American Institute of Architects

As the largest design organization in the world, AIA is working to transform the day-to-day practice of architecture to achieve a zero-carbon, resilient, healthy, just, equitable built environment, for everyone.

Click to Learn More About the AIA

Visit www.aia.org and Join Now!

Displaying 501 - 525 of 621 results.

FIRST PREV [451-475] [476-500] [501-525] [526-550] [551-575] NEXT LAST

  • ( ~ 1 hour, 15 minutes ) 

    The US has the highest incarceration rate in the world, and with recidivism rates as high as 75% within five years, the prospects for released inmates are dim. There is no simple solution to these issues, but one approach is to focus on rehabilitation to help inmates reintegrate successfully into society upon release. This course looks at the role evidence-based building design can play in a rehabilitative environment that promotes healing, autonomy, and growth. Design strategies are presented with a focus on ADA-compliant, ligature-resistant plumbing products and water management systems that support a clean, safe, secure, rehabilitative environment.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Daylighting is the controlled admission of natural light into a building. It takes into consideration both direct and diffuse sunlight and reduces use of electric light, thereby decreasing energy costs. By controlling daylight, solar heat gain can be minimized, lowering the demand on HVAC systems. This course evaluates a variety of daylighting strategies for commercial applications and includes discussions about the relevance of daylight factor calculations and the impact fabric characteristics have on a shading solution.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Various control strategies are used to prevent rain from penetrating a building envelope and entering a building assembly. This course compares exterior wall metal cladding systems and takes an in-depth look at the design options, testing, specifications, environmental implications, and the detailing of single-skin metal panel systems as used in a pressure-equalized rainscreen (PER) application.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Underslab moisture is something that designers need to take into consideration in both the design and construction phases of a building project. It can cause many problems for the building and the health of its occupants over the course of its life span; however, if properly addressed during design and construction, many of these issues can be mitigated. This course looks at the different types of moisture movement that exist below the slab, examines solutions for a variety of site conditions, and reviews best practices for managing moisture.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Creating a quieter, more comfortable building starts with a focus on windows and doors, the weakest links in the building envelope for sound transmission. This course covers the elements of sound, the metrics used to measure sound attenuation, and the glazing and installation options best suited for an effective sound control strategy.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Bathing facility code compliance does not have to result in an institutional look. Assisted living and healthcare facilities, hospitality installations, universities, multifamily buildings, and large commercial projects all have unique demands, and most require barrier-free, ADA, UFAS, ANSI, California Title 24, or Massachusetts compliant bathing and showering facilities. This course provides an overview of intelligent design solutions that simultaneously address these code requirements and the aesthetic and functional demands of each situation.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Thermal modification is a tried and tested process for increasing the durability of wood while maintaining a warm aesthetic in building design. This course examines all aspects of this sustainable wood product and how it can be incorporated into a variety of projects.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    This course explores how airborne and structureborne noise affects building acoustics and impacts occupant focus, learning, healing, and overall well-being across offices, educational facilities, healthcare environments, and fitness spaces. Participants gain a foundational understanding of sound behavior, testing methods, and common misconceptions and learn how mass, resiliency, and decoupling are integrated into construction assemblies to achieve effective noise control and acoustic performance, in alignment with the LEED® v5 Building Design and Construction and Interior Design and Construction rating systems and the WELL Building Standard™ v2.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Color is often used functionally across many design elements; this can also be done with concrete by simply dosing standard concrete mix designs with pigment. Using pigment, concrete can be transformed from a plain, common material into a beautiful, sustainable, and enduring building element. Adding pigments to concrete elevates a project's quality and impact. This course presents basic knowledge of how concrete pigments are manufactured and how they are measured and dispensed to produce the desired color hue and intensity capable of elevating a project to the next level.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Greenhouses are used in an array of applications from residential to commercial, institutional, or educational. This course describes the glazing options, accessories, environmental controls, and planning considerations that contribute to a successful greenhouse. Also presented are the configuration options and decorative details that make each greenhouse unique and ideally suited for its purpose.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Bicycling is a healthy activity that improves cardiovascular health and reduces obesity and disease. It can be an excellent mode of transportation for people of all ages. Biking is increasingly becoming the first choice as an alternative means of transportation, but bicycles require safe and secure storage. This course discusses bicycle parking options that meet security, durability, and aesthetic standards.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Single-family attached residences (residences that share one or more walls between neighbors) are required to utilize area separation walls between units. A key design criterion of any firewall—besides its fire rating—is that it be structurally independent in a fire. This course evaluates two-hour fire-resistance-rated walls used in single-family attached and multifamily residential construction, the options available in today’s marketplace, firewall installation requirements, and fire-resistance testing.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    Unfortunately, gun violence is a reality, and design strategies must be employed to ensure a suitable level of protection and safety. This course addresses bullet-resistant fiberglass composite panels and the need for architectural armoring. The course discusses ballistic material testing and standards, the types of ballistic materials available, and fiberglass composite panel applications and installation considerations.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    There is an extremely wide array of coated or composite fabrics available on the market, each type formulated for specific uses and with different levels of performance and quality. To assist in the decision-making process, standards have been developed to show product performance, facilitate quality control, and assure designers that the product they are specifying is suitable for normal commercial use. This course briefly outlines the history, properties, and uses of coated fabrics, the intent and content of one coated fabric standard, and the testing protocols that support it.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Marine and waterfront environments expose exterior walking surfaces to moisture, ultraviolet radiation, temperature variations, and repeated wetting cycles that affect durability, safety, and maintenance planning. This course examines how composite decking systems perform under these conditions and how specification decisions influence long-term resilience and environmental performance. These considerations support alignment with green building objectives under LEED® v5 Building Design + Construction and SITES® v2.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Roofing technologies have come a long way from labor-intensive BUR systems that achieved watertightness through redundancy. Today’s single-ply membranes are thin, light and reliable, and installation is safe and efficient. This course focuses on thermoplastic single-plies, particularly those that are PVC based, and explores their benefits and limitations as well as the important factors to consider when selecting a roof system, ranging from fastening techniques to warranties to sustainability.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Leading aluminum extrusion manufacturers have established a variety of methods pertaining to material grade, surface protection, and component solutions to maximize the benefits of aluminum to suit a wide variety of applications. These advancements in technology have led to the development of sustainable wood-patterned aluminum products designed for exterior and interior applications. This course focuses on how these products can be used as a beautiful, high-performance, durable alternative for real wood in a range of applications, including screens, facades, decking, fencing, gates, cladding, and more.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    People are captivated by birds, and for many, they hold intrinsic value. However, millions of birds collide with glass every year, significantly impacting avian populations. This course examines the ecological services that birds perform that impact human wellness and safety and reviews how bird-friendly glass can mitigate collisions. Various bird-friendly glass examples are also identified, and design guidelines and existing legislation mandating bird-friendly buildings is discussed.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    As the market continues to transform the way sustainable buildings are designed, single-skin metal roof and siding products are at the forefront of contributing to healthier built environments. This course breaks down the material inputs and sustainable attributes of single-skin metal roof and siding panels and includes an overview of how the panels can contribute toward earning several LEED ® for Building Design and Construction credits in v4.1.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    Louvers are an essential part of every HVAC system, facilitating appropriate airflow and inhibiting unwanted penetration by water, snow, or debris through wall openings and into HVAC ductwork. However, they can have other purposes. Their simple design makes them a versatile addition and a unique style option to any project. This course presents the types, components, and applications of louvers, along with the primary specification considerations when selecting a louver solution.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Water management is a complex and significant process affecting all levels of planning and building design and is tasked with solving a number of new and emerging issues. This course reviews current stormwater and wastewater management issues and current practices and then takes a look at a number of new and emerging issues that water management plans need to address.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    Specifying door products that are durable enough to withstand the rigorous demands of high-traffic applications in the healthcare and hospitality industries is crucial to the long-term success of each installation. This course reviews traditional doorway materials and doorway protection options, and provides design solutions that utilize engineered polyethylene terephthalate (PETG) components that extend the life of the door assembly and minimize health and safety issues for the building occupants.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    The United Nations has set 2030 as the deadline for member nations to achieve the 17 Sustainable Development Goals. The construction industry has set complementary goals, including the AIA 2030 Commitment to reach net zero emissions in the built environment by 2030. This course discusses how circular economy building products are necessary to achieve sustainable design goals and presents the case study of Kohler WasteLAB, a small manufacturing business within Kohler Company that creates beautiful products for the home from waste.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    This course introduces architects to the fundamentals of acoustic design and its impact on occupant comfort, communication, and well-being. Participants will explore acoustic principles, including reverberation time, sound absorption, diffusion, and sound blocking, as well as key performance metrics such as noise reduction coefficient (NRC), sound transmission class (STC), and ceiling attenuation class (CAC). The course demonstrates how acoustic systems can be integrated into wall and ceiling designs to support functional, aesthetic, and sustainability goals, including those aligned with the LEED® v5 Building Design and Construction and Interior Design and Construction rating systems and the WELL Building Standard™ v2.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Vertical-lift doors and windows enhance the functionality and convenience of many types of spaces, and when offered with an array of innovative customization options, the result is a unique, aesthetically pleasing opening that can transform any residential or commercial design. This course reviews the types of openings and lifting systems, safety features, and design options. Also addressed are the sustainability benefits that can contribute toward credit fulfillment in the LEED® v4.1 Building Design and Construction and Interior Design and Construction rating systems, as well as in the WELL Building Standard™ v2.

    Ask a Question
    SAVE FOR LATER

Displaying 501 - 525 of 621 results.

FIRST PREV [451-475] [476-500] [501-525] [526-550] [551-575] NEXT LAST