Bicycle Parking & Storage: Inside & Out ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s723351/www.aecdaily.com/course/907595

Lack of secure bicycle parking and storage is one of the top barriers to increased bicycle ridership. However, there is much more to selecting functional and appropriate bike storage than installing a few racks at the building sidewalk. This course examines best practices for bicycle racks and shelters for indoor and outdoor bicycle parking and storage, including typical municipal guidelines and regulations, incentives, guidance on shelters, and rack planning and design.

Heat Recovery Ventilation: Why Efficiency Matters ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s19871/www.aecdaily.com/course/888488

In the last couple of decades, houses have become progressively more airtight due to energy efficiency and cost concerns. While air infiltration and exfiltration rates have been significantly reduced, the need for an efficient ventilation system has become extremely important. This course evaluates different types of mechanical ventilation systems and discusses why heat recovery ventilation (HRV) and energy recovery ventilation (ERV) systems are characterized by a high level of energy efficiency and as an effective means for improving indoor air quality.

Glass Fiber Reinforced Concrete (GFRC) ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s707154/www.aecdaily.com/course/969691

Throughout history, concrete mixes and carved natural stone have combined to create substance, beauty, and longevity in our architecture. Glass fiber reinforced concrete (GFRC) was created to ensure that the attributes of concrete and stone continue to be enjoyed but with efficiency in the application that is expected in today's world of design. This course covers the creation of GFRC, its components, fabrication, applications, and design capabilities. It compares GFRC to other types of architectural concrete and presents GFRC performance and sustainable design advantages.

12 Ways to Recover an Existing Sloped Roof Using a Standing Seam Roof System ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s9525/www.aecdaily.com/course/1134713

Metal roofing is often preferred for retrofitting a low-slope roof due to its durability, ease of installation, energy efficiency, and water channeling capabilities. This course examines why metal roofs fail, the types of structural standing seam panels, and the pros and cons of different methods for recovering an existing low-slope roof.

Redwood Lumber & Timbers: Advanced Specification Details ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s632921/www.aecdaily.com/course/969584

Redwood lumber and timbers from sustainably managed and harvested forests offer warmth, durability, and strength in indoor and outdoor projects. This course covers the performance characteristics, environmental benefits, and applications of Redwood, including several case studies that highlight the beauty and versatility of Redwood products. Details are presented on differentiating the grades of Redwood, specifying the right grade for the project type, and the specification resources that are available.

Resilient Flooring: A Design Professional’s Guide ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s1078641/www.aecdaily.com/course/1094382

Resilient flooring offers a wide variety of natural wood, stone, and abstract visual designs in numerous formats and installation options. Luxury vinyl flooring (LVF) and stone polymer composite (SPC) are types of resilient flooring designed to replicate the appearance of wood and stone without the labor, maintenance, or cost of natural materials. This course delves into the types, composition, performance features, and applications of LVF and SPC flooring designed for durable and aesthetically pleasing solutions for commercial and residential applications.

Acetylated Wood: Discover the Difference for Siding, Decking, and More ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s445448/www.aecdaily.com/course/1044818

Wood is both beautiful and practical but lacks long-term durability when used outdoors. Acetylation changes the material properties of the wood at the molecular level to improve its stability and weathering capabilities. This course reviews the acetylation process, its impact on wood performance, and how and where this type of wood can be used. Also discussed are the green features of acetylated wood and how it can contribute toward earning points in the LEED® v4 green building rating system.

Concrete-Faced Continuous Insulation Systems ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s13907/www.aecdaily.com/course/903646

Concrete-faced insulated products are composite prefinished panels that are used to construct walls and roofing assemblies to maximize the energy efficiency, durability, and performance of a building envelope. This course discusses the design criteria used in designing energy-efficient buildings using concrete-faced continuous insulation systems for low-slope roofing, walls, and foundations. The functional and physical features of protective membrane roof (PMR) systems, concrete-faced insulated panels for walls and foundations, and concrete structural insulated panels (CSIPs) are evaluated.

Sustainable Solutions for Sectional and Rolling Doors ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s17282/www.aecdaily.com/course/888035

Can commercial overhead doors contribute to the sustainability goals of buildings requiring garage, drive-through, fire, dock, and service products? To meet these goals, commercial sectional and rolling doors should be engineered to provide energy efficiency and personnel protection, and to mitigate fire and wind damage. This course examines the sustainable attributes of commercial overhead doors and explores their design potential in LEED® compliant projects.

Architectural LED Lighting: Conceptual Design Principles for Lighting Schemes ( ~ 1 hour, 30 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s18525/www.aecdaily.com/course/1097698

“Good” lighting is more than photometric performance: it is an art and a science that is truly greater than the sum of its parts. It must meet the visual needs of many and satisfy a myriad of individuals’ subjective perceptions. Architectural lighting design is a series of planned experiences involving people and spaces that we create by modulating and delivering light. This course discusses a conceptual framework for lighting design that specifiers can use to bring an architectural vision to life with the most powerful medium available to enrich the built environment and enhance the end-user experience: light!

Gaining a US/CAN Perspective on Accessibility ( ~ 1 hour, 15 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s932109/www.aecdaily.com/course/932135

This course introduces accessibility from Canadian and US perspectives. It covers a few specific technical accessibility requirements and compares the differences when referencing Canadian or US design standards, such as the National Building Code of Canada (Canada's Model Code) or the Americans with Disabilities Act (ADA) (the United States accessibility regulation), while reinforcing the intent of good design that is not always outlined by a code or standard. The seven principles of universal design are also discussed.

 In order to download this course, a USD $35.00 fee must be paid.

Artisanal Craft in Sustainable Spaces ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s610566/www.aecdaily.com/course/857878

This presentation celebrates the value of incorporating artisanal, handcrafted fixtures and furnishings into a building’s design. Not only are these products unique, functional, and aesthetically appealing, but they can also establish a sense of connection with their maker. Many artisanal, handcrafted products are made using traditional techniques that have been passed down over time, often from generation to generation. And because many of these products are made from sustainable, recycled, or reclaimed materials that are locally available, they can help reduce the environmental impact of a new build. This course illustrates how sourcing artisan-made products for their projects can allow designers and builders to effect social, economic, and environmental change.

Designing with Rooftop Support Systems ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s1134927/www.aecdaily.com/course/1144645

Locating mechanical and electrical equipment on a roof is often necessary for space and efficiency in a building design. However, it can be challenging to provide a means for safe maintenance access while preserving the roof membrane and structural integrity and not interfering with other rooftop equipment. This course presents the components that comprise rooftop support systems designed to solve these challenges, as well as system design considerations and compliance with the International Building Code® (IBC®) and the International Mechanical Code® (IMC®).

Vinyl & Aluminum Railing Systems ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s574478/www.aecdaily.com/course/800190

Railing systems perform various functions, meeting safety requirements and serving as a key component of a building’s aesthetic. This course includes a discussion of the strengths and weaknesses of aluminum and structural vinyl railing systems, how they are made, and how they are used in the building industry, including a detailed summary of how they meet various code requirements.

Designing for Sustainability: Synthetic Turf and the Triple Bottom Line ( ~ 30 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s796722/www.aecdaily.com/course/1116967

As synthetic turf systems evolve as functional and aesthetic landscape solutions, conversations about sustainability, particularly environmental impacts, are essential. This course addresses the sustainability of synthetic turf from the triple-bottom-line perspective: profit, people, and planet. Also discussed is how synthetic turf can contribute to achieving certification in LEED® v4.1 Building Design and Construction, Sustainable SITES Initiative® v2, and the WELL Building Standard™ version 2.

Enhancing Outdoor Living: Current Trends & the Role of Aluminum Shade Structures ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s1082406/www.aecdaily.com/course/1111937

This course delves into the increasing and expanding role of outdoor living and its importance in households, businesses, and communities. Reviewed are the styles and specification considerations of aluminum shading products. The focus is pergolas and cabanas made with dual-walled aluminum louvers that seal completely to block rain and snow and complement any architectural style.

Low Impact Development & Permeable Pavers ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s705300/www.aecdaily.com/course/883759

Low Impact Development (LID) has several advantages over traditional stormwater management approaches. Since impervious pavement is the main source of stormwater runoff, LID strategies recommend permeable paving for hard surfaces. The course discusses LID, its goals and principles, and how they are achieved. It provides an overview of permeable pavements, and more particularly, plastic permeable grid paver systems and how they support LID goals.

Innovative Rooftop Snow Retention Solutions ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s19165/www.aecdaily.com/course/999164

At this time, there are no national or state codes relating to snow retention for roofing applications, even in the heaviest snow load areas. Consequently, it is very important for building professionals to take extra care when designing a snow retention system for installations in snowy environments. This course provides a review of the problems and solutions associated with roofing in cold climates, including a discussion on the proper engineering of snow retention devices. There are many dangers involved if the appropriate considerations are not made while building and maintaining a roof in an alpine region.

Extra R-Value: How to Get More with Less Space ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s904648/www.aecdaily.com/course/1155231

From pitched to low-slope roofing, a myriad of designs are possible. Conventional roofing with the waterproofing membrane located weather-side and protected membrane roofing with the waterproofing membrane located at the deck can be used on buildings of various end uses. Roofs can be low or high albedo to impact solar gain; add to this vegetative roof assemblies (green roofs), roofs with solar arrays, and blue roofs (stormwater management), and no two roofs are alike. Join us to review the modern roof taxonomies and associated benefits and drawbacks, learn about the latest options in roof construction, and reflect on performance differences.

Making the Practical and Financial Case for Sustainable Roofing Systems ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s5147/www.aecdaily.com/course/1085664

Today’s business environment presents significant challenges for commercial roofing systems. Shortages and disruptions in the supply chain, coupled with a diminishing labor force, have led to uncertainty, inflation, and scheduling difficulties for many projects. However, these challenges also open doors for innovative solutions. This course explores the financial and environmental advantages of using a PVC roofing system. It also highlights the benefits of choosing a roofing system from a single supplier.

Decorative Beams, Panels, Truss Systems, Mantels, and Column Covers ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s981888/www.aecdaily.com/course/999635

Adding wood, stone, or masonry accents can dramatically change the look of a space, but time, cost, or even structural requirements can interfere. This course reviews the use of realistic, lightweight, cost-effective, and easy-to-install options for decorative faux elements. The performance, design options, and installation of high-density polyurethane panels, beams, truss systems, mantels, and column covers are examined.

Thermal Spacers for Code Compliance and Improved Energy Efficiency in Metal Buildings ( ~ 1 hour, 30 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s680223/www.aecdaily.com/course/901794

The key to an energy-efficient metal building is the implementation of a continuous insulation system that virtually eliminates thermal bridging and prevents condensation. This course discusses how using thermal spacer blocks and metal building insulation in the building envelope increases energy performance, protects against condensation, and meets stringent energy code requirements.

Structural Steel: Sustainability & Fireproofing ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s753464/www.aecdaily.com/course/844146

With the ever-increasing focus on the sustainable built environment, building owners, architects, engineers, and contractors are incorporating structural steel into their designs. Presented here is a comprehensive view of the cradle-to-cradle structural steel supply chain from a sustainability perspective. Also discussed are steel production and design, steel’s potential contribution to LEED v4 credits, thermal capacity, and the environmental and life cycle benefits of prefabricated fireproof steel columns.

Booming Bamboo: The (Re)discovery of a Sustainable Material with Endless Possibilities ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s867585/www.aecdaily.com/course/889638

The growing global population is creating an increased demand for resources. As a result, there is a need to replace fossil-based, nonrenewable building materials with more bio-based materials, such as bamboo. This course describes the properties of bamboo that make it a more sustainable choice, including its fast growth and CO2 saving and storing potential. It also discusses how active bamboo reforestation and the use of durable bamboo products can lead to CO2 reduction across many industries.

Cold Storage and Controlled Environments Using Insulated Metal Panels ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s9727/www.aecdaily.com/course/811766

Thermally controlled environments such as cold storage freezers and coolers, and food processing and packaging facilities take many different forms. Their performance and functionality depend on their project-specific requirements and can be affected by the conditions the materials and systems are subjected to. This course discusses how insulated metal panels (IMPs) perform the necessary functions to provide an effective energy-efficient building envelope and why they are suitable for use within temperature-controlled hygienic environments—where performance is critical.