Building Knowledge and Connections
Displaying 26 - 50 of 185 results.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s987165/www.aecdaily.com/course/1035082
Precast concrete pavers and roof deck systems enable designers to deliver on aesthetics and design objectives while achieving safety and durability requirements. Patented roof deck systems allow for the creation of safe and stable roof deck patios and green roofs that maintain sustainability requirements. This course examines the raw materials used in these systems, reviews the different finishes available, and discusses different paver applications and their methods of installation.
https://redirect.aecdaily.com/s936444/www.aecdaily.com/course/1210361
PVC and KEE single-ply roofing membranes are widely used in sustainable building design due to their durability, material efficiency, and recyclability. This course provides an overview of installation, warranties, and maintenance requirements and explores the role of membranes in reflective and vegetated roof systems. Also examined are their potential contributions toward LEED® v5 Building Design and Construction and Sustainable SITES® v2 credits addressing urban heat island mitigation, solar panel readiness, stormwater management, and construction and demolition waste reduction.
https://redirect.aecdaily.com/s904648/www.aecdaily.com/course/1035801
This course details the benefits and selection process of magnesium oxide (MgO) sheathing in multifamily and commercial construction. MgO sheathing offers structural, fire resistance, and other properties that enable architects and designers to simplify the design and installation of building enclosures. Comparisons of MgO sheathing to traditional sheathing materials such as gypsum are included.
https://redirect.aecdaily.com/s9572/www.aecdaily.com/course/962747
Air barriers improve the health and comfort of building occupants, improve energy efficiency, and prevent premature degradation of materials, increasing the structure’s life cycle. A successful air and moisture barrier system means under-slab, below-grade, and above-grade systems must work together to provide a continuous barrier. This course looks at above-grade air barrier systems and their types and components. Continuity and compatibility, specification, and installation challenges are also considered.
https://redirect.aecdaily.com/s3379/www.aecdaily.com/course/826168
Understanding building physics is critical to proper building envelope design. Examined here are practical concepts for the building designer, including how cladding systems perform across different climate zones and applications. Environmental control layers and hygrothermal loads are reviewed, as is the concept of perfect/universal wall design. The course focuses on how single-component insulated metal panels (IMPs) function as a perfect/universal wall, simplifying wall system design and installation.
https://redirect.aecdaily.com/s13011/www.aecdaily.com/course/968975
According to building professionals, the solution to achieving an energy-efficient building envelope is to focus more on the roof. Protected membrane roof (PMR) assemblies deliver thermal efficiency and can play a valuable role in a sustainable design strategy. Presented in this course is a review of the components, advantages, ballast options, and design and installation considerations of PMR assemblies.
https://redirect.aecdaily.com/s12209/www.aecdaily.com/course/892901
In the wake of the green movement, combined with rising energy costs, building sustainability has become an important topic. This course examines how foil-faced polyisocyanurate (polyiso) continuous insulation can function as a multiple control layer, providing a building with an air and water-resistive barrier and a thermal control layer. Additionally, this course reviews building codes and standards for meeting the continuous insulation requirements in steel stud building envelope designs, the benefits of using polyiso insulation in wall assemblies, and how polyiso insulation meets NFPA 285 requirements.
https://redirect.aecdaily.com/s1017501/www.aecdaily.com/course/1215283
Single-skin metal roofing systems combine structural efficiency with verified wind, fire, and energy performance. This course examines how panel profiles, substrate metals, coatings, and fastening methods contribute to building durability and environmental performance. Learners explore industry standards, testing protocols, and detailing strategies that support code compliance and optimize long-term results. The program also addresses fabrication quality, installation practices, and warranty provisions that influence life-cycle value and alignment with green building objectives under the LEED® v4.1 Building Design and Construction rating system.
https://redirect.aecdaily.com/s10015/www.aecdaily.com/course/819523
The beautiful gray patina of zinc architectural metal has graced the rooftops of buildings in Europe for hundreds of years. This course examines the sustainable characteristics of zinc as a roofing material, including its 100% recyclability, zero VOC requirement, and low embodied energy production process. The life cycle analysis of zinc is examined, as is zinc’s long-term service life. Various types of roof and wall applications are also discussed.
https://redirect.aecdaily.com/s386533/www.aecdaily.com/course/926557
Learners will receive information about cast stone and how it is made, testing requirements, applications, design recommendations, and how it differs from related materials. Learners will describe appropriate specification, design details of cast stone for architectural applications, and how to determine quality cast stone production.
https://redirect.aecdaily.com/s9572/www.aecdaily.com/course/969550
Underslab moisture is something that designers need to take into consideration in both the design and construction phases of a building project. It can cause many problems for the building and the health of its occupants over the course of its life span; however, if properly addressed during design and construction, many of these issues can be mitigated. This course looks at the different types of moisture movement that exist below the slab, examines solutions for a variety of site conditions, and reviews best practices for managing moisture.
https://redirect.aecdaily.com/s390008/www.aecdaily.com/course/929738
White roofs made of PVC (vinyl) can reflect three-quarters or more of the sun's rays and emit 70% or more of the solar radiation absorbed by the building envelope. Despite protecting and keeping buildings cool in all climates around the world for decades, misconceptions about the energy impact of cool roofs still exist. This course uses the fundamental science behind cool roofs to address alleged issues concerning the performance of cool roof products.
https://redirect.aecdaily.com/s5023/www.aecdaily.com/course/924606
One of the most complex and least understood areas where fire can propagate is at the perimeter of a multistory building. Fire can spread not only from floor to floor via the edge-of-slab/curtain wall intersections but also along the exterior building enclosure where untested, combustible components are often installed. This program outlines best design practices for providing fire protection for building occupants per ASTM E2307 and ASTM E2874.
https://redirect.aecdaily.com/s5147/www.aecdaily.com/course/856360
With the advent of “cool” single-ply roofs featuring heat-reflective exterior surfaces and the use of mechanical attachment, new questions have emerged concerning the internal forces at play within the roofing system, especially in regard to vapor movement and the potential for moisture condensation within the roof. This course reviews the fundamentals of vapor movement in roofing systems, current roof condensation research and the tools available to assess roof condensation. It also provides the building design professional with strategies to deal effectively with moisture movement within the roofing system.
https://redirect.aecdaily.com/s20151/www.aecdaily.com/course/961147
There are a multitude of building envelope products used and a variety of methods taken for achieving energy and building code requirements. Understanding the different roles a product plays in the envelope simplifies its design. In this course, we take a look at the code requirements for buildings classified as IBC Types I–IV, paths to achieving compliance, and the number of roles polyisocyanurate insulation plays in meeting these requirements.
https://redirect.aecdaily.com/s792355/www.aecdaily.com/course/803054
Homeowners are looking for alternatives to traditional cladding materials that are affordable and long lasting and require little or no upkeep. Advances in technology and manufacturing techniques mean cellular PVC cladding products can meet all these requirements without sacrificing aesthetics. This course reviews the benefits of cellular PVC as a cladding material and discusses how cellular PVC rebutted and rejointed (R&R) prefinished shingles can provide the look and feel of wood shingles with an extended level of durability and low maintenance.
https://redirect.aecdaily.com/s13907/www.aecdaily.com/course/903646
Concrete-faced insulated products are composite prefinished panels that are used to construct walls and roofing assemblies to maximize the energy efficiency, durability, and performance of a building envelope. This course discusses the design criteria used in designing energy-efficient buildings using concrete-faced continuous insulation systems for low-slope roofing, walls, and foundations. The functional and physical features of protective membrane roof (PMR) systems, concrete-faced insulated panels for walls and foundations, and concrete structural insulated panels (CSIPs) are evaluated.
https://redirect.aecdaily.com/s18795/www.aecdaily.com/course/787410
A sound building envelope should be sustainable and provide fire resistance, good thermal performance, and protection from the elements. Mineral wool, fire rated insulated metal panels (IMPs) can improve building performance and contribute to a sustainable design strategy. Included in this course are discussions on mineral wool IMP characteristics and design options, performance advantages, and installation considerations. The course details how fire resistance is specified in the International Building Code and provides examples of fire wall and fire partition construction assemblies.
https://redirect.aecdaily.com/s5759/www.aecdaily.com/course/1030625
Metal roof and wall systems have long been specified for commercial, residential, and industrial buildings because they have a lengthy history of durability, reliability, and resilience. This course examines the attributes of metal panel systems and the design options that make metal-clad buildings sustainable, attractive, and suitable for a variety of applications and environmental conditions.
https://redirect.aecdaily.com/s5147/www.aecdaily.com/course/856363
Standing seam metal roofing has been used successfully in the United States for centuries, and proper specification is key to realizing its intended performance. Examined here are: the factors driving the demand for standing seam metal roof and wall systems; standing seam panel basics; gauge and grade; oil canning; specification considerations; testing standards; and forming, delivery, storage, handling and warranty.
https://redirect.aecdaily.com/s789181/www.aecdaily.com/course/990198
Concrete is an essential part of modern buildings. As net zero energy buildings become more common, it is crucial to find ways to reduce concrete’s carbon footprint without losing the performance characteristics that make it valuable to the building team. This course explains the sources of concrete’s carbon footprint and explores strategies for reducing embodied carbon and operational carbon in precast sandwich wall panels and insulated architectural cladding.
https://redirect.aecdaily.com/s987165/www.aecdaily.com/course/1043405
Wind forces always influence building design and detailing. This course focuses on one particular force, wind uplift, and its influence on roof paving system design and selection. It examines how wind loads and building configuration affect the design of roof paving systems; the codes, regulations, and calculation approaches that inform and control such designs; and the various options designers can use to design safe, appealing outdoor roof paving systems that will withstand even the strongest winds.
https://redirect.aecdaily.com/s904648/www.aecdaily.com/course/1065274
This course is designed to help the commercial building team understand how to best use new products introduced into the market for building enclosures. These innovative products and systems assist in combining multiple steps of a traditional commercial exterior assembly, such as structure, fire, water, air, thermal, vapor, and acoustic control layers, into fewer steps. The course reviews various hybridized sheathing solutions and shows how the integration of advanced technology has improved performance, capability, and sustainability.
https://redirect.aecdaily.com/s12394/www.aecdaily.com/course/1153611
Composite roofing materials have been available for over a decade, providing a cost-effective alternative to traditional slate and shake roofing systems. In this course, design professionals can thoroughly explore the sustainable and versatile characteristics of composite roofing solutions. Also discussed are the benefits of composite roofing systems, such as their long life cycle, durability, and adaptability for various applications and environments.
https://redirect.aecdaily.com/s661094/www.aecdaily.com/course/686311
Assesses the urban environmental issues of stormwater runoff and heat islands and describes how their damaging impacts can be mitigated by blue, white, and green roofs. The considerations and additional benefits of each roof type are also discussed.
🍪 We use cookies to offer you a better browsing experience, analyze site traffic, personalize content, and serve targeted advertisements. Read about how we use cookies and how you can control them by clicking here. Click "cookie settings" to adjust your preferences.
