Building knowledge and connections

Continuing Education

Category: 10 00 00 - SPECIALTIES

Page: 1 2 3 4 5 Show All

  • There are numerous model codes written by both the ICC and NFPA relating to toilet room privacy partitions. This course provides information relative to selecting and specifying code-compliant toilet partitions for commercial restrooms, including material type, hardware, and mounting configurations. Fire and accessibility codes will be discussed, as well as guidelines for writing toilet compartment specifications.


  • The Americans with Disabilities Act of 1990 not only mandated designing for the disabled but also raised awareness of the issues involved and led to an even broader approach referred to as universal access. Complying with the ADA involves implementing the many details that make the difference between an accessible environment and one that is not. This course explains how locker installations should be designed to incorporate such details in order to be both ADA compliant and fully accessible. The explanation includes numerous drawings and photos of ADA-compliant lockers and locker components.


  • Without a doubt, the human-nature connection contributes to well-being and improves our mood. Water features are one way to extend this connection to the indoors. In this course we’ll review the components of indoor water features, design options and considerations and look at a few case studies.


  • Sustainability in construction and operation is becoming the new normal and the cleaning industry has responded by offering products for restroom facilities that are as energy-conserving and as environmentally-friendly as possible. This course provides an overview of the hand-drying options that are available for commercial restrooms, including the economic and environmental benefits of high-speed, energy-efficient hand dryers.

     This course is part of one or more "Course Collections". Click here to view the details.


  • This course presents an introduction to the types of gas fireplaces and vents, and covers the applicable code and standards for direct-vent, factory-built gas fireplaces. Also included are discussions on the new protective safety barrier requirements, test methods for fireplace efficiency, and typical steps for installing a direct-vent gas fireplace and barriers.

     This course is part of one or more "Course Collections". Click here to view the details.


  • Sound abatement products are not just a building owner and occupant preference; minimum sound abatement ratings are required by many local building codes for multi-story residential, commercial, and multi-purpose buildings. Following an introduction to the basics of sound, this course presents a summary of the most common sound control methods, with a focus on the options available for floor underlayment.


  • In the last couple of decades, houses have become progressively air tight due to energy efficiency and cost concerns. While air infiltration and ex-filtration rates have been significantly reduced, the need for an efficient ventilation system has become extremely important. The course evaluates different types of mechanical ventilation systems and discusses why heat recovery ventilation (HRV) and energy recovery ventilation (ERV) systems are characterized by a high level of energy efficiency and as an effective means for improving indoor air quality.

     This course is part of one or more "Course Collections". Click here to view the details.


  • In addition to being an effective alternative to artificial lighting options, daylighting provides a wide range of other benefits for both the building and its occupants. This course addresses achieving daylighting in building design using skylights and curtainwall. This program includes discussions on the basics of daylighting, glazing options, daylighting methods, creative design, and green benefits of daylighting systems.

     This course is part of one or more "Course Collections". Click here to view the details.


  • Aerogel is a translucent lightweight solid made from silica (sand) that is long-lasting and safe in its production and application. When filled with aerogel, multiwall polycarbonate provides high strength, high light transmittance, and high thermal resistance in a lightweight, long-lasting glazing system. This course examines aerogel’s remarkable properties and the glazing performance of aerogel-filled multiwall polycarbonate to daylighting design in multiple architectural design applications.

     This course is part of one or more "Course Collections". Click here to view the details.


  • Restroom facilities should provide easy access and use for all users, regardless of ability. It is becoming increasingly important to know the tools needed to properly plan an accessible restroom that will meet the requirements of the ADA and other standards. This course will explore how accessibility standards accommodate a wide range of users, including how to design lavatories, toilet compartments, bathing facilities, and their accessories to meet accessibility requirements.

     This course is part of one or more "Course Collections". Click here to view the details.


  • Provides an overview of antimicrobial additives that help protect products from degradation caused by microbes, with discussions on types of microorganisms and the array of products that can benefit from antimicrobials.

     This course is part of one or more "Course Collections". Click here to view the details.


  • Fireplaces remain one of the most desirable household features for homeowners, complementing a range of different lifestyles and appealing to a range of demographics. This course provides an overview of electric fireplaces, focusing on their design possibilities, flame technologies, ease of installation, environmental efficiency, cost-saving benefits, and their advantages over gas and wood-burning fireplaces.


  • Specialty door and frame assemblies have been developed that are designed specifically for the built healthcare environment where performance criteria are critical. Reviewed in this course are specialty door and frame assemblies that meet the challenges of infection prevention, building cleanliness, patient privacy, and increased security, as well as containment of radio wave and radiation interference in hospitals and clinics.

     This course is part of one or more "Course Collections". Click here to view the details.


  • Motorized doors in industrial and warehousing environments provide convenience, save time, and increase productivity. However, motorized doors also carry the risk of entrapment. This course explains the need for entrapment protection devices on motorized commercial and industrial doors and discusses how to specify the appropriate sensing edge actuation method and monitoring function to meet design, safety, and industry code requirements for specific building projects.


  • Centralized mail and package delivery is often a last-minute consideration that causes confusion due to the various compliance and accessibility requirements needed to complete the installation. This course is designed to demystify the process by providing a clear explanation of several mailbox installation specifications, accessibility standards, and design strategies.


  • Lack of secure bicycle parking and storage is one of the top barriers to increased bicycle ridership. However, there is much more to selecting functional and appropriate bike storage than installing a few racks at the building sidewalk. This course examines best practices for bicycle racks and shelters for indoor and outdoor bicycle parking and storage, including typical municipal guidelines and regulations, incentives, guidance on shelters, and rack planning and design.

     This course is part of one or more "Course Collections". Click here to view the details.


  • Without a doubt, the human-nature connection contributes to well-being and improves our mood. Water features are one way to extend this connection to the indoors. In this course we’ll review the components of indoor water features, design options and considerations and look at a few case studies.


  • Gas fireplaces offer a green, environmentally friendly heating solution for the modern era, with high efficiency ratings and contemporary designs that don’t sacrifice form for function. This course offers an overview of contemporary fireplace styles, options, venting, and installation, with a focus on cool wall technology and how it allows electronics and other design elements to be safely mounted over a fireplace.


  • Animals, plants, and microbes are engineers of what works and lasts on earth. Biomimicry is a practice in which nature's designs, patterns, and strategies are examined to find sustainable solutions to our technical and design problems. This course discusses how applying the concepts of biomimicry can better connect our designs and buildings with nature and examines the relationship between nature's solutions to light, heat, and glare control and today's shading design principles.

     This course is part of one or more "Course Collections". Click here to view the details.


  • As we become more aware of the levels of toxins in our environment we are realizing that the quality of air inside our homes is just as important as the quality of air outside our homes. This course provides an overview as to why indoor air quality is so important to our health and how to improve indoor air quality by using a balanced ventilation system.

     This course is part of one or more "Course Collections". Click here to view the details.


  • This course provides an overview of integral blind assemblies and discusses their benefits over conventional blinds, components and framing options, performance characteristics and testing standards, and common applications.


  • Not all types of storage lockers are the same, and each facility application calls for its own specifications. There are many different requirements to consider for locker selection. This course reviews the functional and operational needs of users in health and fitness centers, schools, athletic team locker rooms, medical facilities, industrial and manufacturing sectors, and law enforcement facilities. The features and components of metal, wood, phenolic, and plastic lockers are discussed, and guidelines are presented for specifying the right locker solution for user needs.


  • Buildings need protection from cyber as well as physical threats. Building shielding offers several architectural solutions that contribute to the security of both building occupants and wireless systems. These solutions also help reduce unwanted solar heat and glare while providing protection from the elements and people. This course presents the security and performance benefits of shielding technology that can improve wireless performance, energy efficiency, and occupant comfort, satisfaction, and safety.


  • Kitchens have evolved, and so has the role of refrigeration in the home, and there are a variety of factors that are contributing to this change. This course examines the social, economic, and demographic trends that are stimulating the reimagining of the kitchen space. The latest trends in kitchen design are discussed, as is the role of modular refrigeration—a key design element in the creation of functional spaces that reflect the changing domestic landscape.


  • Expanded polystyrene (EPS) is a molded, lightweight, resilient, foamed plastic that is used in a variety of construction products. The impact-absorbing and structural properties of EPS provide a unique advantage over alternative materials. This course provides a review of EPS insulation, EPS geofoam, and ICF/SIP building system solutions produced using sustainable EPS manufacturing processes. Applicable material properties, product standards, and code references are also discussed.

     This course is part of one or more "Course Collections". Click here to view the details.

Page: 1 2 3 4 5 Show All
AEC Daily Free Online Courses