In this course, attendees will learn how to design walls that optimize performance for project requirements in a cost-efficient way. The course discusses initial cost and operating cost implications of exterior wall system choices. The course also discusses options to provide interior walls that save money and provide exceptional performance for demanding interior environments.

You can REQUEST a live event at a convenient time and location for you.

There may be additional events available! See the course details page for more information.

This course covers how to use the advantages of concrete masonry for the construction of detention facilities.

Wall stabilization, seismic retrofits, and helical beaming are just a few of the topics covered. With engineers on staff, PROSOCO works hand-in-hand with engineering and design teams to develop custom anchoring solutions and strategies for both new construction and restoration projects.

This course will concentrate on the Masonry QA/QC programming established in MSJC 402/602 and the importance of Pre-Bid meetings, correct scope of work and Mock Up Panels. The sole intent of the course is to ensure the owner, designer and contractor have their expectations met on the installation of masonry on their project without sacrificing the health and safety of a project from construction through occupancy. So many potential problem areas can be addressed prior to installation that can be alleviated during precon activities.

Provides an overview of the uses and benefits of water repellent concrete masonry admixtures in concrete masonry units and masonry mortar. The evolution of water repellent chemistries that enable single wythe building design is discussed including the innovative use of low-dosage, high-efficiency admixtures in the CMU and powdered admixture for preblended mortars. Context is provided on masonry building details and application of best practices by masons in the field.

This presentation originates from a research report written by the Applied Building Technology Group called Assessment of Water Vapor Control Methods for Modern Insulated Light-Frame Wall Assemblies. The report is extensive and includes compiled data from test homes, huts, and studies from the US, Canada, and Europe. The presentation utilizes the collected data from the research report in the form of a table to make easy insulation choices to prevent moisture issues. This presentation will first present the Building Science Concepts one needs to understand why things happen the way they do. The attendee will then be able to use that information to make informed decisions on how to design with wood framed construction. The presentation also breaks down some of the findings about wood sheathing and how it has been standing up over the years.

This course covers the aesthetic choices available to designers with concrete masonry, including colors, textures, scale and contours, and the best approach to the specification and construction process to achieve desired results. The course discusses how to add cost-effective aesthetic details by using specialty face designs. Finally, the course discusses considerations for using veneers or single wythe concrete masonry units.

You can REQUEST a live event at a convenient time and location for you.

There may be additional events available! See the course details page for more information.

An overview of the effects of water on masonry architecture. Types of masonry water repellents are compared and contrasted. Application methods are discussed. The program ends with a look at treatments for protecting masonry against non-water threats such as oil and graffiti.

You can REQUEST a live event at a convenient time and location for you.

There may be additional events available! See the course details page for more information.

A comprehensive plant tour at our Rmax Facility. Observe the insulation manufacturing process step by step from the initial order to the finished product by observing the raw material used, the manufacturer of the panels on the production line, panel cutting and stacking, panel wrapping and storage.

Discuss precast concrete products, aesthetic options, prefabrication, and safety benefits specifically for K-12 schools.

You can REQUEST a live event at a convenient time and location for you.

There may be additional events available! See the course details page for more information.

This presentation will focus on the changes from LEED 2009 to LEED v4.1 with information on masonry as it relates to the provisions of LEED.

Mortar used in the installation of commercial masonry projects must meet rigorous standards and precise requirements for use in the field. This presentation will discuss the composition of mortar and detail the different ASTM standards. For the architect and design professional, understanding the nuances of mortar as well ways to conduct a successful field test, is critical to a successful project completion which will help mitigate any potential challenges including water intrusion and wall strength.

This course focuses on how to use innovative concrete masonry products for the construction of retail facilities. Single wythe masonry walls are studied as a cost-effective option. The course compares the cost and performance of common wall assemblies for store construction, including their ability to meet the requirements of recent versions of the IECC. The course also highlights aesthetic detailing options, such as the use of specialty units for accent bands or window sills. Finally, the course covers the use of specialized coated masonry systems for areas requiring durable cleanable surfaces.

This course describes both the history and current use of sculptural architectural concrete masonry veneers. Participants will learn the historical evolution and development of sculptural concrete masonry veneers and their current possibilities. The course covers how to design and construct sculptural veneers to address moisture management and crack prevention, and identifies key installation and workmanship considerations. Finally, the course addresses how to use kits of sculptural concrete masonry veneers in combination to build durable, resilient, and environmentally beneficial surfaces that create visually appealing spaces that provide a creative environment for building occupants and visitors.

This course discusses the keys to successfully designing details for single wythe concrete masonry buildings, with a focus on moisture control, energy conservation, structural performance, and aesthetic opportunities.

An overview of how masonry exteriors have changed since 1949, and the challenges and procedures involved in cleaning them correctly.

You can REQUEST a live event at a convenient time and location for you.

There may be additional events available! See the course details page for more information.

This presentation teaches participants the concrete masonry wall system options available for school construction, compares the performance and cost of concrete masonry vs. framed construction, identifies the safety, security and resilience advantages of concrete masonry, and introduces how coated masonry wall systems can offer benefits for interiors spaces requiring durability or heightened hygienic conditions.

You can REQUEST a live event at a convenient time and location for you.

There may be additional events available! See the course details page for more information.

This course explores the below-grade use of polyisocyanurate (POLYISO) insulation to meet energy code and maximize thermal performance of the building foundation. Let us help dispel the myths that have been created relative to POLYISO insulation while discussing its thermal performance, water absorption, and load capacity – the three primary characteristics for below grade insulation. In addition, we will discuss how the insulation can provide protection for the foundation waterproofing system.

New technology and improvements in masonry veneer installation can help your team save time and money in the construction process while providing superior results. In this course, you'll learn how cutting-edge technology is helping masons move beyond traditional lath and scratch and be introduced to the principles behind masonry veneer installation systems (MVIS). Learn how to create permanent, high-strength installations for residential, commercial, and industrial applications using MVIS with fortified mortars and innovative waterproofing barrier membranes that protect against air and water penetration.

This presentation discusses the manufactured Dry Cast masonry, and contrasts with Wet Cast stone, both in terms of utilitarian benefits, and aesthetics.

This is Masonry 101, what to look for to avoid a bad looking job. But more importantly create a safe healthy and resilient project for your client. Everyone on the jobsite, from the mason contractor to the GC Supervision has eyes on the job. If something doesn’t look right stop that portion of the project and ask a question. We will discuss the important items an Architect should review during regular site inspections.

Many are familiar with the LEED Green Building Rating System, but there are many other options for designers and owners looking to create healthy, environmentally-conscious buildings. In this webinar we will look at two -the WELL Building Standard and the Green Globes environmental assessment program - and how they relate to, and are different from, LEED. Strategies using masonry that can be used to meet requirements in these standards will be highlighted.

Off-site construction practices for commercial projects are growing in popularity because of their ability to combat persistent industry challenges such as weather delays, skilled labor shortages, material availability issues, and price increases. While the benefits to off-site construction are undeniable, the upfront efforts required from the project team can cause apprehension. This learning will take participants on an off-site construction journey leveraging case studies to share firsthand experiences of successful projects that have been able to turn the upfront effort into a wealth of benefits.

A symposium that educates landscape architects on sustainable paving solutions for cities, communities, and campuses. Dr. William F. Hunt, III, PHD, PE from North Carolina State University will be discussing permeable paving benefits and opportunities. This symposium will highlight recent local projects successes using permeable paving to meet these new green infrastructure requirements while illustrating how they can still be functional and aesthetically pleasing. Several case studies will be examined and discussed.

Ensuring compliance with increasingly stringent energy codes is a leading architectural challenge. This course explores the latest edition of the International Energy Conservation Code (IECC) with a focus on the building envelope and how to achieve – and exceed – energy performance requirements when building with masonry.