The Nova Scotia Association of Architects

The Nova Scotia Association of Architects (NSAA) is a self-governing professional association established in 1932, and mandated by the Province of Nova Scotia under The Architects Act to regulate the practice of architecture in the province.

Click to Learn More About the Nova Scotia Association of Architects

Visit www.nsaa.ns.ca and Join Now!

Displaying 1 - 25 of 46 results.

FIRST [1-25] [26-46] NEXT LAST SHOW ALL

  • ( ~ 1 hour ) 

    In the last couple of decades, houses have become progressively more airtight due to energy efficiency and cost concerns. While air infiltration and exfiltration rates have been significantly reduced, the need for an efficient ventilation system has become extremely important. This course evaluates different types of mechanical ventilation systems and discusses why heat recovery ventilation (HRV) and energy recovery ventilation (ERV) systems are characterized by a high level of energy efficiency and as an effective means for improving indoor air quality.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    In food and beverage, food processing/distribution, and cold storage facilities, it is important to use doors that can provide speed, safety, separation, and security. High-speed, high-cycle, roll-up doors provide all these elements better than conventional doors. This course provides an in-depth discussion of the different types of high-performance doors—fabric, rigid, and rubber—along with their benefits and functions in different applications. The specification criteria, design, and installation considerations for high-performance doors are also discussed.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Currently, buildings are the single biggest contributor to GHG emissions, accounting for roughly half of all energy consumption in the U.S. and globally. It is crucial to reduce this level of consumption by including high-performance envelope strategies such as shading systems in all new building designs. In this course, we look at shading systems, examine shading and design strategies, and learn tips for successful selection and design.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    Over time, urban parks and other open landscaped areas are being lost to development. One solution to mitigate this issue is to reconsider undeveloped areas such as building roofs to create green amenity spaces. Amenity decks can provide some alleviation of lost green space, while affording developers the potential to monetize underutilized spaces in their buildings and provide an advantage over older buildings to attract tenants.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Commercial rolling service doors offer high performance solutions for demanding areas. Used both internally and externally, these doors provide excellent thermal insulation, strength, and durability in challenging environments. This course examines the characteristics of rolling service doors, fire doors, grilles, and shutters. Door operation, parts, fire code requirements, and wind load information are also discussed.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 30 minutes ) 

    Masonry is an ideal sustainable building construction material as it is extremely durable, recyclable, and reusable. It allows for extraordinary design versatility, so it can meet both aesthetic and functional requirements. This course looks at the design elements, components, and construction techniques that characterize sustainable masonry cavity wall building envelopes.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    In applications where wood may be exposed to moisture, insects, or fungal organisms, preservative-treated wood can ensure a project’s durability. This course reviews: the manufacturing process for pressure-treated wood; types of preservative treatments and the required levels of retention as dictated by the end-use application, desired service life, and exposure conditions; American Wood Protection Association (AWPA) Use Category standards; current issues concerning preserved wood in residential and commercial construction; and Best Management Practices (BMPs) for aquatic uses.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    Le besoin d’évaluer les ponts thermiques dans la conception et le rendement d’un bâtiment a gagné en importance en raison des exigences grandissantes en matière d’efficience énergétique des bâtiments. Ce cours sert d’introduction aux ponts thermiques, aux exigences du code de l’énergie et à l’usage de barrières thermiques conçues pour améliorer l’efficience énergétique de l’enveloppe du bâtiment.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    The design of behavioral healthcare facilities should address the therapeutic and safety needs of patients and staff while meeting the applicable codes and regulations. Reviewed in this course are ligature-resistant products developed for patient rooms and bathrooms that strike the balance between providing the safest design solutions and creating a noninstitutional environment.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Although known for being a strong and versatile building material, there are a number of factors that affect the sustainability of concrete, and a variety of measures that can be taken to increase its durability and extend its service life, thus protecting the health, safety, and welfare of the users. This course discusses the environmental impact of concrete and some of the main causes of concrete deterioration, and examines how crystalline waterproofing technology can be employed to increase the durability and sustainability of concrete.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    Due to their durability, low operational cost, and sustainability, metal roofs are gaining popularity in both commercial and residential markets. Owner expectations for this product family have increased as well and now include heightened aesthetics and long-term performance. While metal roofing systems are certainly up to these challenges, when they fail, the results are costly. Consequently, it is imperative designers have full knowledge of metal roof design and detailing. This course covers the top ten problems metal roof designers face and describes how these problems can be prevented through proper design.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Third-party environmental product declarations (EPDs), using a life-cycle analysis (LCA) approach, provide a comprehensive analysis and quantification of a product’s sustainability. This course examines how EPDs can inform sustainable site furniture selection and how the use of sustainable site furniture can contribute to meeting various credit requirements of LEED® v4.1 Building Design and Construction, Sustainable SITES Initiative® v2, and the WELL Building Standard™ version 2.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    This introductory course on spray polyurethane foam (SPF) covers component chemistry, different types of SPF, and the proper use of SPF in construction applications. In addition, the course addresses code compliance related to SPF for residential and commercial construction, as well as safe SPF installation practices. Participants will come away with a strong knowledge of how the proper use and application of spray foam can improve the indoor environment and the durability of the built environment.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Insulated metal panels (IMPs) are lightweight composite exterior wall and roof panels with superior insulating properties. Commercial and industrial buildings benefit from their energy efficient insulation, lightweight construction, durability, and cost-effective, timely installation. This course discusses IMPs in terms of their design options, appropriate support structure, installation, function, code compliance, and warranties.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    In designing successful interior building spaces that positively impact their occupants, it is critical to have knowledge of the principles of acoustics and noise control and link them to design methodology. This course explores these principles, with a special emphasis on common building types where acoustics and noise control are often required and noise can have detrimental effects on users, such as athletic facilities and performance spaces.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    When designing noise control measures for a building, it is critical to look beyond the sound transmission class (STC) and impact insulation class (IIC) ratings in order to create an ideal environment that promotes occupant well-being, protects their hearing, and fulfills the project’s needs. This course provides an overview of noise control principles, construction composites, and design methodologies that reduce noise, with an emphasis on performance-oriented designs requiring third-party acoustical consultants.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    An air curtain, also known as an air door, employs a controlled stream of air aimed across an opening to create an air seal. This seal separates different environments while allowing a smooth, unhindered flow of traffic and unobstructed vision through the opening. This course discusses how air curtains work and why they can contribute to occupant comfort, energy efficiency, and indoor air quality when the door is open. It also reviews how air curtains improve whole-building energy efficiency versus conventional methods.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Provides an overview of the noise issues associated with floor/ceiling assemblies of multifamily dwellings, as well as the factors that affect acoustical performance. Also presented is a review of the acoustical solutions that are available with a focus on sound mats with poured underlayment (SMPU) systems.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Concrete-faced insulated products are composite prefinished panels that are used to construct walls and roofing assemblies to maximize the energy efficiency, durability, and performance of a building envelope. This course discusses the design criteria used in designing energy-efficient buildings using concrete-faced continuous insulation systems for low-slope roofing, walls, and foundations. The functional and physical features of protective membrane roof (PMR) systems, concrete-faced insulated panels for walls and foundations, and concrete structural insulated panels (CSIPs) are evaluated.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Glass wall and door systems endow architectural concepts with transparent elegance. This course covers the benefits of interior glass wall and door systems and includes discussions on types of glass walls and operable systems; door types, rails, headers, hardware, and applications; glass types; and access control. It presents design and code considerations and specification of glass assemblies.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Vertical-lift doors and windows enhance the functionality and convenience of many types of spaces, and when offered with an array of innovative customization options, the result is a unique, aesthetically pleasing opening that can transform any residential or commercial design. This course reviews the types of openings and lifting systems, safety features, and design options. Also addressed are the sustainability benefits that can contribute toward credit fulfillment in the LEED® v4.1 Building Design and Construction and Interior Design and Construction rating systems, as well as in the WELL Building Standard™ v2.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    Integrated fire and smoke door systems meet all life safety and compartmentalization requirements without sacrificing an architect’s vision. This course explains how multiple codes and standards apply to an opening, elevator lobby, and elevator shaft and discusses how integrated door systems provide building owners with a complete turnkey door system that uses components engineered to work as a unified whole. 

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    A large portion of new commercial and residential buildings built today are equipped with clear, floor-to-ceiling glass. Does this new expansive area of glass lead to daylight optimization? This course explains the impacts of daylighting on human health and building occupant comfort. Proactive and reactive automated shading systems are discussed, and the course explains how a properly designed shading system can reduce whole-building energy consumption. Automated shading systems in projects of various scopes and scales are also discussed.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    People spend more than 90% of their time indoors; incorporating sunrooms, conservatories, greenhouses, and/or other glass structures into homes or workplaces can be an effective way to reap the benefits of daylight. The positive impacts of incorporating more natural light into your lifestyle can be seen through energy savings, increase of productivity, and improvement of overall well-being. This presentation reviews strategies and design options to create unique overhead structures, standing structures, and vertical glazing systems that are energy efficient, comfortable, and functional.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    Commercial planters add interest to both commercial and residential spaces. An understanding of materials and options available when specifying planters is an essential tool for both designers and architects. These topics are addressed in this course along with discussions on the applications of commercial planters and the benefits they offer in the design of indoor and outdoor spaces.

    Ask a Question
    SAVE FOR LATER

Displaying 1 - 25 of 46 results.

FIRST [1-25] [26-46] NEXT LAST SHOW ALL