Health, Safety, and Welfare
All courses identified as HSW, cover Health, Safety, and Welfare topics and have been approved by the AIA (American Institute of Architects) as an HSW Learning Unit (LU/HSW).
Displaying 76 - 100 of 530 results.
FIRST PREV [26-50] [51-75] [76-100] [101-125] [126-150] NEXT LAST
According to the U.S. Centers for Disease Control and Prevention (CDC), handwashing is one of the best and easiest ways to prevent the spread of germs. However, drying hands is just as important as washing them. This course introduces the reader to the main features of air knife hand dryers and discusses how their technical components, such as high-efficiency particulate (HEPA) filtration, touch-free operation, and fast dry times, contribute to their hygienic performance.
https://redirect.aecdaily.com/s485236/www.aecdaily.com/course/1010952
This course contains sustainable design information. See the course details page for more information.
This course contains accessible design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
With limited exceptions, the International Building Code® (IBC®) requires testing and compliance with NFPA 285 for exterior wall assemblies of buildings of Types I, II, III, and IV construction containing foam plastic insulation. This course examines three methods for demonstrating that an exterior wall assembly design complies with NFPA 285, including engineering analysis. The course also discusses how and where to locate NFPA 285 information for each compliance method.
https://redirect.aecdaily.com/s1039189/www.aecdaily.com/course/1089159
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Outdoor decks are commonly desired by homeowners and commercial property owners for both new and existing properties. Wood has long been the structural choice for outdoor deck materials. However, wood has disadvantages that can be mitigated with steel deck framing structural construction. In this course, we will discover that light-gauge steel (LGS) is lighter in weight than structural wood, is less susceptible to deterioration due to the elements and pests, requires less maintenance over time, is a sustainable material, and offers unparalleled safety features for dead loads, live loads, and environmental loads such as snow, earthquakes, and wind. Steel deck framing is quick to erect and provides for longer spans than wood of similar cross-sectional size. Structural materials can be easily lifted, and waste is reduced.
https://redirect.aecdaily.com/s555712/www.aecdaily.com/course/972529
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
With the global rise in natural disasters and the increasing need for sustainable environments, resiliency has become a necessity in the design and building industries. This course provides an overview of resilient design, how it relates to building codes and standards, and the role it plays in ensuring the safety and sustainability of the built environment. It examines the role masonry construction plays in meeting resilient design goals and the inherent properties of masonry that make it resilient and provides examples and case studies of resilient design strategies.
https://redirect.aecdaily.com/s7816/www.aecdaily.com/course/1073772
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The 2022 Inflation Reduction Act shines a light on how low-carbon building material selection is one of the keys to reducing greenhouse gas emissions in the US. High-performance, sustainable products and thoughtful assemblies designed with the building life cycle in mind are critical to the future of our sustainable communities. This course provides a look at how low-carbon and sustainability considerations are activated from product to building design. Factors impacting a sustainable building life cycle are discussed to help architects and owners with building performance that meets the design intent not just on paper but also in use.
https://redirect.aecdaily.com/s904648/www.aecdaily.com/course/1065316
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The importance of handwashing in regard to personal health is well understood, and most people feel they know how to do it properly. However, the places where and methods by which hands are washed are not always as healthy and safe as they should or appear to be. This course outlines the proper handwashing techniques, especially for healthcare and food preparation contexts; explains how germs, viruses, and bacteria are spread and where sanitation problems with sinks may reside; and describes how to select and specify the most appropriate washup, infection prevention, and scrub sinks, countertops, and fitments.
https://redirect.aecdaily.com/s795432/www.aecdaily.com/course/921739
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The potential for scalding from point of use hot water affects all of us. While the very young and the very old are more susceptible, no one is immune from scalding danger. An understanding of the potential for scalding, as well as the physiology of burns from hot water, can guide our design choices and significantly reduce the danger to people using facilities that commonly supply hot water, such as lavatories, baths, and showers. This course discusses the potential for scalding, the physiology of burns due to hot water, and who is most susceptible. It also discusses the relevant codes and the fixtures available to designers that can help reduce scalding and burn potential.
https://redirect.aecdaily.com/s3515/www.aecdaily.com/course/969656
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Concrete is a key construction material in modern society. As the foundation for much of what we make, it has a substantial environmental impact, mainly reflected in its carbon footprint. This course introduces best practices to make concrete more sustainable and lower the embodied carbon in concrete with its use and application.
https://redirect.aecdaily.com/s5654/www.aecdaily.com/course/1091501
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The beautiful gray patina of zinc architectural metal has graced the rooftops of buildings in Europe for hundreds of years. This course examines the sustainable characteristics of zinc as a roofing material, including its 100% recyclability, zero VOC requirement, and low embodied energy production process. The life cycle analysis of zinc is examined, as is zinc’s long-term service life. Various types of roof and wall applications are also discussed.
https://redirect.aecdaily.com/s10015/www.aecdaily.com/course/819523
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Concrete products such as precast pieces, pavers, and terrazzo have long provided builders with a flexible range of options for their projects. Beyond their versatility, these concrete products are highly sustainable, thanks to their ability to be recycled, low carbon footprint, and long life span.
https://redirect.aecdaily.com/s987165/www.aecdaily.com/course/1010278
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Historically, traditional waterproofing methods involve the placement of a barrier or membrane between the concrete and water. Unlike membranes and other surface systems, crystalline waterproofing is designed to make the concrete itself waterproof. This course discusses how crystalline waterproofing technology provides a high level of performance to concrete structures and what design professionals need to know in order to specify and understand how this chemical technology can improve building projects, cut costs, and help earn LEED® credits.
https://redirect.aecdaily.com/s15796/www.aecdaily.com/course/626474
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
This recorded webinar is the third of five sessions presented during the Building Science Master Summit held by DuPont Performance Building Solutions. This course dives into the topic of below-grade thermal performance and how to appropriately design for the long term. It explores heat loss patterns; energy code requirements and how they differ by region and building type; insulating best practices and benefits; and considerations for material selection.
https://redirect.aecdaily.com/s904648/www.aecdaily.com/course/924077
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Power and charging requirements for hospitality facilities are changing radically and rapidly. This course examines the options for and benefits of supplying power and charging outlets in walls, furniture, headboards, nightstands, public seating, and public gathering spaces, including outdoor areas, as well as the applicable codes for furniture-based power outlets. The course concludes with an overview of the benefits of occupancy sensors and auto-off switches in guest rooms and the installation requirements to comply with energy and electrical codes.
https://redirect.aecdaily.com/s525798/www.aecdaily.com/course/1017988
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Low Impact Development (LID) has several advantages over traditional stormwater management approaches. Since impervious pavement is the main source of stormwater runoff, LID strategies recommend permeable paving for hard surfaces. The course discusses LID, its goals and principles, and how they are achieved. It provides an overview of permeable pavements, and more particularly, plastic permeable grid paver systems and how they support LID goals.
https://redirect.aecdaily.com/s705300/www.aecdaily.com/course/883759
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Commercial rolling service doors offer high performance solutions for demanding areas. Used both internally and externally, these doors provide excellent thermal insulation, strength, and durability in challenging environments. This course examines the characteristics of rolling service doors, fire doors, grilles, and shutters. Door operation, parts, fire code requirements, and wind load information are also discussed.
https://redirect.aecdaily.com/s15358/www.aecdaily.com/course/791360
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The trend toward more sustainable, healthy, and energy-conserving enclosures has brought building science and moisture management to the forefront of daily conversation for professionals in the construction industry. In this course, we delve into the science behind current practices and explore the role of building envelopes, optimal wall assemblies, and enclosures in vapor, water, air, and thermal control.
https://redirect.aecdaily.com/s1002402/www.aecdaily.com/course/1036036
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Now more than ever, the environmental impacts of products used in construction are a worldwide concern and one that the architecture and design (A&D) community is being asked to address in their work. Environmental product declarations (EPDs) are powerful tools when choosing materials for commercial projects. This course discusses how, where, and why to use EPDs to inform sustainable product selection and specification decisions and how EPDs are incorporated into key green building rating systems and codes, including LEED® v4.1 Building Design and Construction (BD+C) and Interior Design and Construction (ID+C), Green Globes® for New Construction (NC), and the International Green Construction Code® (IgCC®).
https://redirect.aecdaily.com/s1051417/www.aecdaily.com/course/1061717
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Concrete is the most widely used construction material in the world, second only to water. Over time, as a result of the build-up of atmospheric compounds in the surrounding environment, concrete will become discolored, stained, dirty, and dingy. This course examines photocatalytic technology which accelerates self-cleaning and fights air pollution while maintaining the mechanical and physical properties of traditional concrete.
https://redirect.aecdaily.com/s5654/www.aecdaily.com/course/857200
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Some building parts may see minimal human contact or weathering. Doors and entryways, however, need to be able to stand up to heavy use, frequent direct contact from building occupants, and environmental impacts. In this regard, FRP doors and frames offer robust strength, reliability, and durability. They provide project versatility and customization in colors and textures, are excellent thermal insulators, and allow for easier installation and lower costs in construction projects. This course outlines the FRP door and frame components, manufacturing methods, and types and discusses the benefits of FRP products.
https://redirect.aecdaily.com/s1034450/www.aecdaily.com/course/1060033
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Provides an overview of the noise issues associated with floor/ceiling assemblies of multi-family dwellings, as well as the factors that affect acoustical performance. Also presented is a review of the acoustical solutions that are available with a focus on sound mats with poured underlayment (SMPU) systems.
https://redirect.aecdaily.com/s608556/www.aecdaily.com/course/648415
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Attic ventilation is an important component in proper structural design. By encouraging airflow, attic ventilation plays a key role in maintaining structural integrity, ensuring roof component durability, providing a healthy indoor environment, and minimizing energy consumption. Additionally, proper attic ventilation hinders or prevents mold growth, reduces interior pollutants, and acts as a pivotal fire prevention tool. This course looks at how attic ventilation systems work, the benefits they provide, and the associated building codes and regulations.
https://redirect.aecdaily.com/s20358/www.aecdaily.com/course/1113695
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Wood is both beautiful and practical but lacks long-term durability when used outdoors. Acetylation changes the material properties of the wood at the molecular level to improve its stability and weathering capabilities. This course reviews the acetylation process, its impact on wood performance, and how and where this type of wood can be used. Also discussed are the green features of acetylated wood and how it can contribute toward earning points in the LEED® v4 green building rating system.
https://redirect.aecdaily.com/s445448/www.aecdaily.com/course/1044818
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Fireplaces remain one of the most desirable household features for homeowners, complementing a range of different lifestyles and appealing to a range of demographics. This course provides an overview of electric fireplaces, focusing on their design possibilities, flame technologies, ease of installation, environmental efficiency, cost-saving benefits, and their advantages over gas and wood-burning fireplaces.
https://redirect.aecdaily.com/s4877/www.aecdaily.com/course/697331
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The interior design industry will play a critical role in meeting the challenges of our increasingly changing world. However, the current practice of design is flawed and becoming increasingly marginalized by standard operating procedures. Business-as-usual approaches challenge effective responses to the diverse and evolving needs of humanity. Life happens in all the spaces we create. Without design, the way we experience living and each other would be drastically different. Beyond outcomes and aesthetics, what would reframing design to consider the diversity of our modern world look like? Learn how it would impact our creative processes and representation of "good design." Join the conversation to explore and see our industry through a new lens that will change the way you see design forever.
https://redirect.aecdaily.com/s940949/www.aecdaily.com/course/1113521
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Authorities having jurisdiction all over the world, including in all 50 US states, have mandated photoluminescent egress path markings to support safe evacuation of high-rise buildings in the case of total power failure. This course reviews photoluminescent egress path marking requirements in the model International Building Code® and International Fire Code® (2015, 2018, 2021) and identifies compliant photoluminescent path marking products. The course also discusses recommended best practices that exceed code requirements, which will reduce building operation costs and improve occupant and first responder safety.
https://redirect.aecdaily.com/s1086508/www.aecdaily.com/course/1086515
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
