Light-manipulating materials use internal channels to capture, bend, scatter, and redirect light and create visually stunning spaces. Panels and slabs in resin, glass, and terrazzo make an experiential surface for privacy screens or signage, primary or accent lighting, and countertops or flooring—anywhere the interplay of light and shadow is desired for beauty and inspiration. This course describes the different types of light-manipulating materials and substrates, design and installation options, and the contributions of these products to sustainability goals as well as occupant health, well-being, and engagement in a wide range of dynamic, unique applications.

You can REQUEST a live event at a convenient time and location for you.

There may be additional events available! See the course details page for more information.

Soft flooring has experienced a surge in popularity in recent years due to its aesthetics, lower costs, durability, and ease of care. This course discusses how to create the optimal soft flooring system through proper substrate and surface preparation.

You can REQUEST a live event at a convenient time and location for you.

There may be additional events available! See the course details page for more information.

This course is an introduction to spray foam insulation in commercial construction. Presentation goes into detail on building code requirements, effect on indoor environment, the impact on a building's energy performance and a life cycle analysis of spray foam insulation.

You can REQUEST a live event at a convenient time and location for you.

There may be additional events available! See the course details page for more information.

This course covers the wall assembly thermal performance requirements of current energy codes (both the 2009 and 2012 versions of the IECC are covered). In addition, the course discusses the alternative compliance paths that are available for masonry walls under IECC and ASHRAE, including the use of COMcheck software, and provides an introduction to the basic concepts and terms that are used with respect to thermal performance. Finally the course covers how masonry wall assemblies may contribute credits under LEED.

You can REQUEST a live event at a convenient time and location for you.

There may be additional events available! See the course details page for more information.

An overview of walkable, waterproof roof deck membranes and roofing systems, including a discussion of the key principles of deck design, design considerations, and how to install and specify roof deck membrane systems. This program will be extremely beneficial to architects, specifiers, and contractors involved in single and multiple-family homes that include decks, balconies, and rooftop decks.

You can REQUEST a live event at a convenient time and location for you.

There may be additional events available! See the course details page for more information.

An overview of the effects of water on masonry architecture. Types of masonry water repellents are compared and contrasted. Application methods are discussed. The program ends with a look at treatments for protecting masonry against non-water threats such as oil and graffiti.

You can REQUEST a live event at a convenient time and location for you.

There may be additional events available! See the course details page for more information.

The most important assets in any organization are the people within. When a client decides to invest in physical security, like bullet-resistant barriers, it is the responsibility of AEC community professionals to understand what protection level is appropriate for the building depending upon the surroundings, the industry, and the client’s specific needs and provide a blueprint that includes the desired features while maximizing the building owner’s investment and protecting future occupants.

You can REQUEST a live event at a convenient time and location for you.

There may be additional events available! See the course details page for more information.

Embark on a comprehensive exploration of bamboo as an extraordinary building material in our Sustainable Building with Bamboo and Bamboo-Plastic Composites course. Delve into its historical evolution from ancient structures and uses to modern day contemporary applications, unraveling the unique properties that make bamboo an exceptional choice for sustainable construction and for use in composite materials. This course offers a deep understanding of bamboo's role in shaping environmentally conscious building practices. Join us for a journey through time, scientific intricacies, and real-world applications, as we unveil the potential of bamboo in creating resilient and eco-friendly structures for the modern World.

You can REQUEST a live event at a convenient time and location for you.

There may be additional events available! See the course details page for more information.

Based on published studies, a vented rainscreen assembly provides the following for a wall assembly:

• Effectively drain water that has entered behind the cladding

• Reduces the wet time of absorptive claddings

• Increased drying of the interstitial wall assembly

• Mitigate reverse vapor drive for highly permeable Water Resistant Barrier / Air Barrier (WRB/AB) systems

Learn the current research and field practices on vapor open (permeable), vented rain screen cladding wall assemblies and their impact to mitigate water long-term intrusion and enhance the drying capacity of the building envelope assembly for the life of the building.

You can REQUEST a live event at a convenient time and location for you.

There may be additional events available! See the course details page for more information.

Learn about integrated door systems, sustainability, compliance, and code. Understand the importance of smoke and fire protection in various applications and vertical markets and how with the proper protection from integrated door systems you can save lives.

You can REQUEST a live event at a convenient time and location for you.

There may be additional events available! See the course details page for more information.

Explore alternative stucco lathing and stucco compositions while providing a review of advantages and disadvantages of the various lath products and compare lathing alternatives. In addition the course reviews the essential design details for stucco wall systems and identifies specific challenges of stucco wall systems while reviewing best practices and solutions. In addition Standards and Code compliance of various stucco lathing are explored

You can REQUEST a live event at a convenient time and location for you.

There may be additional events available! See the course details page for more information.

Smart access control and management systems are quickly gaining popularity in multi-family and multi-tenant properties, and the smart lock market is poised for rapid growth both domestically and internationally. Understanding how smart locks work can be advantageous for architects, specifiers, and construction professionals to help their clients design and develop properties with enhanced security, efficiency, and simplicity in access management. Smart locks are quickly moving beyond mechanical functions to create streamlined, efficient lifestyles. This course discusses the technology, features and benefits of smart locks while outlining current trends and options.

You can REQUEST a live event at a convenient time and location for you.

There may be additional events available! See the course details page for more information.

Light-manipulating materials use internal channels to capture, bend, scatter, and redirect light and create visually stunning spaces. Panels and slabs in resin, glass, and terrazzo create an experiential surface for privacy screens or signage, primary or accent lighting, countertops or flooring—anywhere the interplay of light and shadow is desired for beauty and inspiration. This course describes the different types of light-manipulating materials and substrates as well as the design and installation options for a wide range of dynamic, unique applications.

You can REQUEST a live event at a convenient time and location for you.

There may be additional events available! See the course details page for more information.

This course discusses the uses, manufacturing process, performance characteristics, selection considerations, and proper installation techniques of commercial graphics.

You can REQUEST a live event at a convenient time and location for you.

There may be additional events available! See the course details page for more information.

This course discusses the unique considerations when installing pre-applied/blindside waterproofing for below grade waterproofing applications. It reviews the science behind any below grade waterproofing project but with a focus on pre-applied or “blindside” waterproofing best practices – including looking at the different product types and design considerations, as well as the pre-planning, decision making, and application techniques that these demanding waterproofing projects require.

You can REQUEST a live event at a convenient time and location for you.

There may be additional events available! See the course details page for more information.

This program introduces building retrofits as a method to achieve green building standards by adapting existing structures. While a building retrofit may have several types of interventions, participants will learn how effective air sealing will improve overall occupant comfort, health, and safety. This includes a detailed look at sources of air leakage and the various methods to address this infiltration. Several real-world examples will demonstrate the importance of identifying source of air leakage, investigating existing conditions, and proper detailing.

You can REQUEST a live event at a convenient time and location for you.

There may be additional events available! See the course details page for more information.

In this webinar, David Ray, a former Project Manager & Designer turned Implementation Service Manager at Revizto, will share how an Integrated Collaboration Platform, can help streamline your design coordination process, eliminate manual reports, centrally track and record all markups and issues to completion, and communicate effectively and efficiently from any device - even without an internet connection.

You can REQUEST a live event at a convenient time and location for you.

There may be additional events available! See the course details page for more information.

This is a Product SpotLight Presentation.

SOPRANATURE TOUNDRA BOX combines all the necessary components of a green roofing system into a modular tray. Each tray includes built in drainage slots, filter fabric, growing medium and pre-grown plants protected by a removable retention frame. Suitable for both small and large surfaces, these lightweight, easy-to-carry trays are easily assembled in minutes to create an instant green roof.

You can REQUEST a live event at a convenient time and location for you.

There may be additional events available! See the course details page for more information.

Discover the endless possibilities of custom access hatches, fire rated roof hatches, sliding access solutions, and skylights through captivating and engaging multimedia content, and a mesmerizing virtual reality experience.

You can REQUEST a live event at a convenient time and location for you.

There may be additional events available! See the course details page for more information.

Dive into the intersection of design excellence and environmental responsibility with our comprehensive course on TFL decorative panels. Explore the intrinsic value of sustainability in the design world, unravel the complexities of the carbon cycle, and uncover how forests and wood play pivotal roles in carbon sequestration. Discover the versatile applications and climate-positive attributes of TFL panels, empowering you to make informed, eco-conscious choices in your design projects. Join us to elevate your understanding of exceptional design, durability, and sustainability, and contribute to a greener, more resilient future.

You can REQUEST a live event at a convenient time and location for you.

There may be additional events available! See the course details page for more information.

The use of sliding doors in commercial applications is increasing at an exponential rate as facilities embrace the ability to reclaim previously unused space and create wider paths of travel. This course is designed to provide architects, designers, and specifiers with a comprehensive understanding of sliding door locking solutions in commercial spaces and the role of door hardware in ensuring safety, security, and accessibility. By analyzing case studies and exploring the features and benefits of sliding door locking solutions, participants will be able to make informed decisions when specifying sliding door systems for commercial spaces.

You can REQUEST a live event at a convenient time and location for you.

There may be additional events available! See the course details page for more information.

Doors and hardware make up 1%-2% of the entire cost of a construction project yet create more than 20% of the problems. In this presentation you will learn how Integrated Door Opening Assemblies can prevent or mitigate these problems. And use integrated opening assemblies to make smoke and fire control more effective. Course has been updated with current code and application information.

You can REQUEST a live event at a convenient time and location for you.

There may be additional events available! See the course details page for more information.

Access control systems are used to limit entry into designated secure areas to certain personnel during predetermined time periods. In this one-hour course, we will review electrified door locking hardware and related components which interface with electronic access controllers to provide a complete security solution.

You can REQUEST a live event at a convenient time and location for you.

There may be additional events available! See the course details page for more information.

This introductory course is designed to educate all attendees on the most common types and configurations of multi-family buildings. In addition, each attendee will gain access to common manufacture details associated with Multifamily work and how to properly size engineered wood products. Two methods of design will be reviewed, specific manufacture literature as well as software that is available by all manufactures and third-party sources.

You can REQUEST a live event at a convenient time and location for you.

There may be additional events available! See the course details page for more information.

Maximizing Envelope Performance with IMP-Integrated Components explores an advanced insulated metal composite panel building envelope system, components that have been engineered to integrate with the system - including windows, daylighting panels, sunshades, and louvers - and how the IMP system and integrated components combine to create a high-performance building envelope.

You can REQUEST a live event at a convenient time and location for you.

There may be additional events available! See the course details page for more information.