Building Knowledge and Connections
This page is deprecated. You are probably looking for the Latest Releases page.
Displaying 75 - 99 of 625 results.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s1131169/www.aecdaily.com/course/1162380
Kitchen and bathroom sinks serve as both functional necessities and design focal points, seamlessly integrating into a variety of architectural styles and design visions. Participants will explore sink materials and design considerations to enhance safety, sustainability, accessibility, and user experience. The course provides an overview of commercial and residential applications and trends and strategies for incorporating sinks into building design.
https://redirect.aecdaily.com/s1191391/www.aecdaily.com/course/1217280
This course explores remote transaction systems, such as deal drawers, pneumatic tubes, and track carriers, with an emphasis on applications in retail, banking, pharmacy, and other drive-thru settings. Learners examine key design considerations, product selection, and specification strategies, including how these factors enhance security, efficiency, and customer experience. The course also illustrates how coordination among architectural, operational, and safety requirements supports reliable operations, smooth installation, and long-term system performance.
https://redirect.aecdaily.com/s1202729/www.aecdaily.com/course/1215756
Polyvinyl fluoride (PVF) wallcoverings are used in commercial interiors for their durability and long‑term performance in demanding environments. This course examines how PVF functions in high‑traffic settings, including hospitality, healthcare, retail, restaurants, and multifamily applications, where surface resilience is a key consideration. The course also evaluates wallcoverings designed to resist wear and microbial growth, supporting hygienic conditions and consistent design performance in demanding applications, and possible contributions toward LEED® v5 Building Design and Construction and Interior Design and Construction rating systems and the WELL Building Standard™ v2.
https://redirect.aecdaily.com/s12474/www.aecdaily.com/course/926173
In commercial, industrial, and parking structures, it is important to use doors that can provide speed, safety, separation, and security. High-performance roll-up doors provide all these elements better than conventional doors. This course provides an in-depth discussion of the different types of high-performance doors—fabric, rigid, and rubber—along with their benefits and functions in different applications. The design and installation considerations for using these doors are also discussed.
https://redirect.aecdaily.com/s12474/www.aecdaily.com/course/967494
In food and beverage, food processing/distribution, and cold storage facilities, it is important to use doors that can provide speed, safety, separation, and security. High-speed, high-cycle, roll-up doors provide all these elements better than conventional doors. This course provides an in-depth discussion of the different types of high-performance doors—fabric, rigid, and rubber—along with their benefits and functions in different applications. The specification criteria, design, and installation considerations for high-performance doors are also discussed.
https://redirect.aecdaily.com/s661094/www.aecdaily.com/course/686311
Assesses the urban environmental issues of stormwater runoff and heat islands and describes how their damaging impacts can be mitigated by blue, white, and green roofs. The considerations and additional benefits of each roof type are also discussed.
https://redirect.aecdaily.com/s1157850/www.aecdaily.com/course/1177307
Fire doors have one mission: to compartmentalize a building to contain a fire. Choosing the right one for your application requires understanding the various types of doors and how they function. This course provides an overview of rolling steel fire doors, covering their components, design, mounting methods, and considerations for specification and installation.
https://redirect.aecdaily.com/s1157850/www.aecdaily.com/course/1177647
Choosing the best rolling door or commercial sectional door solution for an application can be challenging, so understanding the benefits of each type of door is essential to ensure the correct product is specified. This course covers the components, installation requirements, optional safety features, and design options for both types of doors.
https://redirect.aecdaily.com/s1608/www.aecdaily.com/course/903341
Ventilation grilles influence HVAC system performance but can pose aesthetic challenges for designers. Custom grilles made with modern fabrication techniques employ a variety of materials and finishes to create solutions that enhance and fully integrate with architectural interiors. This course discusses the basic mechanics of effective air distribution in buildings, performance characteristics of grilles, grille types, and custom design options.
https://redirect.aecdaily.com/s2356/www.aecdaily.com/course/893368
An air curtain, also known as an air door, employs a controlled stream of air aimed across an opening to create an air seal. This seal separates different environments while allowing a smooth, unhindered flow of traffic and unobstructed vision through the opening. This course discusses how air curtains work and why they can contribute to occupant comfort, energy efficiency, and indoor air quality when the door is open. It also reviews how air curtains improve whole-building energy efficiency versus conventional methods.
https://redirect.aecdaily.com/s2356/www.aecdaily.com/course/957597
Main entrance air curtains are used by architects and engineers in commercial, institutional, and industrial settings to both improve energy efficiency and protect occupant comfort and well-being. This course reviews the research that led to air curtains being approved as an alternative to vestibules in ASHRAE 90.1-2019 and other building codes, as well as how air curtains on main entries contribute to sustainability goals around energy conservation, public health, and indoor air quality.
https://redirect.aecdaily.com/s2451/www.aecdaily.com/course/923199
Birds, bird droppings, and nesting materials can detract from buildings' architectural features; more importantly, they can negatively impact the environment by creating health and safety risks. Eliminating a bird problem requires a strategic combination of preventive measures and proven bird control products. This course explores the characteristics of common birds, bird problem assessment, and the solutions designed to deter the roosting and nesting of pest birds.
https://redirect.aecdaily.com/s5023/www.aecdaily.com/course/899778
Insulation can help increase overall energy efficiency, minimize the spread of fire, manage risks associated with moisture and mold, and improve occupant comfort. Choosing the right insulation and putting it in the right location is becoming one of the most important decisions in design, construction, and retrofit. Reviewed in this course are the features, benefits, and design and installation considerations related to mineral wool continuous insulation.
https://redirect.aecdaily.com/s5023/www.aecdaily.com/course/924606
One of the most complex and least understood areas where fire can propagate is at the perimeter of a multistory building. Fire can spread not only from floor to floor via the edge-of-slab/curtain wall intersections but also along the exterior building enclosure where untested, combustible components are often installed. This program outlines best design practices for providing fire protection for building occupants per ASTM E2307 and ASTM E2874.
https://redirect.aecdaily.com/s5023/www.aecdaily.com/course/1009062
Protected roof membrane assemblies (PRMAs), and vegetative roof assemblies (VRAs) in particular, place extreme requirements on the components below the surface, from waterproofing to insulation and everything in between. Each element must meet specific standards for energy efficiency and durability. This course reviews the benefits and design considerations of VRAs. It also describes the high-performance attributes of VRA components and defines the building code/performance standards and best specification practices for optimal fire, wind, thermal, and moisture performance.
https://redirect.aecdaily.com/s5023/www.aecdaily.com/course/1067507
This course explains the NFPA 285 test method, its origin, its procedures, when it is required, and design considerations necessary for compliance. Criteria in ASHRAE 90.1 for continuous insulation and air/water-resistive barriers are reviewed and identified as contributors to the rise of NFPA 285 requirements. The course also addresses code compliance in light of recent material changes, code changes, and additional testing.
https://redirect.aecdaily.com/s5023/www.aecdaily.com/course/1119498
A growing number of high-rise fire incidents around the world have raised awareness about the fire safety performance of taller structures. Timing for containing a high-rise fire is critical, as high numbers of occupants have limited means of escape. Vertical fire spread along the exterior facade may quickly overwhelm firefighters at ground level, especially if it advances to heights beyond the reach of their ground attack. This course looks at issues surrounding high-rise fires, how they spread, and how following building codes and proper material testing can lessen the risk or impact of these blazes.
https://redirect.aecdaily.com/s5469/www.aecdaily.com/course/1212997
When incorporating fire into design, the challenge is to integrate fire elements in ways that are safe, sustainable, and inspiring. This entails leveraging modern technologies that effectively control emissions, prevent hazards, and safeguard air quality. This course covers the specification, design, and installation considerations for custom commercial gas fireplaces with patented cool-touch technology, ensuring they align with the intended design and functionality across various industries.
https://redirect.aecdaily.com/s5654/www.aecdaily.com/course/1212012
As concrete is a carbon-intensive building material, design and construction professionals are encouraged to make informed, low-carbon design decisions. This course explores the evolving path toward low-carbon concrete solutions. Discussions include mix design optimization and trade-offs, exposure class, benchmarks, environmental product declarations (EPDs), and potential contributions toward LEED® v5 Building Design and Construction credits. Structural design strategies, performance-based specifications, and project-level carbon budgets are presented as means to support project and sustainability goals and performance requirements.
https://redirect.aecdaily.com/s5759/www.aecdaily.com/course/1030625
Metal roof and wall systems have long been specified for commercial, residential, and industrial buildings because they have a lengthy history of durability, reliability, and resilience. This course examines the attributes of metal panel systems and the design options that make metal-clad buildings sustainable, attractive, and suitable for a variety of applications and environmental conditions.
https://redirect.aecdaily.com/s8769/www.aecdaily.com/course/1000167
Architectural railing systems offer safety, durability, strength, and design flexibility for a variety of indoor and outdoor applications. This course provides an overview of the important factors that need to be considered when selecting and specifying a railing system for a commercial or residential building project. Topics include materials and finishes, fabrication and installation, and relevant building codes and standards.
https://redirect.aecdaily.com/s8769/www.aecdaily.com/course/1004301
A well-designed queuing system not only offers structure, efficiency, safety, and accessibility but also can enhance the aesthetics and visual appeal of an environment. This course presents an overview of the important factors that need to be considered when designing and specifying public queuing and pedestrian flow systems to facilitate a positive and orderly waiting experience.
https://redirect.aecdaily.com/s9727/www.aecdaily.com/course/1158278
A high-performance building envelope, such as one made with architectural insulated metal panels (IMPs), serves as the building’s primary defense against environmental elements and protects the health and well-being of its occupants. This course reviews the components and benefits of IMPs, which offer all four control layers—air, vapor, thermal, and water—within a single component, delivering superior thermal performance and high-end design.
https://redirect.aecdaily.com/s9727/www.aecdaily.com/course/1215472
For over 50 years, insulated metal panels (IMPs) have supported high-performance building enclosures by integrating thermal, air, vapor, and water control within a single system. This course reviews the building science and fire-safety principles that guide proper IMP use in the building envelope, ensuring occupant comfort and safety. Also examined are standardized test methods for evaluating enclosure performance and comparisons of IMPs with alternative wall and roof assemblies.
https://redirect.aecdaily.com/s10100/www.aecdaily.com/course/1159231
This course examines the design and benefits of pre-engineered trench drains in a sustainable wastewater management system. Discover how they effectively manage water runoff, prevent ponding, and enhance safety in transportation, industrial facilities, and public spaces while supporting sustainable practices. Explore system types, maintenance strategies, and performance optimization, along with guidance on funding and compliance. Gain the knowledge to implement smarter, safer, and more efficient water management solutions in your next project.
🍪 We use cookies to offer you a better browsing experience, analyze site traffic, personalize content, and serve targeted advertisements. Read about how we use cookies and how you can control them by clicking here. Click "cookie settings" to adjust your preferences.
