Hygienic Hydration: Past, Present, and Future ( ~ 1 hour, 15 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s795432/www.aecdaily.com/course/957482

Contemporary drinking fountains, water coolers, and water bottle refilling stations provide communities with access to safe, clean drinking water. This course recounts the history of the drinking fountain and addresses regulations surrounding drinking water distribution and treatment. It introduces touchless activation, compares the use of bottled water to bottle refillers, and provides guidelines for specifying commercial water delivery systems.

Electric Vehicle Charging: Basics and Beyond ( ~ 1 hour, 15 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s701406/www.aecdaily.com/course/858594

The growth of EV (electric vehicle) adoption is accelerating and the behavior of EV drivers is increasing the demand for electric vehicle charging stations. This education course explains the different types of charging available and their suitable applications, and discusses the planning and installation considerations for electric vehicle supply equipment (EVSE).

Understanding the Art of Quartz ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s976306/www.aecdaily.com/course/985229

Made from one of the hardest and most abundant minerals in nature, engineered quartz is a beautiful, durable surface solution for a wide range of commercial and residential applications desiring the beauty of natural stone without its drawbacks. The raw materials of quartz surfacing are harvested from the Earth and formed into slabs via an innovative production process, resulting in a homogenous, nonporous material with superior performance and low maintenance requirements. Reviewed in this course are the features, fabrication guidelines, and design trends of quartz surfacing.

Rainscreen and Ventilation Solutions for Healthy Walls ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s561226/www.aecdaily.com/course/1126989

The construction industry has experienced a significant increase in moisture-related problems in exterior walls. This presentation explains how a rainscreen wall system prevents moisture accumulation within walls by providing a means for drainage and ventilation, thereby prolonging the life of buildings. Discussion topics include air and moisture movement in the building envelope, building code and water-resistive barriers, and stucco and thin veneers in rainscreen systems.

FRP Entrances: The Science Behind the Door ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s1034450/www.aecdaily.com/course/1060033

Some building parts may see minimal human contact or weathering. Doors and entryways, however, need to be able to stand up to heavy use, frequent direct contact from building occupants, and environmental impacts. In this regard, FRP doors and frames offer robust strength, reliability, and durability. They provide project versatility and customization in colors and textures, are excellent thermal insulators, and allow for easier installation and lower costs in construction projects. This course outlines the FRP door and frame components, manufacturing methods, and types and discusses the benefits of FRP products.

Commercial Restroom Design to Promote Safety, Sustainability, and Savings: Hand Hygiene Support and Beyond ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s5712/www.aecdaily.com/course/1006374

Now more than ever, architects and designers of commercial restroom facilities are responsible for meeting or exceeding guest and employee expectations for safety and cleanliness. Presented here are touchless fixtures for public restrooms, how restrooms affect sustainability goals, and the benefits of taking cost-saving measures.

Water Management Solutions for Shower Installations ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s13907/www.aecdaily.com/course/907639

From fashion to function, the shower space of the bathroom is a focal point, offering a place of quiet respite for rejuvenation. Shower spaces should be built to last, using durable materials combined with sound installation practices in order to reduce life cycle and replacement costs. This course outlines the criteria used in designing water management systems for shower pans and walls and includes discussions on traditional and modern methods of waterproofing shower floors and walls, new methods of construction, and the innovative design options that are available for curbless shower pans.

Anti-Slip Stair Products: Solutions for Enhanced Safety ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s15743/www.aecdaily.com/course/1152629

Stairs are an important component in buildings, facilitating traffic flow and serving as a means of egress in emergencies. They can also pose a safety risk if not designed and outfitted properly. In this course, we address the safety aspects of stair design and specification, providing an overview of anti-slip products for new and existing stairways. Also discussed are the various codes and standards related to stair design and photoluminescent egress path markings and the available solutions to ensure code compliance and the subsequent well-being of users. Finally, we look at installation and anchorage options.

Beauty from Waste: A Circular Economy Case Study ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s8547/www.aecdaily.com/course/1109758

The United Nations has set 2030 as the deadline for member nations to achieve the 17 Sustainable Development Goals. The construction industry has set complementary goals, including the AIA 2030 Commitment to reach net zero emissions in the built environment by 2030. This course discusses how circular economy building products are necessary to achieve sustainable design goals and presents the case study of Kohler WasteLAB, a small manufacturing business within Kohler Company that creates beautiful products for the home from waste.

Spray Foam Sustainability Through Modern Applications ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s4732/www.aecdaily.com/course/1143570

The building envelope is the physical separator between the conditioned and unconditioned environment of a building and provides resistance to air, water, heat, light, and noise transfer. As a thermal barrier, spray polyurethane foam (SPF) offers numerous opportunities to contribute to building envelope performance and indoor air quality in several project types. This course presents the sustainable aspects of SPF, SPF fire and strength testing, and the benefits of SPF in below- and above-grade and rooftop applications.

Vegetative & Protected Roof Membrane Assemblies: What Lies Beneath ( ~ 1 hour, 15 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s5023/www.aecdaily.com/course/1009062

Protected roof membrane assemblies (PRMAs), and vegetative roof assemblies (VRAs) in particular, place extreme requirements on the components below the surface, from waterproofing to insulation and everything in between. Each element must meet specific standards for energy efficiency and durability. This course reviews the benefits and design considerations of VRAs. It also describes the high-performance attributes of VRA components and defines the building code/performance standards and best specification practices for optimal fire, wind, thermal, and moisture performance.

Furniture Power for the Hospitality Market ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s525798/www.aecdaily.com/course/1017988

Power and charging requirements for hospitality facilities are changing radically and rapidly. This course examines the options for and benefits of supplying power and charging outlets in walls, furniture, headboards, nightstands, public seating, and public gathering spaces, including outdoor areas, as well as the applicable codes for furniture-based power outlets. The course concludes with an overview of the benefits of occupancy sensors and auto-off switches in guest rooms and the installation requirements to comply with energy and electrical codes.

Carbon Leadership Forum Series: Embodied Carbon Transparency and Disclosure ( ~ 15 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s18122/www.aecdaily.com/course/983367

Policies targeting the reduction of carbon emissions associated with building products require the disclosure of embodied carbon data to inform those policies and verify whether reduction targets or incentive requirements have been met. This course aims to provide a guide to collecting high-quality embodied carbon data.

Premanufactured Perimeter Roof Edge Systems: Selection Considerations and Code Compliance ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s5533/www.aecdaily.com/course/1121832

Wind load can significantly impact buildings, affecting their structural integrity and safety. Perimeter roof edge systems are a primary safeguard during strong wind events. This course provides an overview of the types, features, and benefits of perimeter roof edge systems, system selection considerations, the impact of wind uplift on roofs, and the building codes and testing standards applicable to perimeter roof edge systems.

Universal & Sustainable: Green Hand Drying for All Abilities ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s485236/www.aecdaily.com/course/656814

“Sustainable” design isn’t just “environmental.” It’s design that works for and contributes to the health and welfare of all individuals as well as the planet, now and in the future. This course looks at hand dryers as part of sustainably designed restrooms and discusses how air knife hand dryers benefit the environment through energy efficiency, resource conservation, and waste reduction, and benefit all members of society by meeting ADA requirements and Universal Design principles.

Two-Hour Fire-Resistance-Rated Walls ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s379494/www.aecdaily.com/course/391748

Single-family attached residences (residences that share one or more walls between neighbors) are required to utilize area separation walls between units. A key design criterion of any firewall—besides its fire rating—is that it be structurally independent in a fire. This course evaluates two-hour fire-resistance-rated walls used in single-family attached and multifamily residential construction, the options available in today’s marketplace, firewall installation requirements, and fire-resistance testing.

The Solar-Plus-Storage Ecosystem ( ~ 1 hour, 15 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s1092062/www.aecdaily.com/course/1134323

Residential solar power generates clean energy, reduces carbon footprint, protects against rising electricity rates, and protects property from outages, but it is only effective during daylight hours. Adding battery storage to a solar system—called solar plus storage—removes this limitation and moves a home closer to energy independence. In this course, we will review the components of a solar-plus-storage system, including selection considerations for residential rooftop solar and DC-coupled solar batteries. The course also reviews the extended system of monitoring and DC charging.

Safety and Sustainability: Preventing Wildfires with Safe Chemistry ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s1081629/www.aecdaily.com/course/1106239

Wildfires are becoming more common and severe, posing a significant threat to communities worldwide. Architects and the building industry must adopt a proactive approach to address this issue. In this course, we explore innovative and eco-friendly wildfire defense systems, which can play a vital role in protecting our communities and the environment from the harmful effects of wildfires and addressing the current home insurance crisis.

Acoustics in Learning Environments ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s14798/www.aecdaily.com/course/1056815

Undesirable acoustics in educational spaces adversely affect the learning and teaching processes. The impact on students’ academic achievement, social adaptation, and mental health can be profound and long lasting. This course examines the impact of different sound problems and presents solutions that create synergy between the architecture and the classroom environment to optimize student learning and engagement and teacher retention.

Louver Design & Performance: From Basic to Extreme ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s12454/www.aecdaily.com/course/900566

While providing fresh air intake and exhaust, reducing noise, and keeping out unwanted water and debris, louvers can also provide architectural style to a building design. This course discusses the aesthetics, performance, and weather resistance features of a variety of louver designs from the basic to the extreme. A discussion about the industry standards and test protocols for louver performance is included.

Pitfalls and Challenges of NFPA 285 Engineering Analysis ( ~ 1 hour, 30 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s904648/www.aecdaily.com/course/1155220

Engineering analysis is a necessary tool to provide fire protection and safety for our buildings. The exponential number of wall assembly combinations and detailing of enclosure assemblies in the built environment prevent the opportunity to confirm fire performance through direct testing. This is especially true with the required investment of time, effort, and cost for larger-scale tests such as NFPA 285. Qualified fire engineering teams, in partnership with third-party labs and product manufacturers, offer the opportunity to extend successful test results beyond the tested specimen through an engineering analysis report. This presentation discusses the opportunities, challenges, and limitations present when considering the acceptance of test data extended to support substitution or modification to an assembly.

Precious Metals in Luxury Kitchens and Baths ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s610566/www.aecdaily.com/course/1061215

Precious metals are valued for their beauty, durability, scarcity, and workability. This course explores the history, symbolism, and characteristics of precious metals and how to use them in modern luxury bath and kitchen design.

Glass Fiber Reinforced Concrete (GFRC) ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s707154/www.aecdaily.com/course/969691

Throughout history, concrete mixes and carved natural stone have combined to create substance, beauty, and longevity in our architecture. Glass fiber reinforced concrete (GFRC) was created to ensure that the attributes of concrete and stone continue to be enjoyed but with efficiency in the application that is expected in today's world of design. This course covers the creation of GFRC, its components, fabrication, applications, and design capabilities. It compares GFRC to other types of architectural concrete and presents GFRC performance and sustainable design advantages.

Wine & Food Preservation: Maximizing Quality & Shelf Life with Modern Refrigeration ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s14723/www.aecdaily.com/course/1000185

Food and wine preservation refers to the process of storing products under ideal conditions in order to maximize longevity. Preserving food and wine maximizes its shelf life and flavor which, in turn, enhances the enjoyment of its consumption. Additionally, proper preservation results in less waste and saves the consumer money. This course reviews the causes of premature food deterioration, the optimal conditions for storing wine and food, and the solutions that are available with a focus on modern refrigeration units.

Thermal Bridging & Thermal Break Solutions ( ~ 1 hour, 15 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s877426/www.aecdaily.com/course/904671

The need to evaluate thermal bridging in a building’s design and performance has become more prevalent because of the increasing requirements for more energy-efficient buildings. This course provides an introduction to thermal bridging, energy code requirements, and the use of thermal break solutions designed to improve energy efficiency in the building envelope.