, and prepares for a more sustainable future. This course reviews the impact of stone and brick reclamation by examining case studies focusing on modern American architecture and interior and exterior design. The course discusses how material repurposing benefits a society increasingly concerned about environmental sustainability.
https://redirect.aecdaily.com/s686798/www.aecdaily.com/course/1228560
Masonry through-wall flashing plays an important role in cavity wall construction by directing water to designated drainage paths. This course explains how flashing interfaces with masonry veneer, air and vapor control layers, insulation, and weep systems to promote effective drainage and protect wall components from moisture exposure. It reviews common flashing materials, accessory components, and required flashing locations, then connects these elements to detailing and specification decisions that affect wall performance over time.
https://redirect.aecdaily.com/s10541/www.aecdaily.com/course/1012800
Masonry wall types have evolved from self-supporting mass walls to cavity walls and veneers that require wall ties or anchors. Over time, anchors can fail and masonry wall systems can become unstable and require repair. This course discusses how to recognize unstable façades, how retrofit anchors can be used to repair these instabilities, the different types of anchors available, and how to determine the proper repair procedure.
https://redirect.aecdaily.com/s789181/www.aecdaily.com/course/990198
Concrete is an essential part of modern buildings. As net zero energy buildings become more common, it is crucial to find ways to reduce concrete’s carbon footprint without losing the performance characteristics that make it valuable to the building team. This course explains the sources of concrete’s carbon footprint and explores strategies for reducing embodied carbon and operational carbon in precast sandwich wall panels and insulated architectural cladding.
https://redirect.aecdaily.com/s420795/www.aecdaily.com/course/874439
The construction of residential and commercial buildings that use less energy to operate and are long lived is a key part of sustainable design. Insulated concrete forms (ICFs) provide the necessary U-factor, airtightness, resiliency, and durability for all building types. Insulated concrete forms in residential and commercial construction projects offer excellent thermal performance and reduced energy consumption and operating costs, while maintaining a very comfortable and healthy interior environment. This course examines the ICF wall, including materials and components, and discusses design considerations and construction.
https://redirect.aecdaily.com/s13907/www.aecdaily.com/course/903646
Concrete-faced insulated products are composite prefinished panels that are used to construct walls and roofing assemblies to maximize the energy efficiency, durability, and performance of a building envelope. This course discusses the design criteria used in designing energy-efficient buildings using concrete-faced continuous insulation systems for low-slope roofing, walls, and foundations. The functional and physical features of protective membrane roof (PMR) systems, concrete-faced insulated panels for walls and foundations, and concrete structural insulated panels (CSIPs) are evaluated.
https://redirect.aecdaily.com/s1203/www.aecdaily.com/course/1185008
Terracotta rainscreen cladding systems enhance building envelope performance through improved moisture management, reflected in the WELL Building Standard™ version 2, as well as through energy efficiency, structural integrity, and durability. The course examines the manufacturing of terracotta cladding, highlighting responsible clay sourcing and postextraction site reclamation, and discusses performance, aesthetics, and sustainability benefits, including how terracotta cladding can contribute to meeting the requirements of LEED® v5 Building Design and Construction (BD+C): New Construction. Additional topics include system color, layout, and wall assembly options, best installation practices, and industry standards and tests.
https://redirect.aecdaily.com/s1009358/www.aecdaily.com/course/1034437
Paint in its various forms is an older material whose composition has constantly evolved, even in modern times. This evolution has included the identification and removal of certain hazardous ingredients. Similarly, paint removers have also evolved and improved their ability to deal with a wide range of old and new paint formulas while remaining safe for the occupant, the worker, and the environment at large. This course examines state-of-the-art nontoxic paint removers that are effective in removing as many as thirty coats of paint in one safe and efficient operation.
https://redirect.aecdaily.com/s624574/www.aecdaily.com/course/1056832
Typically, all the brick selected for a given project will be either full bed depth (anchored) or thin brick (adhered); however, situations may benefit from combining the two types of masonry veneer on a project. The intent of this course is to differentiate between the types of brick masonry veneer, discuss the unique detailing required when combining veneer types, and provide project examples demonstrating where both types of masonry veneer have been successfully integrated. This course will focus on exterior applications of anchored and adhered masonry veneer.
https://redirect.aecdaily.com/s456403/www.aecdaily.com/course/835024
Stairs are often a prominent feature or even the focal point of an architectural design project and play a vital role in creating an aesthetically pleasing interior atmosphere, or an exterior welcoming point to a residential, commercial, or industrial building. This course provides an overview of the many benefits of installing precast concrete stair treads and landings, how to detail and specify them, and how to address related building code, design, and construction requirements.
https://redirect.aecdaily.com/s2426/www.aecdaily.com/course/661015
Insulating concrete form (ICF) products use a cost-effective and robust structural material option (reinforced concrete) to turn a building envelope into a high-performing thermal, moisture, and air enclosure with disaster resistance and built-in compliance with energy code requirements. As a result of ICF performance, building owners can complete a whole structure with ICFs and reinforced concrete, including intermediate suspended floors, rooftops, and multistory designs. This course examines the advancements in ICF technology and discusses the potential contribution of ICFs to supporting improved sustainability and resilience.
🍪 We use cookies to offer you a better browsing experience, analyze site traffic, personalize content, and serve targeted advertisements. Read about how we use cookies and how you can control them by clicking here. Click "cookie settings" to adjust your preferences.
