Cohesive and resilient designs are hard to achieve. This course offers a basic review of “Industry Best Practices” for installation over various sub-straights. Highlighting new code requirements established by the new TMS 402/602 – 22, Chapter 13 for anchored and adhered veneers. We will also review the different finishes available.

This course focuses on how to use and apply specification language and proper construction details to create successful projects that meet the designer's and owner's expectations for color, general appearance, and moisture penetration resistance.

This course covers how to use the COMcheck(TM) software from the Department of Energy to evaluate whether mass walls meet Energy Code requirements.

The use of mortar is a process that has changed little since the days of ancient Greece. Unlike lumber, steel, and other building materials found on today's construction sites, mortar ingredients are typically brought individually onto the site and stored where the masonry work is being done. Then they are shoveled into some form of mixer (manual or powered) to combine the dry ingredients along with a measured quantity of water. The results have been quite understandably dependent on the quality of the ingredients used, the skills of the people doing the portioning and mixing, and the outdoor environmental conditions' all variables that can and have produced quite variable outcomes in terms of mortar quality and performance. In our current time, there are some well-documented conditions that also come into play. Shortages of skilled construction labor means that it is uncertain how precisely the mortar is being mixed on-site. At the same time, manufacturers have made substantial strides in bringing modern production techniques to mortar by employing computerized technology that allows great precision in many factory settings. Therefore, rather than trusting the production process to hand mixing in unpredictable conditions, factory pre-blended mortar is becoming more and more the preferred norm for masonry construction of all types. Architects, engineers, contractors, and building owners are realizing that pre-blended mortar eliminates many of the variables and uncertainties of site-mixed mortar, thus reducing the potential for problems and liability with the finished masonry construction. In this course, we will look at the types of mortar available, the process and pitfalls of field mixing versus pre-blended mortar, and the significance of mortar in masonry assemblies.

An introduction to the use of Polyisocyanurate insulation to provide a Continuous Insulating Air & Water Resistive Barrier, providing energy efficiency, fire safety, sustainability, and a healthier indoor environment.

This is a condensed version of the 2-hour course ECH-BIM-1901: Masonry Solutions for BIM. Masonry construction presents a myriad of challenges for specifiers – especially those who are less familiar with masonry construction methods, performance standards and assembly detailing. A new wave of BIM modeling tools seeks to bridge the gap between these challenges and the extensive benefits of masonry construction, including resiliency, energy performance and unique aesthetics. This presentation provides a condensed overview of BIM and its impact on the construction industry, with a particular focus on new software tools that are changing the way masonry is designed, specified, ordered, manufactured, shipped, installed and maintained. Additionally, this course will delve into masonry building codes – with a particular focus on energy codes – and how they work together with masonry materials to deliver safer, healthier and higher-performing buildings for occupants.

This program introduces the next generation of concrete masonry units allowed by recent updates to the ASTM standard governing load-bearing Concrete Masonry Units, including discussion of the cost and structural efficiency and energy conservation benefits of these new designs.

This course covers the wall assembly thermal performance requirements of current energy codes (both the 2009 and 2012 versions of the IECC are covered). In addition, the course discusses the alternative compliance paths that are available for masonry walls under IECC and ASHRAE, including the use of COMcheck software, and provides an introduction to the basic concepts and terms that are used with respect to thermal performance. Finally the course covers how masonry wall assemblies may contribute credits under LEED.

You can REQUEST a live event at a convenient time and location for you.

There may be additional events available! See the course details page for more information.

This session will explore the most common issues that are alleged in construction defect cases. The presentation will guide the attendees through construction basics from the roof to the foundation. The most common defects in each area will be discussed, along with building code requirements, accepted industry standards, consequences and/or damages and repair recommendations.

There are many masonry options for the architect today. Besides standard cmu there are prefaced and pre-finished products that do not require additional coatings, but provide a beautiful aesthetic and performance characteristics, both for interior and exterior projects. These products include:  Glaze CMU glazed masonry units, Ground Face units, Filled and Polished Units, Shot Blasted Textured Units, Acoustical sound-absorbing units, Limestone masonry units, and Drycast Veneers. In addition, because of its modular nature, different concrete masonry units can be combined within the same wall to achieve variations in texture, pattern, and color. Because of its durable nature, and use of less embodied energy, masonry is a very environmentally friendly building product. Masonry offers a variety of different facial applications that can greatly enhance the decorative appearance of the building.

This presentation covers how to properly design a wall using proper design techniques focusing on the prevention of moisture, cracking, and cleaning issues.

This 1 hour course focuses on segmental retaining walls compared to other wall systems. Attendees learn about the advancements within this part of the industry, as well as the evolution of segmental retaining walls. Attendees will also be reviewing factors of safety. The instructor will use a powerpoint presentation and handouts during the class.

This presentation discusses the importance of detailing the building to prevent serious water issues in the envelope of a building.

Today's storms are more intense, more frequent and more deadly than ever before, making the design and construction of resilient buildings critical. The design of the building envelope – and the materials used – can be the difference between life and death. This presentation will discuss how the strength and resiliency of masonry construction can help protect a building – and its occupants – from storm damage, return structures to use faster following a disaster and reduce the long-term cost of repairs.

Architects understand how a wall is designed. But, designing a wall and putting it in place are two different skill sets. This course focuses on the methods used and challenges that occur on a jobsite during the construction of a building. Participants will learn how concrete products are made and put in place in various applications: CMU Wall Construction, Thin Veneer over CMU, Site Utilization. Hands on participation installing the various products will be a vital part of the course.

An introduction to Pre-Insulated Masonry. The course addresses the energy efficiency of pre-insulated masonry wall systems, and Energy Code compliance using such systems. The course also covers thermal performance measures and how to obtain Code-compliant values for these measures. In addition, how to detail pre-insulated walls is addressed. Finally the course addresses current topics in materials transparency and sustainability.

We will discuss how Polyiso Continuous Insulation will improve the thermal performance of walls of Steel Stud Construction. In addressing the advantages of continuous insulation – we will also address the disadvantages of using steel studs without continuous insulation. We will discuss what Sustainability d how it is measured, including – factors that are involved in addressing Building Longevity – how these concepts impact making buildings more energy efficient. We will look at various types of products that can be used to achieve designs with a perspective that address sustainable construction. Looking towards the future we will discuss the actions being undertaken in conjunction with energy conservation and construction codes, building science organizations and other groups in pushing building envelope design. We will also look at the history of Polyiso and how this product is produced from raw chemicals, creating a completed board stock product.

This course is designed to provide an understanding the importance of continuous insulation relative to mass wall of Concrete and CMU, and how the continuous insulation can help leverage the mass wall properties to stabilize the building environment. In addition, we will address how specific types of continuous insulation can function as the Air and Water Resistive Barrier System, leading to better indoor environment.

Masonry can be used for a variety of different applications. Because of its durable nature, and use of less embodied energy, it is a very environmentally friendly building product. Masonry offers a variety of different facial applications that can greatly enhance the decorative appearance of the building. This program will discuss the different ASTM specification classifications that the architect utilizes regarding masonry. The different types of masonry products are briefly discussed. Also, the IECC energy codes are discussed, as well as the environmental contribution that masonry offers the architect in the specification of building materials, including the prevention of mold in construction projects.

This course teaches how to use breakthrough concrete masonry materials technology to lower embodied carbon and reduce CO2 levels by actively sequestering CO2 from the atmosphere to construct resilient and durable building envelopes that provide beneficial performance both during construction and throughout the operational life of the structure.

This program will provide the design community with the knowledge they need to make informed decisions when specifying a simple solution for exceptional long-term thermal insulating performance and excellent air/vapor battier capability in brick and block walls.

This presentation will cover what civil engineers need to know when utilizing segmental retaining walls for grade separation in their site development plans. The presentation will introduce participants to the National Concrete Masonry Association’s Best Practices Guide for Segmental Retaining Walls focusing on recommendations relevant to Civil Engineers and discuss how they are applied to enhance the safety and longevity of structural segmental walls. Topics will include risks associated with using a “design by others” approach to segmental retaining walls and the importance of geotechnical engineering support. The presentation will address how building foundations, footers, pond applications, and fencing/guardrail codes impact the design and construction of segmental walls.

This overview of concrete floor basics shows participants how to get the most from finished concrete floors. Along the way it discusses levels of finish, hardening-densifying and other aspects of finished concrete flooring not commonly known. The program also shows how to protect and maintain finished concrete flooring. It includes tips for protecting finished floors from damage during building construction.

This course discusses the keys to designing Multi-wythe (Cavity Wall) assemblies using Concrete Masonry, with a focus on moisture control, energy conservation, structural performance and aesthetic options.

Concrete Masonry has many advantages for building envelope construction. This course explains five key unexpected advantages that are not as widely known as they should be.

You can REQUEST a live event at a convenient time and location for you.

There may be additional events available! See the course details page for more information.

While natural stone veneer has a timeless popularity in commercial and residential applications, its cost, weight, and availability can make it prohibitive for some projects. Natural-looking manufactured stone veneer alleviates those concerns but still requires time and experience in mortared stone installation. This course explores these options and then introduces the latest manufactured stone product, a panelized, mortarless veneer that installs with the ease, speed, and all-weather flexibility of siding. Application examples and case studies present the many options that offer a real stone aesthetic without the time, skill, and constraints required for mortared applications.

This program introduces building retrofits as a method to achieve green building standards by adapting existing structures. While a building retrofit may have several types of interventions, participants will learn how effective air sealing will improve overall occupant comfort, health, and safety. This includes a detailed look at sources of air leakage and the various methods to address this infiltration. Several real-world examples will demonstrate the importance of identifying source of air leakage, investigating existing conditions, and proper detailing.

You can REQUEST a live event at a convenient time and location for you.

There may be additional events available! See the course details page for more information.

High-performance coatings are a necessity when it comes to protecting building exteriors and restoring them after harsh weathering and UV degradation; the right coatings prolong a building exterior’s life span and divert materials from landfills. New PVDF coating systems provide superior protection while satisfying aesthetic and environmental considerations. Their various characteristics and benefits are explored, and application methods are discussed.

Architects are challenged when creating a design balancing resiliency, aesthetics and construction costs. How do you create a strong structure on budget without sacrificing the design values clients want. This course outlines the aesthetic opportunities with masonry materials that create great projects and build a safer Florida.

This course is a review of Masonry Best Practices in construction. Currently adopted ASTM Masonry Standards and Masonry Best Practices will be reviewed. These standards have proven over time to insure resilient structures in harsh environments. We will be summarizing material specification, flashing/weep details, differential movement, vertical relief, mock-ups and sampling.

Masonry products have greatly evolved since being introduced in the US over 150 years ago. Today, there are complete systems which target the critical needs of reducing energy costs in buildings, and consolidating multiple trades, which increases the installation efficiency. This presentation will explain why masonry products have shifted in design, and how each of the different systems address the important requirements of the architects’ projects.

This course is designed to provide an understanding of the importance of a properly designed Air and Water Resistive Barrier System. You will learn the importance of an air barrier system and how a properly designed system can contribute to the environment and improve indoor air quality. You will learn to identify the different types of air barrier systems and where each may be more appropriate. You will learn to design a system to properly control air and water vapor, and how this may differ from one area of the country to another. You will learn how to specify an air barrier system, including the performance criteria for and system, and the code requirements, testing criteria other governing factors.

This 15-minute Product SpotLight is part of the larger AEC Building Insight SpotLight Event being held January 23, 2024. Register for one session, stay for them all!

Design with Arto: Our collaboration extends beyond creativity. We partner seamlessly with design professionals, offering the capacity to deliver on large-scale projects while honoring the essence of design craftsmanship. Let's bring your visions to life, together.

Window opening air and water leakage has been a difficult problem for the construction industry. This course evaluates building failures, conventional construction approaches, and new developments in waterproofing techniques to show a path forward for designers seeking higher-performing wall assemblies.

You can REQUEST a live event at a convenient time and location for you.

There may be additional events available! See the course details page for more information.

A survey of types and causes of staining common to new masonry construction, with recommendations and guidelines for cleaning and product selection.

This course is for landscape architects seeking information about permeable pavement in commercial and residential applications. The course begins with basic information on what permeable pavement is, and how to identify it. Once that has been established, the instructor will teach correct installation methods, as well as proper maintenance for maximum permeability.

This course outlines the dangers posed by Mother Nature and the science, codes, testing and methods in which to build and combat these forces. In addition, this course addresses the value of continuous insulation to improve the energy conversation of the building. We will also address how proper incorporation of martials including continuous insulation and air and weather-barrier systems will improve indoor air quality and contribute to environmental sustainability.

High-quality masonry in tried and true finishes. Manufactured locally and tailored to each region, Echelon collection options are perfect for interior or exterior applications that will stand the test of time. In this session, we will review Echelon Masonry’s product line options, features and benefits.

A review of the ventilated facades rainscreen system, detailing the technical advantages for the architect in which potential energy efficiencies are seen, along with the reuse of existing buildings.

Concrete Masonry is an effective solution for the ever-changing design environment, as well as offer a wealth of health and safety benefits to the occupants. This one-hour HSW program will explore how to effectively design masonry walls using legacy stone products, such as Natural Limestone, Cast Stone and Architectural Stone. Attendees will learn the proper design techniques which focus on the prevention of moisture and crack control issues. Additionally, the discussion will emphasize the planning and designing of sound masonry walls using proper architectural components based on industry guidelines and specifications.

Concrete Masonry is an effective solution for the ever-changing design environment. Masonry buildings offer a wealth of health and safety benefits to the occupants, including mitigating moisture (which can lead to mold growth and degraded air quality), resiliency and the overall energy performance of the built environment. Moreover, for multi-family and light commercial, masonry stands the test of time and offers the Architect an array of aesthetic possibilities as they work to create an experience for the end user and exceed their client’s expectations.

This course will discuss the large veneers that are available for selection by the architect and the proper detailing procedures that need to be followed for moisture prevention and crack control.

Concrete masonry units create the most resilient, strongest, and affordable wall system on the market. As construction schedules tighten – speed of construction without sacrificing quality is key to the success of a project. Automated Masonry is a cutting-edge technology applied to an age-old craft. Bricks and blocks have been used for centuries to build timeless structures now we can build them robotically. New technology takes masonry construction to the next level - improving the speed and accuracy of construction while promoting creativity and resilient best practices.

Attendees will receive information about how to properly detail Cast Stone for a variety of project types. Building movement and deadloads as a function of the design requirements for veneers are discussed. The proper use of anchors, types of mortar, sealant joints and kerfs on exterior veneer applications are also addressed in this informative session. Attendees will be able to understand appropriate specification of cast stone for architectural applications

An in-depth examination of the roles masonry walls and concrete floors play in building that improve occupant well-being; environmental performance and economic returns.

Learn about PROSOCO products, tools and resources to support the design, specification, training and implementation phases of your next project. From restoration, retrofit and adaptive reuse to LEED, WELL and Living Building qualifying builds, we have the products and the people to help you realize your vision.

An introduction to air and water-resistive barriers and how they work. The role of air leakage in causing mold in walls and high energy costs is explained. The program includes discussion of the different products on the market. It also explains why contemporary building envelopes need these products now more than ever before.

This course provides architects with insights regarding the structural engineering concepts that are critical to successfully constructing concrete masonry structures.

This course discusses how designers can take advantage of the benefits of thermal mass for providing buildings that are energy efficient and passively resilient. Participants will learn how thermal mass functions, learn the definition of a mass wall, and learn how to incorporate thermal mass into typical building conditions.

You can REQUEST a live event at a convenient time and location for you.

There may be additional events available! See the course details page for more information.

This presentation will inspire designers and specifiers to utilizing concrete pavers as the best solution for innovative design. Too often spaces, such as plazas, sidewalks, entries, drop-offs, courtyards and commons, default to less creative options such as scored, poured-in-place concrete. With many important factors to consider when designing spaces, this presentation will illustrate the basic principles of design with photos from projects that have successfully demonstrated innovative concrete paver solutions. Many of these solutions implemented several concrete paver characteristics, such as style, shape, texture, color and pattern. These characteristics, as well as the technical and functional aspects of a segmental, concrete paving system, will be examined. By applying the advantages and flexibility of pavers into a selection process will translate into great design.

In this course, attendees will learn how to design walls that optimize performance for project requirements in a cost-efficient way. The course discusses initial cost and operating cost implications of exterior wall system choices. The course also discusses options to provide interior walls that save money and provide exceptional performance for demanding interior environments.

You can REQUEST a live event at a convenient time and location for you.

There may be additional events available! See the course details page for more information.

This course covers how to use the advantages of concrete masonry for the construction of detention facilities.

Wall stabilization, seismic retrofits, and helical beaming are just a few of the topics covered. With engineers on staff, PROSOCO works hand-in-hand with engineering and design teams to develop custom anchoring solutions and strategies for both new construction and restoration projects.

This course will concentrate on the Masonry QA/QC programming established in MSJC 402/602 and the importance of Pre-Bid meetings, correct scope of work and Mock Up Panels. The sole intent of the course is to ensure the owner, designer and contractor have their expectations met on the installation of masonry on their project without sacrificing the health and safety of a project from construction through occupancy. So many potential problem areas can be addressed prior to installation that can be alleviated during precon activities.

Provides an overview of the uses and benefits of water repellent concrete masonry admixtures in concrete masonry units and masonry mortar. The evolution of water repellent chemistries that enable single wythe building design is discussed including the innovative use of low-dosage, high-efficiency admixtures in the CMU and powdered admixture for preblended mortars. Context is provided on masonry building details and application of best practices by masons in the field.

This presentation originates from a research report written by the Applied Building Technology Group called Assessment of Water Vapor Control Methods for Modern Insulated Light-Frame Wall Assemblies. The report is extensive and includes compiled data from test homes, huts, and studies from the US, Canada, and Europe. The presentation utilizes the collected data from the research report in the form of a table to make easy insulation choices to prevent moisture issues. This presentation will first present the Building Science Concepts one needs to understand why things happen the way they do. The attendee will then be able to use that information to make informed decisions on how to design with wood framed construction. The presentation also breaks down some of the findings about wood sheathing and how it has been standing up over the years.

This course covers the aesthetic choices available to designers with concrete masonry, including colors, textures, scale and contours, and the best approach to the specification and construction process to achieve desired results. The course discusses how to add cost-effective aesthetic details by using specialty face designs. Finally, the course discusses considerations for using veneers or single wythe concrete masonry units.

You can REQUEST a live event at a convenient time and location for you.

There may be additional events available! See the course details page for more information.

An overview of the effects of water on masonry architecture. Types of masonry water repellents are compared and contrasted. Application methods are discussed. The program ends with a look at treatments for protecting masonry against non-water threats such as oil and graffiti.

You can REQUEST a live event at a convenient time and location for you.

There may be additional events available! See the course details page for more information.

A comprehensive plant tour at our Rmax Facility. Observe the insulation manufacturing process step by step from the initial order to the finished product by observing the raw material used, the manufacturer of the panels on the production line, panel cutting and stacking, panel wrapping and storage.

Discuss precast concrete products, aesthetic options, prefabrication, and safety benefits specifically for K-12 schools.

You can REQUEST a live event at a convenient time and location for you.

There may be additional events available! See the course details page for more information.

This presentation will focus on the changes from LEED 2009 to LEED v4.1 with information on masonry as it relates to the provisions of LEED.

Mortar used in the installation of commercial masonry projects must meet rigorous standards and precise requirements for use in the field. This presentation will discuss the composition of mortar and detail the different ASTM standards. For the architect and design professional, understanding the nuances of mortar as well ways to conduct a successful field test, is critical to a successful project completion which will help mitigate any potential challenges including water intrusion and wall strength.

This course focuses on how to use innovative concrete masonry products for the construction of retail facilities. Single wythe masonry walls are studied as a cost-effective option. The course compares the cost and performance of common wall assemblies for store construction, including their ability to meet the requirements of recent versions of the IECC. The course also highlights aesthetic detailing options, such as the use of specialty units for accent bands or window sills. Finally, the course covers the use of specialized coated masonry systems for areas requiring durable cleanable surfaces.

This course describes both the history and current use of sculptural architectural concrete masonry veneers. Participants will learn the historical evolution and development of sculptural concrete masonry veneers and their current possibilities. The course covers how to design and construct sculptural veneers to address moisture management and crack prevention, and identifies key installation and workmanship considerations. Finally, the course addresses how to use kits of sculptural concrete masonry veneers in combination to build durable, resilient, and environmentally beneficial surfaces that create visually appealing spaces that provide a creative environment for building occupants and visitors.

This course discusses the keys to successfully designing details for single wythe concrete masonry buildings, with a focus on moisture control, energy conservation, structural performance, and aesthetic opportunities.

An overview of how masonry exteriors have changed since 1949, and the challenges and procedures involved in cleaning them correctly.

You can REQUEST a live event at a convenient time and location for you.

There may be additional events available! See the course details page for more information.

This presentation teaches participants the concrete masonry wall system options available for school construction, compares the performance and cost of concrete masonry vs. framed construction, identifies the safety, security and resilience advantages of concrete masonry, and introduces how coated masonry wall systems can offer benefits for interiors spaces requiring durability or heightened hygienic conditions.

You can REQUEST a live event at a convenient time and location for you.

There may be additional events available! See the course details page for more information.

This course explores the below-grade use of polyisocyanurate (POLYISO) insulation to meet energy code and maximize thermal performance of the building foundation. Let us help dispel the myths that have been created relative to POLYISO insulation while discussing its thermal performance, water absorption, and load capacity – the three primary characteristics for below grade insulation. In addition, we will discuss how the insulation can provide protection for the foundation waterproofing system.

New technology and improvements in masonry veneer installation can help your team save time and money in the construction process while providing superior results. In this course, you'll learn how cutting-edge technology is helping masons move beyond traditional lath and scratch and be introduced to the principles behind masonry veneer installation systems (MVIS). Learn how to create permanent, high-strength installations for residential, commercial, and industrial applications using MVIS with fortified mortars and innovative waterproofing barrier membranes that protect against air and water penetration.

This presentation discusses the manufactured Dry Cast masonry, and contrasts with Wet Cast stone, both in terms of utilitarian benefits, and aesthetics.

This is Masonry 101, what to look for to avoid a bad looking job. But more importantly create a safe healthy and resilient project for your client. Everyone on the jobsite, from the mason contractor to the GC Supervision has eyes on the job. If something doesn’t look right stop that portion of the project and ask a question. We will discuss the important items an Architect should review during regular site inspections.

Many are familiar with the LEED Green Building Rating System, but there are many other options for designers and owners looking to create healthy, environmentally-conscious buildings. In this webinar we will look at two -the WELL Building Standard and the Green Globes environmental assessment program - and how they relate to, and are different from, LEED. Strategies using masonry that can be used to meet requirements in these standards will be highlighted.

Off-site construction practices for commercial projects are growing in popularity because of their ability to combat persistent industry challenges such as weather delays, skilled labor shortages, material availability issues, and price increases. While the benefits to off-site construction are undeniable, the upfront efforts required from the project team can cause apprehension. This learning will take participants on an off-site construction journey leveraging case studies to share firsthand experiences of successful projects that have been able to turn the upfront effort into a wealth of benefits.

A symposium that educates landscape architects on sustainable paving solutions for cities, communities, and campuses. Dr. William F. Hunt, III, PHD, PE from North Carolina State University will be discussing permeable paving benefits and opportunities. This symposium will highlight recent local projects successes using permeable paving to meet these new green infrastructure requirements while illustrating how they can still be functional and aesthetically pleasing. Several case studies will be examined and discussed.

Ensuring compliance with increasingly stringent energy codes is a leading architectural challenge. This course explores the latest edition of the International Energy Conservation Code (IECC) with a focus on the building envelope and how to achieve – and exceed – energy performance requirements when building with masonry.

PROSOCO has been cleaning and protecting masonry for nearly 85 years. We can help you develop solutions for cleaning the toughest masonry stains and identify treatments for long-term protection of masonry, concrete and other hard surfaces. Our field support, laboratory and customer care teams are ready to help you take on your next project.

A comprehensive look at the tools and techniques of cleaning historic architecture.“Restoration Cleaning” categorizes types of contaminants. It compares and contrasts abrasive, water and chemical cleaning. The program concludes with 10 “must know” tips for successful restoration cleaning.

This course will describe masonrys inherent characteristics and how the material has been improved in order to withstand the threat of damage from fire, moisture, and mold, meeting today's stringent code requirements and performance standards. Also discussed will be masonry's architectural options to meet pleasing contemporary design standards.

This course will address the brick manufacturing process and the design opportunities that brick offer. It will address design ideas to show examples to expand creativity. It will explore brick texture, special shapes, mortar applications, and color changes to broaden design thought and general information. We will look at the ecological benefits to using a recyclable building product, at designs which help control water by better jointing and using special shapes, and address the importance of communication with the manufacturers to better understand their capabilities.

Cohesive and resilient designs are hard to achieve. This course offers a basic review of thin veneer applications, aesthetic opportunities and specifications for vertical surfaces. Highlighting code requirements and “Industry Best Practices” for installation over various sub-straights.

This course will review the different specification types used in the CSI Specification process and how each ties into and support the other. The importance of proper specification processing for all phases of Masonry Construction from manufacturing through installation and cleaning.

In the race to address climate change, more and more industries are looking at their manufacturing practices and resultant products through the lens of sustainability. Portland Cement Association’s Roadmap to Carbon Neutrality by 2050 lays out the cement and concrete industry’s commitment to a lower carbon future and how it plans to attain that. From manufacturing cement, to building with concrete, service life impacts, and what happens at the end of a structure’s life, industry has identified current and emerging technologies to reduce its carbon footprint while continuing to serve the needs of designers, builders, and owners. Including both a high-level view of PCA’s Roadmap and a specific focus on portland-limestone cement (PLC), one approach to lower concrete’s CO2 footprint that can be readily implemented today, this program offers an understanding of bold changes coming to the construction industry.

An introduction to the history, manufacturing, and use of Polyisocyanurate Insulation in Commercial and Residential Construction and address how these products can contribute to energy efficiency, fire safety, sustainability, and a healthier indoor environment.

An overview of existing masonry and stone façade instability issues, the cause and recognition of these problems, and the cost-effective re-anchoring solutions for repair involving various masonry wall construction techniques. A detailed look into the different types of retrofit anchoring systems available to stabilize existing masonry and stone facades.