Ordre des architectes du Québec
Ordre des architectes du Québec - https://redirect.aecdaily.com/s18122/www.oaq.com
Displaying 476 - 500 of 578 results.
FIRST PREV [426-450] [451-475] [476-500] [501-525] [526-550] NEXT LAST
Beyond aesthetics, ventilated façades and cladding systems provide added wind load absorption, moisture protection, and insulation properties, resulting in prolonged building durability and sustainability. This course examines how these systems benefit occupant well-being by mitigating exterior noise transmission, offer significant building operating energy savings from decreased HVAC demands, and increase occupant comfort by regulating interior temperatures. Mechanical and chemical adhesive attachment is also examined, focusing on the adhesive’s ability to absorb wind-induced vibration as well as expansion and contraction from temperature and humidity changes. Several case studies are also discussed.
https://redirect.aecdaily.com/s2580/www.aecdaily.com/course/1048719
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Expansion or modification of electrical cabling is rarely considered yet occurs during the lifetime of most buildings. Expansion of in-wall cabling requires additional work, trades, and possibly electrical service interruption, but cable tray facilitates removal and addition of cabling. This course reviews two types of cable tray—ladder tray and wire mesh tray—their components, characteristics, and applications and code-related installation information.
https://redirect.aecdaily.com/s525798/www.aecdaily.com/course/551827
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The operation of mechanical equipment generates vibration and noise, which, if left untreated, can damage the building structure and the equipment itself and be a source of discomfort for building occupants. This course examines HVAC equipment vibration and the specification of isolation solutions. It provides discussions on each of the ASHRAE isolator and base types and describes some acoustical floor treatments.
https://redirect.aecdaily.com/s14798/www.aecdaily.com/course/1045296
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Concrete is a key construction material in modern society. As the foundation for much of what we make, it has a substantial environmental impact, mainly reflected in its carbon footprint. This course introduces best practices to make concrete more sustainable and lower the embodied carbon in concrete with its use and application.
https://redirect.aecdaily.com/s5654/www.aecdaily.com/course/1091501
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Innovative and sustainable, powder-coated/sublimated extruded aluminum products are ideal for exterior, interior, and high-traffic architectural applications. Reviewed in this course is an overview of the properties and finishing processes of this material along with discussions of its applications, design criteria, and testing standards.
https://redirect.aecdaily.com/s928136/www.aecdaily.com/course/942139
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Thermal modification is a tried and tested process for increasing the durability of wood while maintaining a warm aesthetic in building design. This course examines all aspects of this sustainable wood product and how it can be incorporated into a variety of projects.
https://redirect.aecdaily.com/s936437/www.aecdaily.com/course/948026
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
A high-performance building must address four major environmental loads: water, air, vapor, and thermal. The location of the required control layers is critical to effective envelope design. This course explores perfect/universal wall design and the use of single-component insulated metal panels (IMPs) to provide all four control layers. Presented here are discussions on the building envelope, rainscreens, perfect wall design, and IMPs, and more specifically, how to incorporate IMPs into engineered façade systems.
https://redirect.aecdaily.com/s9727/www.aecdaily.com/course/846064
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
In commercial, industrial, and parking structures, it is important to use doors that can provide speed, safety, separation, and security. High-performance roll-up doors provide all these elements better than conventional doors. This course provides an in-depth discussion of the different types of high-performance doors—fabric, rigid, and rubber—along with their benefits and functions in different applications. The design and installation considerations for using these doors are also discussed.
https://redirect.aecdaily.com/s12474/www.aecdaily.com/course/926173
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Solid surface material is a durable and sustainable solution for custom architectural solutions. Explore the extensive design possibilities of this nonporous, thermoformable material and review key performance characteristics and fabrication guidelines.
https://redirect.aecdaily.com/s1078641/www.aecdaily.com/course/1083010
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
ICF construction is cost effective and sustainable, and is a superior way to build stronger, quieter, healthier, and more energy-efficient commercial structures. This course explores insulated concrete form (ICF) construction, describing the forms themselves and their construction, performance, and sustainable benefits. Also presented are design guidelines, the installation process, flooring systems, and commercial project applications.
https://redirect.aecdaily.com/s20141/www.aecdaily.com/course/925265
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Metal roof and wall systems have long been specified for commercial, residential, and industrial buildings because they have a lengthy history of durability, reliability, and resilience. This course examines the attributes of metal panel systems and the design options that make metal-clad buildings sustainable, attractive, and suitable for a variety of applications and environmental conditions.
https://redirect.aecdaily.com/s5759/www.aecdaily.com/course/1030625
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Highly customizable electric heating solutions can provide either the main or supplemental heat for most indoor and outdoor spaces. Such solutions can harmonize beautifully with every architectural context and building configuration while addressing the full range of health, safety, comfort, and energy efficiency issues facing contemporary designers. This course examines the many supplemental electric heating solutions and devices available, their capabilities and configuration options, and how they can be customized to suit every unique architectural and engineering demand. It concludes with several illustrated cases.
https://redirect.aecdaily.com/s9351/www.aecdaily.com/course/978473
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Unwanted sound can become more than a mere annoyance. Excess noise has been found to increase stress and distraction, reduce learning and productivity, and even lead to hypertension and permanent hearing loss. This course presents an overview of how sound is described and measured and describes the many industrial and architectural products available to control noise in virtually any environment.
https://redirect.aecdaily.com/s14798/www.aecdaily.com/course/869959
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
With the ever-increasing focus on the sustainable built environment, building owners, architects, engineers, and contractors are incorporating structural steel into their designs. Presented here is a comprehensive view of the cradle-to-cradle structural steel supply chain from a sustainability perspective. Also discussed are steel production and design, steel’s potential contribution to LEED v4 credits, thermal capacity, and the environmental and life cycle benefits of prefabricated fireproof steel columns.
https://redirect.aecdaily.com/s753464/www.aecdaily.com/course/844146
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Health, safety, and welfare remain fundamental aspects of building design practices. The principles of limiting risk through openings and the creation of safe separation distances remain fundamental to fire-resistive building design practices and the basis for modern model building codes. Incorporating fire-rated glazing products provides creative design options that adhere to current code. This course establishes the differences between fire-protective and fire-resistive glazing products and their proper applications, as well as the related test standards and current building code requirements for specifying architectural fire-rated glazing.
https://redirect.aecdaily.com/s148963/www.aecdaily.com/course/1036809
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Surface design and color impact people in one way or another. Why do some surroundings induce a sense of calm, happiness, or inspiration while others offer nothing but distraction, discomfort, chaos, doom, and gloom? Interior surfaces are the point of contact between users and their environment, as well as an important connection between the visual and physical worlds. This course examines the integral role that surface color and design play in interior spaces and how color and design can improve health, reduce stress, enhance safety, and promote well-being in building occupants. Key requirements in the selection and specification process are also discussed.
https://redirect.aecdaily.com/s15612/www.aecdaily.com/course/892139
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Today—as climate change, population growth, and record droughts present an unprecedented strain on our water supply—conservation technology is building awareness to the importance of having the most water efficient fixtures in a home or business. This course recognizes the flush toilet as one of the biggest users of water and discusses how toilet design is pushing flush technology to develop ways for homes and commercial buildings to conserve water without sacrificing the performance of the toilet. Industry testing protocols and the water-saving capabilities of different technologies are evaluated.
https://redirect.aecdaily.com/s10412/www.aecdaily.com/course/781762
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
In recent years, the inclusion of wine cellars has become a hallmark of luxury and upscale housing, extending beyond individual homes to multifamily residences, bars, private clubs, and restaurants. This course is a practical guide for architects, designers, general contractors, and engineers on building attractive, efficient, and highly functioning wine cellars that successfully integrate technical requirements with design intent.
https://redirect.aecdaily.com/s1078631/www.aecdaily.com/course/1094744
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
When designing noise control measures for a building, it is critical to look beyond the sound transmission class (STC) and impact insulation class (IIC) ratings in order to create an ideal environment that promotes occupant well-being, protects their hearing, and fulfills the project’s needs. This course provides an overview of noise control principles, construction composites, and design methodologies that reduce noise, with an emphasis on performance-oriented designs requiring third-party acoustical consultants.
https://redirect.aecdaily.com/s14798/www.aecdaily.com/course/1059306
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Secret doors and spaces have been used throughout history to protect valuables, hide people, conceal activities, and provide amusement. This course examines some historic examples before discussing contemporary uses for hidden doors and rooms. Suggested design strategies and hardware specifications are discussed, and safety guidelines, common design mistakes that might expose the existence of a secret door, and some inspirational case studies are reviewed.
https://redirect.aecdaily.com/s13254/www.aecdaily.com/course/1047947
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Rooftop decks create valuable living and recreational space for building owners, residents, and clients. Accommodating restaurants, hotels, healthcare facilities, and everything from residential to government buildings, rooftop deck systems offer the design flexibility to create versatile, unique outdoor spaces over any structural surface. This course explores the features, surface materials, and design options for rooftop deck systems and provides an overview of recommended planning and installation guidelines.
https://redirect.aecdaily.com/s17339/www.aecdaily.com/course/829062
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Glass doors, windows, and storefronts are among the most vulnerable points of entry in the building envelope, and with episodes of riots, smash-and-grab crime, forced entry, and active shooters on the rise, the need for security glazing is growing. This course provides an understanding of the physical security needs of the built environment and what requirements should be met by threat mitigation products for existing storefront and building glazing. The course focus is on a new generation of clear, retrofit security “over-glaze” systems, utilizing heavy-gauge, architectural-grade polycarbonate and extruded framing designed to resist forced entry and ballistic attacks.
https://redirect.aecdaily.com/s921796/www.aecdaily.com/course/948703
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The United Nations has set 2030 as the deadline for member nations to achieve the 17 Sustainable Development Goals. The construction industry has set complementary goals, including the AIA 2030 Commitment to reach net zero emissions in the built environment by 2030. This course discusses how circular economy building products are necessary to achieve sustainable design goals and presents the case study of Kohler WasteLAB, a small manufacturing business within Kohler Company that creates beautiful products for the home from waste.
https://redirect.aecdaily.com/s8547/www.aecdaily.com/course/1109758
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
As the market continues to transform the way sustainable buildings are designed, single-skin metal roof and siding products are at the forefront of contributing to healthier built environments. This course breaks down the material inputs and sustainable attributes of single-skin metal roof and siding panels and includes an overview of how the panels can contribute toward earning several LEED® for Building Design and Construction credits in v4.1.
https://redirect.aecdaily.com/s719/www.aecdaily.com/course/1020058
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Natural light is important in everyday life, with positive effects on one's health, well-being, and productivity. This course provides an understanding of how automated high-performance shades can provide more natural light. Current market drivers and their effects on a building's value are also discussed. The course explores how to increase visual and thermal comfort by automating the balance of natural and artificial light and outlines the role of high-performance shades in meeting sustainability standards. This course also discusses the influence of automated façades on a building’s performance.
https://redirect.aecdaily.com/s13235/www.aecdaily.com/course/949054
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
