Bicycle Parking & Storage: Inside & Out ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s723351/www.aecdaily.com/course/907595

Lack of secure bicycle parking and storage is one of the top barriers to increased bicycle ridership. However, there is much more to selecting functional and appropriate bike storage than installing a few racks at the building sidewalk. This course examines best practices for bicycle racks and shelters for indoor and outdoor bicycle parking and storage, including typical municipal guidelines and regulations, incentives, guidance on shelters, and rack planning and design.

Designing with Nature’s Building Block: Embracing the Dynamics of Wood Movement ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s1155903/www.aecdaily.com/course/1168304

Wood is a sustainable building material that must be properly detailed to reach its full performance and durability potential. This course explores the intricate relationship between wood and water, providing insights into moisture management strategies crucial for achieving durability in exterior wood installations. Discussions include the natural properties of wood, dynamics of wood movement, wood drying processes, rainscreen principles, and designing for wood movement in cladding and decking applications.

Scalding: Understanding Design Solutions for Risk Reduction. What Architects Need to Know about Reducing Scalding Risk with Point of Use Solutions ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s3515/www.aecdaily.com/course/969656

The potential for scalding from point of use hot water affects all of us. While the very young and the very old are more susceptible, no one is immune from scalding danger. An understanding of the potential for scalding, as well as the physiology of burns from hot water, can guide our design choices and significantly reduce the danger to people using facilities that commonly supply hot water, such as lavatories, baths, and showers. This course discusses the potential for scalding, the physiology of burns due to hot water, and who is most susceptible. It also discusses the relevant codes and the fixtures available to designers that can help reduce scalding and burn potential.

The Solar-Plus-Storage Ecosystem ( ~ 1 hour, 15 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s1092062/www.aecdaily.com/course/1134323

Residential solar power generates clean energy, reduces carbon footprint, protects against rising electricity rates, and protects property from outages, but it is only effective during daylight hours. Adding battery storage to a solar system—called solar plus storage—removes this limitation and moves a home closer to energy independence. In this course, we will review the components of a solar-plus-storage system, including selection considerations for residential rooftop solar and DC-coupled solar batteries. The course also reviews the extended system of monitoring and DC charging.

Underslab Vapor Retarders in Buildings ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s9572/www.aecdaily.com/course/969550

Underslab moisture is something that designers need to take into consideration in both the design and construction phases of a building project. It can cause many problems for the building and the health of its occupants over the course of its life span; however, if properly addressed during design and construction, many of these issues can be mitigated. This course looks at the different types of moisture movement that exist below the slab, examines solutions for a variety of site conditions, and reviews best practices for managing moisture.

Architectural Fire Extinguisher Cabinets: Supporting Life Safety with Custom Designs ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s795432/www.aecdaily.com/course/1094359

Life-safety systems encompass both passive fire-protection features, like compartmentation and firestopping, and active ones, such as sprinklers and alarms. Portable fire extinguishers are an integral part of life-safety systems and must meet code-mandated number and placement requirements in most building types. This course looks at how fire extinguishers can be stored safely and securely in cabinets and addresses specification considerations. Also reviewed are the many options available to customize fire extinguisher cabinets so they are tailored to each project’s needs and design goals.

The Rooftop Environment: Designing for Safe Access and Fall Protection ( ~ 1 hour, 15 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s1021711/www.aecdaily.com/course/1044026

Anytime a facility has people working on a roof, their safety and protection must be the priority. Even under the best conditions, working on a rooftop is dangerous due to the roof’s elevation, slope, and edge, as well as other hazards created by weather conditions, electricity, and power tools. This course reviews the hazards of the rooftop environment and the relevant Occupational Safety and Health Administration (OSHA) regulations to aid designers, property owners, and facility managers in selecting safe access and fall protection systems for their buildings.

Concrete-Faced Continuous Insulation Systems ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s13907/www.aecdaily.com/course/903646

Concrete-faced insulated products are composite prefinished panels that are used to construct walls and roofing assemblies to maximize the energy efficiency, durability, and performance of a building envelope. This course discusses the design criteria used in designing energy-efficient buildings using concrete-faced continuous insulation systems for low-slope roofing, walls, and foundations. The functional and physical features of protective membrane roof (PMR) systems, concrete-faced insulated panels for walls and foundations, and concrete structural insulated panels (CSIPs) are evaluated.

Sustainable Solutions for Sectional and Rolling Doors ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s17282/www.aecdaily.com/course/888035

Can commercial overhead doors contribute to the sustainability goals of buildings requiring garage, drive-through, fire, dock, and service products? To meet these goals, commercial sectional and rolling doors should be engineered to provide energy efficiency and personnel protection, and to mitigate fire and wind damage. This course examines the sustainable attributes of commercial overhead doors and explores their design potential in LEED® compliant projects.

Optimizing Energy Efficiency and Thermal Comfort with Radiant Heating and Cooling ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s1078698/www.aecdaily.com/course/1097505

Energy conservation and occupant well-being, comfort, and productivity are issues of increasing concern in building design. This course illustrates how radiant heating and cooling systems address these issues positively and efficiently. It encompasses the various types of systems available and how they can contribute to credit requirements in the LEED® v4.1 Building Design and Construction rating system and the WELL Building Standard™ version 2. System workings, design, aesthetic considerations, advantages, testing and measuring protocols, and installation procedures are reviewed, and the course concludes with several installation examples.

Entrance Flooring Systems: Design with the Elements in Mind ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s2955/www.aecdaily.com/course/931279

The purpose of this course is to provide an introduction to the use of entrance floor systems in commercial buildings in order to promote a safe and clean environment. The course explains the codes, regulations, and guidelines specifically related to entrance flooring systems for high-traffic entrances in healthcare, education, transportation, corporate, and other commercial settings.

Concrete That Cleans Itself and the Environment ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s5654/www.aecdaily.com/course/857200

Concrete is the most widely used construction material in the world, second only to water. Over time, as a result of the build-up of atmospheric compounds in the surrounding environment, concrete will become discolored, stained, dirty, and dingy. This course examines photocatalytic technology which accelerates self-cleaning and fights air pollution while maintaining the mechanical and physical properties of traditional concrete.

Designing with Rooftop Support Systems ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s1134927/www.aecdaily.com/course/1144645

Locating mechanical and electrical equipment on a roof is often necessary for space and efficiency in a building design. However, it can be challenging to provide a means for safe maintenance access while preserving the roof membrane and structural integrity and not interfering with other rooftop equipment. This course presents the components that comprise rooftop support systems designed to solve these challenges, as well as system design considerations and compliance with the International Building Code® (IBC®) and the International Mechanical Code® (IMC®).

Vinyl & Aluminum Railing Systems ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s574478/www.aecdaily.com/course/800190

Railing systems perform various functions, meeting safety requirements and serving as a key component of a building’s aesthetic. This course includes a discussion of the strengths and weaknesses of aluminum and structural vinyl railing systems, how they are made, and how they are used in the building industry, including a detailed summary of how they meet various code requirements.

Designing for Sustainability: Synthetic Turf and the Triple Bottom Line ( ~ 30 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s796722/www.aecdaily.com/course/1116967

As synthetic turf systems evolve as functional and aesthetic landscape solutions, conversations about sustainability, particularly environmental impacts, are essential. This course addresses the sustainability of synthetic turf from the triple-bottom-line perspective: profit, people, and planet. Also discussed is how synthetic turf can contribute to achieving certification in LEED® v4.1 Building Design and Construction, Sustainable SITES Initiative® v2, and the WELL Building Standard™ version 2.

Acoustical Ceiling Restoration ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s381226/www.aecdaily.com/course/1111932

In today’s building designs, considering the environmental impact of construction projects is of utmost importance. As a result, factors such as durability, installation speed, cost reduction, and long-term value have become crucial aspects of building designs. This course addresses these concerns in the context of nonresidential building renovations, focusing specifically on using state-of-the-art acoustical ceiling coatings as an alternative to removal and replacement with new materials. The course also examines how acoustical ceiling coatings may apply to several credits and features in the LEED® v4.1 Building Design and Construction rating system and the WELL Building Standard™ version 2.

Architectural Fencing & Gate Systems for Security, Privacy, & Visual Appeal ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s1359/www.aecdaily.com/course/881285

Gate and fencing systems can be both functional and decorative. This course illustrates how architectural gate and fencing systems can be designed to meet modern security and design requirements while harmonizing with their surrounding environment. Fencing and gate systems are discussed in terms of their composition, materials, coatings, finishes, and performance in interior and exterior applications.

Innovative Rooftop Snow Retention Solutions ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s19165/www.aecdaily.com/course/999164

At this time, there are no national or state codes relating to snow retention for roofing applications, even in the heaviest snow load areas. Consequently, it is very important for building professionals to take extra care when designing a snow retention system for installations in snowy environments. This course provides a review of the problems and solutions associated with roofing in cold climates, including a discussion on the proper engineering of snow retention devices. There are many dangers involved if the appropriate considerations are not made while building and maintaining a roof in an alpine region.

Pitfalls and Challenges of NFPA 285 Engineering Analysis ( ~ 1 hour, 30 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s904648/www.aecdaily.com/course/1155220

Engineering analysis is a necessary tool to provide fire protection and safety for our buildings. The exponential number of wall assembly combinations and detailing of enclosure assemblies in the built environment prevent the opportunity to confirm fire performance through direct testing. This is especially true with the required investment of time, effort, and cost for larger-scale tests such as NFPA 285. Qualified fire engineering teams, in partnership with third-party labs and product manufacturers, offer the opportunity to extend successful test results beyond the tested specimen through an engineering analysis report. This presentation discusses the opportunities, challenges, and limitations present when considering the acceptance of test data extended to support substitution or modification to an assembly.

Bollards for Protection: The Importance of Crash Testing ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s892132/www.aecdaily.com/course/1085028

Vehicle barriers are needed to protect property and occupants against various threats, including wayward drivers, accidental impacts, smash-and-grab burglaries, and vehicle-ramming attacks. Given the various barriers available, it is crucial to understand how to evaluate and select a perimeter security solution that suits each application. This course reviews the types of barriers and their related testing and performance standards to help ensure the right product is specified for the area it is intended to protect.

Decorative Beams, Panels, Truss Systems, Mantels, and Column Covers ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s981888/www.aecdaily.com/course/999635

Adding wood, stone, or masonry accents can dramatically change the look of a space, but time, cost, or even structural requirements can interfere. This course reviews the use of realistic, lightweight, cost-effective, and easy-to-install options for decorative faux elements. The performance, design options, and installation of high-density polyurethane panels, beams, truss systems, mantels, and column covers are examined.

Thermal Spacers for Code Compliance and Improved Energy Efficiency in Metal Buildings ( ~ 1 hour, 30 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s680223/www.aecdaily.com/course/901794

The key to an energy-efficient metal building is the implementation of a continuous insulation system that virtually eliminates thermal bridging and prevents condensation. This course discusses how using thermal spacer blocks and metal building insulation in the building envelope increases energy performance, protects against condensation, and meets stringent energy code requirements.

The Benefits of Synthetic (Artificial) Grass for Playgrounds ( ~ 1 hour, 15 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s796052/www.aecdaily.com/course/843093

Synthetic (artificial) grass or turf has improved steadily since its first installation half a century ago, and it is now a sophisticated surfacing system that can be customized to suit specific purposes. This course reviews that development and then focuses on the specifics of synthetic grass suitable for use on playgrounds. This focus includes a detailed examination of its construction, installation, and maintenance, and a number of sample installations.

Thermoplastic Sheet Products for High-Performance Architectural Glazing ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s5057/www.aecdaily.com/course/888587

Building owners value daylighting and views but face security and safety challenges with large amounts of glazing. Thermoplastic sheet products offer a variety of glazing solutions that resist security threats while providing transparency, strength, and durability. This course introduces the grades and characteristics of acrylic and polycarbonate sheet products and discusses how they meet the requirements for protection against forced entry and ballistics.

Cold Storage and Controlled Environments Using Insulated Metal Panels ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s9727/www.aecdaily.com/course/811766

Thermally controlled environments such as cold storage freezers and coolers, and food processing and packaging facilities take many different forms. Their performance and functionality depend on their project-specific requirements and can be affected by the conditions the materials and systems are subjected to. This course discusses how insulated metal panels (IMPs) perform the necessary functions to provide an effective energy-efficient building envelope and why they are suitable for use within temperature-controlled hygienic environments—where performance is critical.